Archos 50 Cesium User instructions

Smartphones & Tablets | Windows™
How to restore my ARCHOS 50 Cesium to its
default settings ?
This process is recommended for your device if : it is frozen, it
doesn’t turn on or you are experiencing a software issue. It will allow you
to perform a low level format on your device. Thus all the data will be
deleted, you won't be able to retrieve them.
1. We strongly recommend to back them up first.
2. Keep in mind that your device’s battery must be charged enough to
perform this operation.
1. If you can have access to the Windows Phone® interface
a. Press the ON/OFF button to turn on your device
b. On the device's homescreen, pull down the status bar and select All
settings
c. In the System section, scroll up the menus then select about >
reset your phone
2. If you can’t access the Windows Phone® interface
a. Turn off the mobile phone (you can also remove the battery and
replace it to turn off the phone)
b. Hold Volume - then plug your phone to the power connector until a
question mark is displayed
c. Press once the following buttons one after the other : Volume +,
Volume -, ON/OFF, Volume -
d. The mobile reboots and a notched wheel displaying the running
process appears. After a certain period of time, your mobile phone
will reboot. At the end of the resetting process, your mobile phone
Page 1 / 2
(c) 2021 ARCHOS <[email protected]> | 2021-09-17 16:12
URL: http://faq.archos.com//index.php?action=artikel&cat=1&id=384&artlang=en

Smartphones & Tablets | Windows™
will ask you to do the setup through a wizard
If the question mark is not displayed or
you missed a step, restart the whole
process.
Unique solution ID: #1738
Author: Admin FAQ
Last update: 2016-02-11 16:09
PoweredbyTCPDF(www.tcpdf.org)
Page 2 / 2
(c) 2021 ARCHOS <[email protected]> | 2021-09-17 16:12
URL: http://faq.archos.com//index.php?action=artikel&cat=1&id=384&artlang=en