Archos 50 Saphir Installation and user guide

Saphir Series
How to reinitialize my ARCHOS 50 Saphir?
This process is recommended for your device if : it is frozen, it doesn’t turn on or
you are experiencing a software issue. It will allow you to perform a low level format
on your device. Thus all the data will be deleted, you won't be able to retrieve them.
We strongly recommend to back them up first. Keep in mind that your device’s
battery must be charged enough to perform this operation.
Since Android™ 5.0, your device is linked to your Google™ account. If you reset
your device from the recovery menu (method 2), you will have to set the same
Google™ account you filled in the last wizard. If you reset your device in order to
resell it, please use the method 1.
If you can have access to the Android™ interface
1. Select the Settings app then select Backup & reset > Factory data reset.
2. Select Reset phone and confirm by pressing Reset Phone.
If you can’t access the Android™ interface
1. Turn off the phone.
2. Press & hold Volume + and hold ON/OFF to turn on the device.
3. On the boot selection menu, release the buttons. Scroll down using Volume
+, choose "Recovery mode" and confirm with Volume -.
Use the Volume buttons to navigate and the ON/OFF button to validate.
Select "Wipe data/factory reset" and validate.
Select "Yes -- delete all user data" and validate to remove all the user data.
At the end of the process, select "Reboot system now" and validate to
restart the device.
If you failed to access to the recovery
Page 1 / 2
(c) 2023 ARCHOS <[email protected]> | 2023-12-17 04:43
URL: http://faq.archos.com//index.php?action=artikel&cat=150&id=524&artlang=en

Saphir Series
menu, please start again from the
beginning.
Unique solution ID: #2006
Author: Djibril
Last update: 2017-01-31 12:18
PoweredbyTCPDF(www.tcpdf.org)
Page 2 / 2
(c) 2023 ARCHOS <[email protected]> | 2023-12-17 04:43
URL: http://faq.archos.com//index.php?action=artikel&cat=150&id=524&artlang=en