Archos Titanium Series Installation and user guide

Titanium Series
How to reinitialize my ARCHOS 40 Titanium ?
This process is recommended for your device if : it is frozen, it
doesn’t turn on or you are experiencing a software issue. It will allow you
to perform a low level format on your device. Thus all the data will be
deleted, you won't be able to retrieve them. We strongly recommend to
back them up first. Keep in mind that your device’s battery must be
charged enough to perform this operation.
1. If you can have access to the Android™ interface
a. Select the Settings app then select Reset > Factory data reset
b. To delete music, photos and other user data, you must erase the
internal SD card. Tick "Erase phone storage"
c. Select "Reset phone" and confirm
2. If you can’t access the Android™ interface
a. Turn off the device by using ON/OFF (remove then replace the
battery if necessary)
b. While holding Volume +, press ON/OFF until the device turns on
c. On the select boot mode screen, use Volume + to select "Recovery
mode" and confirm with Volume -
d. When the green robot is displayed, hold Volume + and press once
ON/OFF
Use Volume - to navigate and Volume + to validate.
If you failed to access to the recovery
menu, please start again from the
Page 1 / 2
(c) 2020 ARCHOS <[email protected]> | 2020-07-01 17:11
URL: http://faq.archos.com//index.php?action=artikel&cat=137&id=123&artlang=en

Titanium Series
beginning.
a. Select "Wipe data/factory reset" and validate to restore your device
to its default settings.
b. Select "Yes -- delete all user data" and validate to remove all the
user data.
c. Select "Reboot system now" and validate to reboot the device.
Unique solution ID: #1133
Author: Admin FAQ
Last update: 2014-06-27 12:00
PoweredbyTCPDF(www.tcpdf.org)
Page 2 / 2
(c) 2020 ARCHOS <[email protected]> | 2020-07-01 17:11
URL: http://faq.archos.com//index.php?action=artikel&cat=137&id=123&artlang=en