Aqara Temperature and Humidity Sensor User manual

Temperature and Humidity Sensor

English
Temperature and Humidity Sensor
Quick Start Guide
Aqara Temperature and Humidity Sensor monitors and
records indoor temperature, humidity and atmospheric
pressure in real time.The current and historical data is
displayed in the app. It can also trigger other smart
accessories to automate your home.
* A hub is required.
* Aqara Hub is required to enable Aqara Temperature and Humidity
Sensor to work with HomeKit technology. See www.aqara.com for
more details.
* This product is for indoor use only.
Indicator Light
Reset Button
Long Press for 5s: Reset/Connect to
Network
Single Press: Eective Range Test
Product Introduction

English
1. Before activating the accessory, please make sure you
have the Aqara Home app downloaded and Aqara hub
installed.
Quick Setup
Eective Range Test: Single press the reset button on the
accessory at your desired position. If the Hub makes voice
prompts, it indicates that the accessory can
communicate eectively with the Hub.
2.
* Avoid metal surface to maximize signal strength.
Installation
Option 1: Place it directly in the desired position.
Please open the app, tap“Home”and then tap“+” in the
top right corner to enter“Add Device (Accessory)” page.
Select “Temperature and Humidity Sensor”, and add it
according to instructions.
* If the connection fails, please move the accessory closer to the
Hub and try again.

English
Model: WSDCGQ11LM
Dimensions: 36 × 36 × 9 mm (1.42 × 1.42 × 0.35 in.)
Wireless Protocol: Zigbee
Battery: CR2032
Temperature Range and Precision: -20° – +50°C, ±0.3°C (-4° –
122°F，±0.54°F)
Humidity Range and Precision: 0 – 100% RH, ±3%
Atmospheric Pressure Range and Precision:
30 kPa – 110 kPa, ±0.12 kPa
Maximum Transmit Power (Zigbee): 9.99 dBm
Working Frequency: 2400 MHz – 2483.5 MHz
Specications
* Keep the surface clean and dry.
Option 2: Remove the protective lm, and stick it to the
desired position.

English
This product is NOT a toy. Please keep children away from
this product.
This product is designed for indoor use only. Do NOT use in
humid environments or outdoors.
Beware of moisture, do NOT spill water or other liquids
onto the product.
Do NOT place this product near a heat source. Do NOT
place it in an enclosure unless there is normal ventilation.
Do NOT attempt to repair this product by yourself. All
repairs should be performed by an authorized professional.
This product is only suitable for improving the
entertainment, convenience of your home life and
reminding you about the device status. If a user violates
the product use instructions, the manufacturer will NOT be
liable for any risks and property losses.
Warnings
Online Customer Service: www.aqara.com/support
Email: [email protected]
Manufacturer: Lumi United Technology Co., Ltd.
Address: 8th Floor, JinQi Wisdom Valley, No.1 Tangling Road,
Liuxian Ave,Taoyuan Residential District, Nanshan District,
Shenzhen, China.
1.
2.
3.
4.
5.
6.