Arbor Technology Fortem User manual

Phone number: 01945 410950 [e-mail]
http://www.arborgardensolutions.co.uk
Trading address: Unit 11, Cattle Dyke, Wisbech, England, PE1 34NR
Fortem Picnic Table and Bench set assembly instructions
Before you commence the assembly process, we recommend that you read these instructions
thoroughly beforehand to familiarise yourself with the assembly process and to also check that you
have the correct components. If for any reason you need assistance, you can find our contact details
on the top of page of these instructions.
We highly recommend that any assembly is carried out on a flat, level surface if possible and that you
use another person to assist you if necessary for your convenience all guide holes are pre-drilled.
You can check our YouTube channel for assembly video.
Please click here
Package contents:
•1x Tabletop
•2x Seats
•2x Table A-Frames
•2x Cross braces
•1x Bundle with fixings
Tools required:
10mm socket head
Spanner or battery-operated drill
Hex key

Phone number: 01945 410950 [e-mail]
http://www.arborgardensolutions.co.uk
Trading address: Unit 11, Cattle Dyke, Wisbech, England, PE1 34NR
Step 1
Step 2
Step 3
Step 4
Lay the tabletop upside down on a clean, flat surface
taking care not to damage it. Now line up one of the
table A-frames centrally on the tabletop as shown in
step 2.
Place one of the table A-frames centrally against the
fixing batten ensuring that the gap at the table edge is
the same on both sides.
Now, using 2 of the supplied coach screws and the pre-
drilled holes, secure the table A-frame to the fixing
batten on the tabletop.
Ensure that the brace is lined up centrally on the table
and attach it to the A-frame with a coach screw. Make
sure that the brace is still aligned centrally on the table
and affix the other end to the tabletop with a coach
screw as shown. Repeat steps 1-4 to finish the table
assembly and proceed to step 5.

Phone number: 01945 410950 [e-mail]
http://www.arborgardensolutions.co.uk
Trading address: Unit 11, Cattle Dyke, Wisbech, England, PE1 34NR
Step 5
Step 6
Align the seat panel batten with the outer end of the
A-frame as shown and repeat for the other end of the
seat panel. Using the coach screws provided attach the
seat panel to the A-frame at both ends of the bench.
Finally, cover any exposed coach screw heads with the
cover caps provided. Your Classic Pub Style picnic
bench and the table are now complete.
Your picnic table and bench set are now completed!
We hope that you found your product quick and easy to assemble but if not and you require further assistance
or have any questions you can contact us via details above.
Also, you can check our YouTube channel for assemble videos, click on the link below:
https://www.youtube.com/watch?v=wi5hhhk76ec&t=29s
Or
Type in YouTube search box Arbor Garden Solutions.