araknis AN-110-SW-C-5P User manual

110 SERIES COMPACT NETWORK SWITCHES
Quick Start Guide
AN-110-SW-C-5P
AN-110-SW-C-8P
AN-110-SW-C-16P

3
110 Series Compact Network Switches
Quick Start Guide
© 2017 Araknis Networks®
FCC Warning
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.
1
2
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operations of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at his own expense.

4
110 Series Compact Network Switches
Quick Start Guide
CE Warning
This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the
user may be required to take adequate measures.
UL Statement
All models have been evaluated by UL.
This device is intended for indoor use only. It should not be connected to an Ethernet network with outside plant
routing.
This product is intended to be supplied by a Listed Power Adapter marked “L.P.S.” and output rated 48VDC, 1A
minimum.

5
110 Series Compact Network Switches
Quick Start Guide
© 2017 Araknis Networks®
Welcome to Araknis Networks™
Thank you for choosing an Araknis 110-series Compact Network Switch. This PoE-powered switch features Gigabit
connectivity on all ports, updated modern aesthetics, and a level of control (Unmanaged+) rarely seen in unmanaged
solutions. The Araknis 110-series switch is a sleek and highly capable addition to any network.
Features
• Gigabit Ethernet
• 1x 802.3at PoE-IN, 1x 802.3af PoE-OUT
• Multi-mounting can design
• Unmanaged+ switch
• OvrC enabled
Dimensions (W x H x D)
• 5 Port: 6.21" x 1.50" x 4.13"
• 8 Port: 8.21" x 1.50" x 4.13"
• 16 Port: 12.71" x 1.50" x 4.13"
Operating Temperature
• 32-122°F (0-50°C)

6
110 Series Compact Network Switches
Quick Start Guide
Step 1: Unbox
Switch
Quick Start Guide
Rubber Feet (4) Structured Wiring
Can Mounting Kit
w/ Push Pins (2)
VersaBox Shelf
Mounting KIt
Wall Mount Kit Power Supply
AN-ACC-PS-48V1A
(Sold separately)
Spare Can Mounting
Push Pins (4)
Body: 8.5mm(D), 10.4mm(L),
6.35mm(W)
Pin: 8.5mm(D), 18.2mm(L),
3.7mm(W)

7
110 Series Compact Network Switches
Quick Start Guide
© 2017 Araknis Networks®
Step 2: Install
110 compact switches feature several mounting options for easy setup in any scenario. See the following pages for
specific instructions.
Shelf
(use included rubber feet)
Wall Structured Wiring Can Strong™ VersaBox™
Shelf

8
110 Series Compact Network Switches
Quick Start Guide
Structured Wiring Can Installation
NOTE: The switch may only be mounted to the structured wiring can with the Ethernet ports facing right or left.

9
110 Series Compact Network Switches
Quick Start Guide
© 2017 Araknis Networks®
Strong™ VersaBox™ Shelf Installation
NOTE: 5 and 8-port models may be positioned with the Ethernet ports facing any direction. 16-port models fit only as shown.

10
110 Series Compact Network Switches
Quick Start Guide
Step 3: Connect
The switch may be powered using either PoE or optional power supply (AN-ACC-PS-48V1A), sold separately. PoE
OUT port functionality varies depending on model and power input type.
15W OUT
ACTIVE PoE/+
30W IN
PoE 802.3af IN (15W)
LAN Only, no PoE out
15W OUT
ACTIVE PoE/+
30W IN
PoE+ 802.3at IN (30W)
PoE 802.3af OUT (15W)1
PoE+ IN (30W)
APoE IN (15W) B
NOTE: 1For 16P, when powered via 802.3at, only supports dis-
tance under 50m.

11
110 Series Compact Network Switches
Quick Start Guide
© 2017 Araknis Networks®
15W OUT
ACTIVE PoE/+
30W IN
AN-ACC-PS-48V1A IN
PoE 802.3af OUT (15W)
PoE Specifications
AN-110-SW-C- 5P 8P 16P
PoE Out Port 4 7 15
PoE In Port 5 8 16
Power Input AN-ACC-PS-48V1A
Power Consumption
Power On 3.03W 3.37W 5W
Full load w/o
PoE Out 4.7W 6W 11.22W
Full load with
PoE Out (max) 23.20W 24.4W 30W
PoE Specification – PoE Out Port Max Output: 15.4W
Power Supply IN
C
NOTE: 100m PoE output distance guaranteed only when pow-
ered by DC adapter.

12
110 Series Compact Network Switches
Quick Start Guide
Step 4: Verify
1. Power LED – On: system is up.
O: system is down.
2. 1Gbps LED – On: port connected at 1Gbps speed.
O: port is connected at 10/100Mbps speed.
3. Link/Act LED – On: port is connected to another device.
Blinking: packets are running through the port.
O: port is not connected to a device.
A
B
C

13
110 Series Compact Network Switches
Quick Start Guide
© 2017 Araknis Networks®
Step 5: Claim on OvrC
ENABLED
Web Browser
Access
Mobile
Apps
AN-110-SW-R-8
1 2 3 4 5 6 7 8
1 Gbps
Link/Act
OvrC provides remote firmware upgrades, real-time notifications, and intuitive customer management, right from
your computer or mobile device. Setup is plug-and-play, with no port forwarding or DDNS address required. To add
this device to your OvrC account:
Connect the switch to the network (Internet access required).
Log Into OvrC (www.ovrc.com) or load the OvrC app.
Add the device (MAC address and Service Tag numbers needed for authentication).
A
B
C

14
110 Series Compact Network Switches
Quick Start Guide
Pro Tip: Rebooting the Switch
15W OUT
ACTIVE PoE/+
30W IN
Reboot – Press and hold the RESET button on the back of the
switch for 5 seconds, then release. The switch will power
cycle and the front status lights will flash.
Factory Reset – Press and hold the RESET button for 10-15 seconds until
the status LEDs flash once. The switch will power cycle
and be reset to factory default settings.

© 2017 Araknis Networks®
170710-0939
2-Year Limited Warranty
Araknis Networks® products have a 2-Year Limited Warranty. This warranty includes parts and labor repairs
on all components found to be defective in material or workmanship under normal conditions of use. This
warranty shall not apply to products that have been abused, modified, or disassembled. Products to be
repaired under this warranty must be returned to a designated service center with prior notification and
an assigned return authorization (RA) number. Contact technical support for an RA number.
Contact Information
araknisnetworks.com
Technical Support [phone]
[e-mail]
The latest version of this QSG may be found on the product page support tab.
W
P
E