Arctiko FLEXA 110 User manual

MOUNTING INSTRUCTIONS
FOR STACKING KIT
FLEXA 110 / 120 MODELS

5085073-01 2
Remove the two black screws that fix the top on the back of the
appliance and save them for step 3.
Place the stacking kit on the top of the appliance. The ventilation area
must be positioned to the front and the holes for the screws must be in
line with the holes on the rear side of the appliance.
1x DAI 3511 1
Instruction
1x DAI 3511 2

5085073-01 3
Fix the stacking kit to the top reusing the black screws removed in the
first step.
Unscrew the 4 levelling feet on the bottom of the appliance which will
be placed on top of the stacking kit, until the levelling feet can enter into
the defined holes in the top of the stacking kit.
1x DAI 3511 3
1x DAI 3511 4
Continuing
on next page

5085073-01 4
Place the appliance above the other. Be sure that the levelling feet fit the
holes. To place it correctly, push the upper appliance backwards until the rear
side is aligned with the lower appliance.
5

5085073-01 5
The final look of the stacked appliances should be like the images below.
The front and rear side of the appliances should be aligned.
6

ARCTIKO A/S | Oddesundvej 39 | 6715 Esbjerg N | Denmark
[phone] | www.arctiko.com | [e-mail]
03/07/2019
5085073-01-GB