Arbor Technology Quadrum User manual

01945 410950 [e-mail]
http://www.arborgardensolutions.co.uk
Trading address: Unit 11, Cattle Dyke, Wisbech, England, PE1 34NR
Quadrum picnic table and benches
Before you commence the assembly process, we recommend that you read these instructions
thoroughly beforehand to familiarise yourself with the assembly process and to also check that
you have the correct components. If for any reason you need assistance, you can find our
contact details on the top of page of these instructions.
We highly recommend that any assembly is carried out on a flat, level surface if possible and
that you use another person to assist you if necessary.
You can check our YouTube channel for assemble video.
Please click here
Package contents Tools required
1x Tabletop 10mm socket or spanner
4x Benches
4x table legs
8x braces
Bundle with fixings

01945 410950 / 07415918823 / 07552049343
[e-mail] http://www.arborgardensolutions.co.uk
Trading address: Unit 11, Cattle Dyke, Wisbech, England, PE1 34NR
Step 1
Step 2
Your picnic table and benches are now completed!
We hope that you found your product quick and easy to assemble but if not, remember you can
always check our YouTube channel for assembly video –just type into YouTube search “Arbor
Garden Solutions –Quadrum picnic table and benches”
Or click on the link below:
https://www.youtube.com/channel/UC3b2MzAv6fTkCPnC3QF7V9w
Or if you require further assistance or have any questions you can contact us via details above.
Place tabletop upside down and using 2 of the supplied coach
screws and the pre-drilled holes, secure the table legs to the
fixing batten on the table. Please, make sure that table leg
edge is flush with table brace. Repeat this until all four legs are
secured.
Place provided bracers as shown in the picture.
Make sure its aligned and secure it with
provided coach screws. Repeat until all sides
are done.