
3.1. Instructions on button functions
3.2. Instructions for installation
This product can be placed at any location without being installed.
Please put the cube on a flat and hard surface prior to use. Some actions may not be identified if the
cube is put on the surface of a soft object such as sofa, bed and pillow.
* In case of any addition failure, please move this product closer to the gateway and try again.
Activate the APP, click the "+" on the top right corner of the first page, enter the page for “Adding
the Device” (accessories) , select “Cube Controller”, and proceed with your operations according to
* In case of any addition failure, please move the gateway closer to this product and try again.
Effective distance verification: After pressing the button “Device Reset”, the gateway sends out a
cue note, indicating that effective communication is available between the device and the gateway.
Search for the device: Activate the APP, enter the page "List of Devices (Accessories)". After
pressing the button “Device Reset”, the gateway sends out a cue note, while the corresponding
device icon on the APP will flash.
* This function is supported by Aqara Home APP only.
To verify the effective distance and search for the device