Aram ASM 100 User manual

User Manual
100

ⅰ. Settings
ⅱ. Full Analysis
ⅲ. View Mode
Summary
ⅰ. Email
ⅱ.Mirroring
CRM
Moisture
Sebum
Pore
Melanin
Acne
Wrinkle
Sensitivity
12
13
14
15
16
17
18
19
20
23
22
21
25
26
Application
Warranty
※Notes on use
· The images of this manual can be different with the actual things.
·
The information contained in this manual and future improvements are subject to change
without
notice.
· The latest version of the manual will be updated at the below link.
http://www.aramhuvis.com/downloads
H/W Parts
System Settings
ⅰ. Both Sides
ⅱ. Device Settings
ⅰ. Date &Time
ⅱ. Wi-Fi
ⅲ.Sleep
ⅳ.Language
3
4
5
7
9
10
11
Components
Contents

Main unit with skin lensSkin lens (ASM-100)
Charger
Cleaning cloth ManualUSB cable Air blower
Cradle Sebum paper
(100ea)
Components
3
Components

ASM lens
Indicate LED
Lens change button
USB slot
On/off button
Flash
X1 lens
Volume up & down button
4
H/W Parts
Both Sides

1
2
Settings
5
How to turn on the power
Press and hold “Power” button.
Take your finger off from the button
after "Indicate LED" turned on blue.
1
2
How to turn off on the power
Press and hold “Power” button.
Touch "Power off".
1
2
Components

Device Settings
6
H/W Parts
Charger can be used for American type & European type. The default is
European type.
Push the plug up.
1
Then 220V European type is disassembled
and you can see the 110V-220V
American type inside of the charger.
2
3
Choose the one you want to use and connect USB cable in adaptor.

Go to "Date & time"
Go to "Set date". Check if the setting is
correctly applied.
Touch button.
Select the date and touch
“OK” button.
Touch button.
Date & Time
7
System Settings
4 5 6
1 2 3

Touch “Select time zone” Check if the setting is
correctly applied.
Touch “Set time”.
Select proper time zone.
Change into the current time
and touch “OK” button.
Check if the setting is
correctly applied.
Date & Time
8
System Settings
10 11 12
7 8 9

Touch “Wi-Fi”. Choose proper Wi-Fi signal.
Turn on Wi-Fi using
On/Off button
Put Wi-Fi password.
Wait until the device is
connected to Wi-Fi.
Wi - Fi
9
System Settings
4 5
1 2 3

Once the device is connected to Wi-Fi,
you could see the Wi-Fi mark on upper side
of the screen.
Wi-Fi Usage
☞ Email
Wi-Fi connection is needed to send analysis
data by email.
*Reference : page 7 (Wi-Fi), page 20(Email).
☞Software update
In order to update the software version.
Touch “Display”.
1
Go to "Sleep". Select the option you want
to apply.
3
Sleep
Wi - Fi
10
System Settings
6
1 2 3