Aqara Smart Roller Shade Controller User manual

01
01
Aqara Smart Roller Shade Controller Manual
10
Aqara智慧管狀電機使用說明書
17
Bedienungsanleitung des Aqara
Smart-Rolladenkontrollers
26Manuel du Controller de Aqara Smart Roller Shade
Manuale del controllore di ombreggiatura a
rullo intelligente di Aqara 35
Manual de Instrucciones del Motor Tubular Aqara Smart 44
Руководство по эксплуатации для рулонных
штор Aqara 54

Product Introduction
The Aqara Smart Roller Shade Controller is an electric
smart curtain motor, which can automate ordinary roller
blinds, Shangri-La blinds and other curtains. It has a
built-in Zigbee wireless communication module. Paired
with a hub device, it can realize functions such as remote
control, timing opening and closing of curtains, and smart
connection of several devices.
*This product needs to be paired with an Aqara device with hub function.
01 02
Power cable
Control box
Motor
RJ11 Port
Reset button
Up button
Stop button
Down button

Installation Guide
01 02 03
Stroke support
Tail insert bracket
Crown
Runner
Circlip

1. Before activating the accessory, please make sure you
have the Aqara Home app downloaded and the Aqara
hub installed.
Quick Setup
1.
2.
3.
4.
5.
6.
Notes
Since the installation process of this product involves
strong current, please entrust professional curtain
installer to install it according to the specifications;
This product is for indoor use only. Please do not use it
in the humid environment or outdoor;
Keep moisture away from product, and do not spill
water or other liquid on the product;
Keep product away from heat source;
Do not attempt to maintain the product by yourself. The
maintenance should be done by an authorized
professional;
Under normal use, this equipment should be kept a
distance of at least 20cm between the antenna and the
user.
Put the motor into the wall of the shutter pipe and fix it
firmly. Connect the control box to the RJ11 interface.
02 03 04
220-230V~50HZ
1 Blue wire=Neutral wire
2 Brown wire=Live wire
3 Yellow-green wire=Ground wire

2. Open the app, click "+" in the upper right corner of the
homepage, enter the "Add Device (Accessory)" page,
select Aqara Smart Roller Shade Controller, and operate
according to the prompts.
Effective distance verification: At the preselected
installation location, press the device reset button once,
and the Hub will give a prompt tone, indicating that
effective communication is possible between the device
and the Hub.
03 04 05
*If the addition fails, please move the Hub closer to the device and try
again.
Operating Instructions
Operating Instructions
Adjust the curtain to the required up/down travel point
with the up button, down button and stop button. Aer
determining the position, press the stop key for 5 times
in quick succession, and the motor rotates forward and
backward once each, indicating that the up/down travel
point is set successfully.
At the same time, press the up button + down button for
3 seconds. Aer the blue light is on, the indicator light
will be loosened. The positive and negative rotation of
the motor will be done once each, indicating the motor
has been deleted successfully.
Long press the stop button 5s and release the blue
light aer it lights up.
The positive and negative rotation of the motor is 1
time each, indicating the motor reversing
successfully.
Delete travel
Motor
direction
reversal
Function
Set up/
down travel

Product name: Aqara Smart Roller Shade Controller
Product model: SRSC-M01
Rated voltage: 220-230V~ 50Hz
Rated power: 121W
Rated current: 0.53 A
Executive standard: Q/QLML016
Operating temperature:-10℃~+40℃
Operating humidity: 10%~95% RH, non-condensing
Pipe diameter: 35mm
Rated torque: 8N·m
Rated rotor speed: 17 r/min
Basic Parameters
State descriptionIndicator color
Power on or click
the button
Blue light flashes
The device has connected
to the network and the
motor is running
Blue light is steady on
Connecting to the network
The blue light continues
to flash quickly
The device has not
connected to the network
and the motor is running
Red indicator light
flashes slowly
Indicator light description
04 05 06

Online Customer Service: www.aqara.com/support
Email: [email protected]om
Manufacturer: Lumi United Technology Co., Ltd.
Address: 8th Floor, JinQi Wisdom Valley, No.1 Tangling Road,
Liuxian Ave, Taoyuan Residential District, Nanshan District,
Shenzhen, China.
1.
2.
3.
4.
WARNING: Important safety instructions. It is important
for the safety of persons to follow these instructions.
Save these instructions.
WARNING: Important safety instructions.Follow all
instructions since incorrect installation can lead to
severe injury.
WARNING: the drive shall be disconnected from its
power source during cleaning, maintenance and when
replacing parts.
This appliance should not be used by children under 8
years old. This is not a toy and children should not play
with the appliance. Cleaning and user maintenance
should not be done by children. This appliance can be
used by children aged 8 years or older or persons with
Warnings:
Wireless connection: Zigbee
Working system: S2 4min
Zigbee Operation Frequency: 2405-2480 MHz
Zigbee Maximum Output Power: ≤13 dBm
05 06 07

5.
6.
7.
8.
9.
reduced capacity if they have been given instruction
concerning using the appliance in a safe way and
understand the hazards involved.
Do not allow children to play with fixed controls. Keep
remote controls away from children.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
The supply cord of this drive can only be replaced by the
same type of cable supplied by the manufacturer of the
drive.
Fequently examine the installation for imbalance and
signs of wear or damage to cables springs and fixings.
Do not use if repair or adjustment is necessary. It is
recommended to check the product once a year.
Do not operate when maintenance, such as window
cleaning, is being carried out in the vicinity.
06 07 08
10.
11.
12.
13.
Disconnect the drive from the supply or switch off the
automatic controls when maintenance, such as window
cleaning, is being carried out in the vicinity.
Before installing the drive, remove any unnecessary
cords or components and disable any equipment not
needed for powered operation.
Install the actuating member of any manual release at a
height less than 1,8 m.
The type of driven part the drive is intended for Electric
curtain machine.

07 08 09
14. The A-weighted emission sound pressure level of the
drive is equal to or less than 70 dB(A), e.g. by writing LpA
≤ 70 dB(A).
Rated operating time 4min;
Minimum tube diameter needed to insert tubular
drives:35mm.
Note
EU Declaration of Conformity
Hereby,[Lumi United Technology Co., Ltd.]
declares that the radio equipment type[Aqara Smart
Roller Shade Controller, SRSC-M01]is in compliance with
Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
https://www.aqara.com/DoC/
WEEE Disposal and Recycling Information
All products bearing this symbol are waste electrical
and electronic equipment (WEEE as in directive
2012/19/EU) which should not be mixed with unsorted
household waste. Instead, you should protect human health
and the environment by handing over your waste equipment
to a designated collection point for the recycling of waste
electrical and electronic equipment, appointed by the
government or local authorities. Correct disposal and
recycling will help prevent potential negative consequences

08 09
to the environment and human health. Please contact the
installer or local authorities for more information about the
location as well as terms and conditions of such collection
points.