ARDES AR5R04 User manual

IT ISTRUZIONI PER L’USO
EN INSTRUCTIONS FOR USE
DE BEDIENUNGSANLEITUNG
CZ NÁVOD K POUŽITÍ
SK NÁVOD NA OBSLUHU
EL ΟΔΗΓΙΕΣ ΧΡΗΣΗΣ
RAFFRESCATORE EVAPORATIVO
AIR COOLER
KÜHLER
OCHLAZOVAČ VZDUCHU
OCHLADZOVAČ VZDUCHU
ΕΠΙΔΑΠΕΔΙΟΣ ΑΕΡΟΨΥΚΤΗΡΑΣ EOLO MINI
AR5R04
RAFFRESCATORE EVAPORATIVO
AIR COOLER
AR5R04
Il presente apparecchio può essere
utilizzato dai bambini a partire da 8
anni in su e da persone dalle ridotte
capacità siche, sensoriali o mentali,
oppure con mancanza di esperienza e
di conoscenza se a loro è stata assi-
curata un’adeguata sorveglianza, op-
pure se hanno ricevuto istruzioni circa
l’uso in sicurezza dell’apparecchio e
hanno compreso i pericoli correlati.
I bambini non devono giocare con l’ap-
parecchio. Le operazioni di pulizia e di
manutenzione non devono essere ef-
fettuate dai bambini senza sorveglian-
za.

2
Se il cavo di alimentazione dovesse
essere danneggiato, deve essere so-
stituito solamente presso i centri di as-
sistenza autorizzati dal costruttore.
Spegnere l’apparecchio e scollegarlo
durante le operazioni di riempimento e
pulizia.

3
Avvertenze IT
ATTENZIONE: leggere attentamente il presente libretto in quanto
contiene importanti istruzioni per la sicurezza di installazione, uso
e manutenzione.
Istruzioni importanti da conservare per riferimenti futuri.
I bambini NON devono giocare con il dispositivo.
Questo apparecchio dovrà essere destinato solo all’uso per il quale è
stato espressamente concepito; qualsiasi impiego non conforme alle
indicazioni contenute nel presente manuale è da considerarsi improprio
e pericoloso. Il produttore non può essere ritenuto responsabile per
eventuali danni derivanti da utilizzo improprio e/o irragionevole.
Questo apparecchio NON è idoneo per impiego in ambienti con atmosfere
esplosive (con presenza di sostanze inammabili sotto forma di gas,
vapore, nebbia o polvere, in condizioni atmosferiche in cui, dopo
l’accensione, la combustione si propaga nell’aria).
Gli elementi dell’imballaggio (sacchetti in plastica, polistirolo espanso,
etc.) non devono essere lasciati alla portata di bambini o incapaci in
quanto rappresentano potenziali fonti di pericolo.
L’installazione/assemblaggio del dispositivo dovrà essere effettuata/o
secondo le prescrizioni del costruttore. Una errata procedura può
causare danni a persone, animali o cose, per i quali il costruttore non
può essere ritenuto responsabile.
Posizionare ed utilizzare l’apparecchio su un piano d’appoggio
orizzontale e stabile.
Prima di utilizzare l’apparecchio vericare visivamente l’integrità del
medesimo e del suo cavo di alimentazione. In caso di dubbi rivolgersi a
personale qualicato.
Prima di alimentare l’apparecchio accertarsi che i suoi dati di
targa (tensione e frequenza) siano rispondenti a quelli della rete di
distribuzione elettrica e che la presa sia idonea al terminale del cavo di
cui l’apparecchio è dotato.
Vericare che l’impianto elettrico utilizzato per l’alimentazione sia dotato
delle adeguate protezioni a norma delle leggi in vigore.
NON alimentare l’apparecchio mediante prese multiple.
Evitare se possibile l’impiego di adattatori e/o prolunghe; qualora il loro
impiego si rendesse indispensabile utilizzare esclusivamente materiale
conforme alle vigenti norme di sicurezza e nel rispetto dei parametri
elettrici degli adattatori in questione.
L’apparecchio non deve essere acceso mediante temporizzatori esterni
e/o altri dispositivi di controllo remoto non espressamente previsti dal
presente manuale.
NON utilizzare né conservare il dispositivo in prossimità di fonti di calore

4
localizzate (caloriferi, stufe etc.).
NON immergere l’apparecchio in acqua o altri liquidi; in caso di caduta
accidentalmente in acqua NON cercare di recuperarlo ma innanzitutto
scollegare immediatamente il cavo di alimentazione dalla presa elettrica.
Utilizzando l’apparecchio per la prima volta, assicurarsi di aver tolto ogni
etichetta o foglio di protezione che ne impedisca il corretto funzionamento.
Collegare e scollegare il cavo di alimentazione con le mani asciutte e
reggendolo saldamente.
Prima di inserire la spina nella presa di corrente assicurarsi che il
pulsante di avviamento dell’apparecchio sia in posizione “OFF” (spento).
Svolgere sempre totalmente il cavo di alimentazione onde evitare
surriscaldamenti, evitare in ogni caso di tenderlo (non tirarlo, strattonarlo,
né utilizzarlo per trascinare il dispositivo cui è collegato).
Evitare di posizionare il cavo di alimentazione su superci abrasive
o taglienti o comunque in posizioni dove può essere facilmente
danneggiato.
NON ostruire né totalmente né parzialmente le prese d’aria nè inserirvi
oggetti all’interno.
Durante il funzionamento non toccare il dispositivo con parti del corpo
bagnate o umide, in ogni caso si consiglia di interporre fra se e il piano
di appoggio un elemento isolante (ad esempio indossando scarpe con
suola in gomma).
Durante l’uso l’apparecchio deve essere tenuto a distanza di sicurezza da
qualsiasi oggetto e/o sostanza inammabile o potenzialmente esplosiva.
In caso di funzionamento anomalo o di anomalie durante il funzionamento
spegnere subito l’apparecchio, scollegarlo dall’alimentazione, vericare
le cause delle anomalie riscontrate eventualmente con l’aiuto di
personale
qualicato. Evitare in ogni caso di effettuare operazioni non previste dal
presente manuale d’uso (come smontarlo e/o modicarlo).
Ricordarsi di scollegare sempre il cavo di alimentazione del dispositivo
per periodi di inutilizzo prolungati, prima di riporlo e prima di effettuare
qualsiasi operazione di pulizia o manutenzione.
Conservare e utilizzare l’apparecchio esclusivamente in ambienti interni
o in ogni caso protetto da agenti atmosferici come pioggia, irraggiamento
diretto del sole o polvere.
L’apparecchio non è progettato per l’uso o la conservazione in esterno.
La pulizia e manutenzione del dispositivo NON deve essere effettuata da
bambini senza la supervisione di un adulto.
Prima di scollegare l’apparecchio spegnerlo mediante l’apposito
comando sul pannello di controllo.
Allorché si decida di non utilizzare più un apparecchio di questo tipo, si
raccomanda di rendere innocue quelle parti dell’apparecchio che possono
costituire un pericolo per le persone o di smaltirle compatibilmente con le

5
normative vigenti in merito.
NON alimentare il dispositivo senza prima averlo correttamente
assemblato seguendo le istruzioni del presente manuale.
Posizionare l’apparecchio ad una adeguata distanza da oggetti o pareti
circostanti in modo tale che il suo funzionamento non possa essere
causa di danni accidentali.
NON utilizzare il dispositivo in prossimità di fornelli a gas o amme libere
in generale.
NON utilizzare il dispositivo in prossimità di tende o tessuti liberi.
NON appendere il ventilatore ad una parete od al softto salvo tale
modalità di installazione non sia espressamente prevista e spiegata nel
presente manuale.
NON coprire in alcun modo il dispositivo durante il funzionamento.
NON inserire oggetti o parti del corpo nella griglia di protezione della
ventola.
NON lasciare l’apparecchio incustodito per lunghi periodi durante il
funzionamento.
NON rimanere esposti per lunghi periodi al usso d’aria generato dal
dispositivo in funzione, può provocare danni alla salute.
Se il ventilatore deve essere immagazzinato per lungo tempo e non usato
regolarmente, riporre il ventilatore nel suo imballo originale e metterlo in
un luogo secco ed asciutto. Quando lo si usa per la prima volta dopo un
lungo periodo di inutilizzo, controllare che il ventilatore sia pulito e che le
pale del motore girino liberamente (a dispositivo non alimentato) senza
alcun freno.

6
Informazioni tecniche IT
1. Griglia uscita dell’aria
2. Pannello comandi
3. Maniglia
4. Ruote (4 pcs.)
5. Filtro antipolvere
1
2
3
4
5
6
7
Istruzioni d’uso IT
Estrarre il prodotto dalla scatola ed inserire le ruote nei 4 fori situati sulla
parte inferiore del prodotto spingendole sino a ne corsa.
Riempire il serbatoio:
• Estrarre parzialmente il serbatoio (Attenzione: il serbatoio dell’acqua
non può essere estratto completamente) dopo aver ruotato la
manopola di apertura in posizione orizzontale.
• Versare acqua demineralizzata fredda e pulita nel serbatoio in modo
6. Tampone di raffreddamento
7. Manopola di apertura
8. Serbatoio
9. Cavo
10.Contenitori del ghiaccio (2 pcs.)
8
10
9

7
che il livello dell’acqua sia compreso tra l’indicatore “Min” di minimo e
“Max” di massimo.
• Per un maggior effetto rinfrescante inserire nel serbatoio dell’acqua
i contenitori del ghiaccio forniti di serie precedentemente riempiti di
acqua e posti nel congelatore no al completo congelamento.
• Richiudere il serbatoio.
ATTENZIONE!
• Prima di procedere al riempimento del serbatoio spegnere e scollegare
l’unità dalla presa di corrente.
• Non aggiungere sostanze chimiche, oli o altri additivi nel serbatoio:
esso deve essere riempito solo con acqua demineralizzata pulita
(precedentemente bollita) o acqua distillata.
• Utilizzare solo acqua fredda per riempire il serbatoio.
• Prestare attenzione al livello di acqua nel serbatoio: esso deve essere
compreso tra l’indicatore “Min” (minima quantità di acqua) e “Max”
(massima quantità di acqua).
Posizionare il ventilatore su una supercie piana e stabile ed inserire la
spina in una presa di corrente; per accendere il ventilatore e selezionare
la funzione desiderata premere i pulsanti sul pannello comandi.
Pannello comandi
A
Pulsanti
A. On/Off
B. Velocità minima
C. Velocità media
D. Velocità massima
E. Oscillazione
F. Raffrescamento
B C DE F

8
Premere il pulsante On/Off (A) per accendere il ventilatore. Selezionare
la velocità desiderata a scelta tra velocità minima, velocità media o
velocità massima premendo il pulsante relativo (B, C o D).
Premere il pulsante oscillazione (E) a ventilatore acceso per attivare
l’oscillazione automatica da sinistra a destra delle alette verticali. Premere
nuovamente il pulsante oscillazione (E) per disattivare questa funzione.
Premere il pulsante raffrescamento (F) a ventilatore acceso per attivare
la funzione di raffrescamento evaporativo ad acqua.
Questa modalità prevede l’utilizzo di acqua. Vericare sempre il livello
di acqua nel serbatoio prima di attivare questa funzione. I contenitori del
ghiaccio in dotazione consentono di incrementare l’effetto rinfrescante:
prima dell’utilizzo riempire i contenitori del ghiaccio con acqua e riporli
nel congelatore no a completo congelamento; successivamente inserirli
nel serbatoio dell’acqua facendo attenzione che il livello d’acqua non
superi la soglia massima. Per disattivare la funzione di raffrescamento
evaporativo ad acqua premere nuovamente il pulsante raffrescamaneto
(F). Quando la funzione di raffrescamento evaporativo ad acqua è
disattivata l’unità funziona come solo ventilatore.
Per spegnere il ventilatore premere il pulsante On/Off (A).
Manutenzione IT
Prima di effettuare la pulizia ordinaria, spegnere il ventilatore e scollegare
l’alimentazione di rete. Usare un panno morbido e asciutto per la pulizia
esterna.
NON immergere il ventilatore in acqua, nè spruzzarlo con liquidi di alcun
tipo.
NON utilizzare solventi o altri prodotti chimici per la pulizia.
Quando non utilizzato, dopo la pulizia conservare il ventilatore in un
luogo asciutto.
PULIZIA GIORNALIERA
Per ridurre la formazione di batteri ed il deposito di calcare, svuotare il
serbatoio ogni giorno dopo l’uso ed asciugarlo con un panno morbido e
pulito.
Pulizia del ltro antipolvere:
svitare la vite situata nella parte alta del ltro antipolvere e rimuovere il
ltro antipolvere tirandolo gentilmente verso l’esterno. Sciacquare il ltro
con acqua corrente. Una volta asciutto riposizionare il ltro nella sua
sede ed assicurarlo con la vite svitata precedentemente.

9
Pulizia del tampone di raffreddamento:
rimuovere il ltro antipolvere e successivamente il tampone di
raffreddamento; pulirlo con acqua corrente e reinserirlo nell’apposita
sede.
Attenzione: l’unità non deve mai essere messa in funzione senza ltro
antipolvere e senza tampone di raffreddamento
Pulizia del serbatoio:
estrarre parzialmente il serbatoio e pulirlo con un panno sofce ed
umido. Nel caso in cui ci fossero residui minerali sul fondo del serbatoio
utilizzare un detergente neutro per la pulizia che deve essere sempre
risciacquato con cura.
Attenzione: prima di riporre il ventilatore a ne stagione è consigliabile
svuotare il serbatoio completamente ed asciugarlo accuratamente.
Anche il ltro e il tampone di raffreddamento devono essere puliti e
completamente asciutti prima di riporre il ventilatore.

10
GARANZIA
Condizioni
La garanzia ha validità 24 mesi dalla data d’acquisto.
La presente garanzia è valida solo se viene correttamente compilata ed accompagnata
dallo scontrino scale che ne prova la data di acquisto.
L’apparecchio deve essere consegnato esclusivamente presso un nostro Centro
Assistenza autorizzato.
Per garanzia si intende la sostituzione o la riparazione dei componenti dell’apparecchio
che risultano difettosi all’origine per vizi di fabbricazione.
Viene comunque garantita l’assistenza (a pagamento) anche a prodotti fuori garanzia.
Il consumatore è titolare dei diritti applicabili dalla legislazione nazionale disciplinante la
vendita dei beni di consumo; questa garanzia lascia inpregiudicati tali diritti.
La Casa costruttrice declina ogni responsabilità per eventuali danni a persone, animali
o cose, conseguenti ad uso improprio dell’apparecchio e alla mancata osservanza delle
prescrizioni indicate nell’apposito libretto istruzioni.
Limitazioni
Ogni diritto di garanzia e ogni nostra responsabilità decadono se l’apparecchio è stato:
-Manomesso da parte di personale non autorizzato.
-Impiegato, conservato o trasportato in modo improprio.
Sono comunque escluse dalla garanzia le perdite di prestazioni estetiche o tali da non
compromettere la sostanza delle funzioni.
Se nonostante la cura nella selezione dei materiali e l’impegno nella realizzazione del
prodotto che Lei ha appena acquistato si dovessero riscontrare dei difetti, o qualora
avesse bisogno di informazioni, Vi consigliamo di telefonare al rivenditore di zona.
SMALTIMENTO
Informazione agli utenti: ai sensi dell’art. 26 del Decreto Legislativo 14 marzo 2014,
n. 49 “Attuazione della direttiva 2012/19/UE sui riuti di apparecchiature elettriche
ed elettroniche (RAEE)” Il simbolo del cassonetto barrato riportato sull’apparec-
chiatura o sulla sua confezione indica che il prodotto alla ne della propria vita
utile deve essere raccolto separatamente dagli altri riuti. L’utente dovrà,pertanto,
conferire l’apparecchiatura giunta a ne vita agli idonei centri comunali di raccolta
differenziata dei riuti elettrotecnici ed elettronici. In alternativa alla gestione autonoma
è possibile consegnare l’apparecchiatura che si desidera smaltire al rivenditore, al
momento dell’acquisto di una nuova apparecchiatura di tipo equivalente. Presso i
rivenditori di prodotti elettronici con supercie di vendita di almeno 400 m² è inoltre
possibile consegnare gratuitamente, senza obbligo di acquisto, i prodotti elettronici
da smaltire con dimensioni inferiori a 25 cm. L’adeguata raccolta differenziata per
l’avvio successivo dell’apparecchiatura dismessa al riciclaggio, al trattamento e allo
smaltimento ambientalmente compatibile contribuisce ad evitare possibili effetti
negativi sull’ambiente e sulla salute e favorisce il reimpiego e/o riciclo dei materiali
di cui è composta l’apparecchiatura.

11
GB
This appliance may be used by children
8yearsofageand olderandpeoplewith
reduced physical, sensory or mental
capacities or with a lack of experience
and knowledge if they are adequately
supervised or have been instructed on
the safe use of the appliance and are
aware of the related dangers.
Children must not play with the
appliance.
Cleaning and maintenance operations
must not be performed by children
without supervision.
If the power cable gets damaged, it
has to be replaced only at a service
centre approved by the manufacturer.
Unplug the appliance during lling and
cleaning.
ATTENTION : read this booklet carefully it contains important
instructions for a safe installation, use and maintenance.
Important instructions to be kept for future reference.
It is forbidden for the children to play with the device.
Warnings GB

12
This device must be used only for the purpose it was expressly designed;
any use not complying with the instructions contained in the manual
is considered inappropriate and dangerous. The manufacturer is not
responsible for possible damages caused by the inappropriate and/or
unreasonable use.
This device is NOT suitable to use it in an explosive environment (in the
presence of ammable substances such as gas, vapor, mist or dust, in
atmospheric conditions when, after ignition, the combustion is spread in
the air).
The packing materials (plastic bags, expanded polystyrene, etc.) must be
kept out of the reach of children or disabled persons since they represent
potential sources of danger.
The installation/assembly of the device will be made/ or according to the
indications of the manufacturer. A wrong procedure may cause damages
to persons, animals or objects, for which the manufacturer cannot be
considered responsible.
Place and use the device on a horizontal and stable surface.
Before use check the integrity of the device and power cable. In case you
are not sure contact a qualied person.
Before powering the device make sure the rating (voltage and frequency)
corresponds to the grid and the socket is suitable for the plug of the
device.
Make sure the power system is equipped with proper protection according
to the law in force.
DO NOT power the device using multiple sockets.
If possible, avoid the use of adapters and/or extension cables; if their
use is absolutely necessary, use only materials in compliance with the
current safety regulations and according to the electrical parameters of
the adapters.
The device must not be switched on using external timers and/or other
remote control devices which are not specied in this manual.
DO NOT use or store the device near heat sources (heaters, stoves etc.).
DO NOT dip the device in water or other liquids; in case the accidental fall
in the water DO NOT try to take it out, but rst of all unplug immediately
the power cable from the socket.
If you use the device for the rst time, make sure to remove any label or
protective sheet which blocks its proper functioning.
Plug and unplug the power cable with dry hands and hold it rmly.
Before plugging make sure the start button of the device is in the “OFF”
position (turned off).
Always unplug the power cable to avoid the overheating and avoid
stretching it (do not pull it, tug it or use it to drag the device to which is
connected).
Avoid placing the power cable on abrasive or sharp surfaces or in

13
positions where it can be damaged easily.
DO NOT obstruct totally nor partially the air vents or inserts objects
inside.
During the functioning do not touch the device with wet body parts, and
in any case it is recommended to have between you and the standing
surface, an isolating element (for example wearing shoes with rubber
soles).
During the use the device must be keep at a safety distance from any
object and/or ammable or potentially explosive substance.
In case of malfunction or anomalies during the functioning, switch off
the device immediately, turn off the power and check the cause of the
anomalies, if possible, with the support of a qualied person.
Avoid carrying out operations which are not specied in this manual
(such as disassembling and/or altering).
Always remember to unplug the power cable of the device if it is not used
for a long period, before storing, cleaning or performing any maintenance
operation.
Store and use the device only indoor or in any case protected from
weathering such as rain, direct radiation of the sun and dust. The device
is not design for the external use or storage.
The cleaning and maintenance of the device MUST NOT be done by
children without the supervision of an adult.
Before unplugging the device, switch it off, using the proper command
on the control panel.
DO NOT hang the fan on the wall or ceiling unless this type of installation
is provided and explained in this manual.
Place the device at a proper distance from the objects or surrounding
walls making sure that its functioning will not cause accidental damages.
DO NOT use the device near gas stoves or open ames in general.
DO NOT use the device near curtains or textiles.
DO NOT hang the fan on the wall or ceiling unless this type of installation
is provided and explained in this manual.
DO NOT cover the device during functioning.
DO NOT insert objects or body parts inside the protection grille of the fan.
DO NOT leave the device unsupervised for a long period during
functioning.
DO NOT expose yourself for a long period to the air ow generated by the
device because it can cause damage to the health.
If the fan must be stored for a long period and is not used regularly, place
the fan in its original packaging in a dry place. When you use it for the
rst time after a long period of inactivity, make sure the fan is clean and
the motor blades turn feely (with the device not powered) without any
restraint.

14
Take out the product from the giftbox and insert the wheels by pushing
them inside the 4 holes placed on the bottom of the product.
Fill the water tank:
• Rotate the knob in horizontal position and pull out the water tank
(Attention: the water tank cannot be opened completely).
• Fill the water tank with cold and clean demineralized water. Make
sure that water level is between “Min” minimum level and “Max”
Instructions for use GB
Technical informations GB
1. Air outlet
2. Control panel
3. Handle
4. Wheels (4 pcs.)
5. Anti-dust lter
6. Cooling pad
7. Knob
8. Water tank
9. Cable
10.Ice box (2 pcs.)
1
2
3
4
5
6
7
8
10
9

15
maximum level.
• To increase the cool effect insert the ice box in the water tank. Before
use ice box, they must be lled by water and put in the refrigerator until
they are completely frozen.
• Close tha water tank.
ATTENTION!
• Make sure the product is unplugged from the mains before lling or
refelling the water tank.
• Only use water in the water tank. Do not add any chemicals, oils or
other additives.
• Only use cold demineralized water in the water tank (previously
boiled) or distilled water.
• Make sure the water level in the water tank is between minimum level
(indicated by “Min”) and maximum level (indicated by “Max”).
Place the unit on a rm level surface and plug it into a socket. To turn the
fan On and select the desired function push the buttons on the control
panel.
To turn the unit on, push the On/Off button (A).
Select the desired speed: minimum speed, medium speed or maximum
speed just pushing the related button (B, C or D).
Press Swing button (E) when the unit is operating to activate the automatic
left/right oscillation of vertical louvres. Press again Swing button (E) to
deactivate the automatic swing.
Press Cooler button (F) when the unit is operating to activate the
evaporative cooling function.
Control panel Buttons
A. On/Off
B. Minimum speed
C. Medium speed
D. Maximum speed
E. Swing
F. Cooler
A B C DE F

16
This function use water so make sure about water level in the water tank
before turn on this function. The ice boxes provided increase the cool
effect: before use, ll them with water and put in the refrigerator until they
are completely frozen. After that insert the frozen ice boxes in the water
tank making sure that water level is under maximum level allowed. To
deactivate the evaporative cooling function press again the Cooler button
(F). If the evaporative cooling function is deactivated, the unit work as a
fan.
To turn the unit off, press the On/Off button (A).
Maintenance GB
Before carrying out routine cleaning, switch off the fan and disconnect
mains power. For external cleaning use a soft and dry cloth.
DO NOT dip the device in water, or splash it with any other liquids.
DO NOT use solvents or any other chemical products for cleaning it.
When you do not use it, after cleaning it, store the fan in a dry place.
DAILY CLEANING
To reduce bacteria and scale residues, empty the water tank every day
after use and dry it with a soft and clean cloth.
Cleaning the anti-dust lter:
unscrew the screw placed on the top of anti-dust lter and remove it from
the appliance by pulling it out. Clean it with water and replace on the
appliance when dry. Fix the anti-dust lter with its screw.
Cleaning the cooling pad:
Remove anti-dust lter and then the cooling pad. Clean the cooling pad
under the water and put it inside the unit.
Attention: the cooling pad and the anti-dust lter must be replaced in the
appliance before turn it on.
Cleaning of the water tank:
Pull out the water tank (Attention: the water tank cannot be opened
completely) and clean it with a soft damp cloth. If the water tank is
particularly dirty use a mild soap that must be rinsed carefully.
On the bottom of the water tank there is a small plastic stopper that
Attention: before store the fan at the end of the season is necessary
completely empty the water tank and dry it. Clean even the anti-dust lter
and cooling pad and make sure they are completely dry before replace
them in the unit.

17
GUARANTEE
Terms and Conditions
The guarantee is valid for 24 months.
This guarantee applies only if it has been duly lled in and is submitted with the
receipt showing the date of purchase.
The guarantee covers the replacement or repair of parts making up the appliance
which were faulty at source due to manufacturing faults.
After the guarantee has expired, the appliance will be repaired against payment.
The manufacturer declines any responsibility for damage to persons, animals
or property due to misuse of the appliance and failure to observe the directions
contained in the instructions.
Limits
All rights under this guarantee and any responsibility on our part will be voided if
the appliance has been:
- mishandled by unauthorized persons
- improperly used, stored or transported.
The guarantee does not cover damage to the outward appearance or any other that
does not prevent regular operation.
If any faults should be found despite the care taken in selecting the materials and
in creating the product, or if any information or advice are required, please contact
your local dealer.
USER INFORMATION
“Implementation of Directive 2012/19/EU on Waste Electrical and Electronic
Equipment (WEEE)”, pertaining to reduced use of hazardous substances in
electrical and electronic equipment, as well as to waste disposal”.
The symbol of the crossed-out wheelie bin on the equipment or on its packaging
indicates that the product must be disposed of separately from other waste at the
end of its service life.
The user must therefore take the dismissed equipment to suitable separate
collection centres for electrical and electronic waste, or return it to the dealer in
case they purchase a new device of equivalent type, at a one-to-one-ratio.
Suitable segregated collection of the equipment for subsequent recycling, treatment
or environmentally-friendly disposal helps prevent damage to the environment and
to human health, and encourages the re-use and/or recycling of the materials that
make up the equipment.
Abusive disposal of the product by the user shall result in the application of
administrative nes in accordance with the laws in force.

18
DE
Dieses Gerät kann sowohl von
Kindern ab 8 Jahren alsauch von
körperlich, sensorisch oder geistig
eingeschränkten Personen bzw. Von
Personen ohne Erfahrung oder ohne
Wissen genutzt werden, wenn sie von
einer geschulten Person beaufsichtigt
werden oder wenn sie Anweisungen
zum sicheren Einsatz des Geräts
erhalten haben und wenn sie die
entsprechenden gefahren verstanden
haben.
Kinder dürfen mit dem gerät nicht
spielen.
Reinigungs- und Wartungsarbeiten
dürfen nur von Kindern durchgeführt
werden, wenn diese älter als 8 Jahre
sind und während der Arbeiten
beaufsichtigt werden.
Sollte das Netzkabel beschädigt sein,
so darf es nur in vom Hersteller dazu

19
ermächtigten Service-Centern bzw.
Service-Werkstätten ausgetauscht
werden.
Das Gerät beim Befüllen und bei
Reinigungen ausschalten und vom
Stromnetz trennen.
Garantiebescheinigung, skalische Quittung und Bedienungsanleitung
für jede spätere Konsultation bitte aufbewahren.
Nach Entfernen der Verpackung vergewissere man sich der Integrität
des Gerätes und sollte man bei dieser Überprüfung sichtbare
Beschädigungen festestellen, das Gerät nicht benutzen und sich direkt
an qualiziertes Fachpersonal wenden.
Keinerlei Verpackungsteile für Kinder zugänglich zurücklassen, das
Gerät auch nicht als ein Spielzeug verwenden: es ist ein Elektrogerät
und als solches zu behandeln.
Bevor man das Gerät an die Netzspannung anschließt, stelle man sicher
dass die an der Steckdose liegende Spannung auch derjenigen des
Typenschildes des Gerätes entspricht.
Die Sicherheit dieses Gerätes ist nur dann gewährleistet, wenn das
Gerät auch an eine leistungsfähige Erdungsanlage angeschlossen ist.
Sollten Stecker und Steckdose nicht kompatibel sein, so lasse man
die Steckdose durch eine passende Steckdose ersetzen. Diese Arbeit
ist von einem qualizierten Fachmann durchzuführen. Keine Adapter
oder Verlängerungsschnuren verwenden die nicht den Forderungen
der gegenwärtig geltenden Sicherheitsnormen genügen oder die die
Stromgrenzwerte überschreiten.
Trennen Sie das Gerät vom Stromnetz, wenn es nicht verwendet wird.
Am Netzkabel oder am Gerät selbst nicht ziehen um Stecker aus der
Steckdose herauszuziehen.
Der Gebrauch irgendeines Elektrogerätes erfordert immer die Beachtung
einiger grundlegenden Regeln und zwar insbesondere:
- Man darf niemals das Gerät mit nassen oder feuchten Händen berühren.
- Das Gerät niemals barfuß benutzen.
Anmerkungen DE

20
- Das Gerät nicht den Witterungseinüssen ausgesetzt lassen (Regen,
Sonnenstrahlung).
- Gerät nicht Schlag-oder Stoßbeanspruchungen aussetzen. Es ist zu
empfehlen, das Netzkabel für seine ganze Länge abzuwickeln um
somit eventuelle Überhitzungen zu vermeiden.
Sollte man sich dafür entscheiden diesen Gerätetyp nicht mehr zu
benutzen, so ist es angebracht das Gerät unbenutzbar zu machen durch
Abschneiden des Netzkabels, natürlich nach dessen Abtrennung von der
Steckdose.
Bei Erscheinen einer Störung bzw. einem nicht einwandfreien Betrieb
des Gerätes hat man sofort den Stecker zu ziehen, keinerlei Eingriff am
Gerät vorzunehmen und sich an eine zugelassene Service-Werkstatt zu
wenden.
Das Gerät wurde für die Verwendung in häuslicher Umgebung entworfen
und gebaut, gemäß den Angaben in der Anleitung; deshalb gilt jede
andere Verwendung als unsachgemäß und daher gefährlich.
Ausschließlich in trockener Umgebung im Innenbereich benutzen! Vor
Feuchtigkeit schützen!
Aus Sicherheitsgründen darf das Gerät nicht geöffnet werden.
Das Gerät darf nicht in Räumen benutzt werden, wo sich entzündliche
Dämpfe oder explosive Pulvern freisetzen könnten. Nicht in entzündlicher
oder explosiver Umgebung einsetzen!
Bei außerordentlichen Erscheinungen (z.B. ungewöhnliche Geräusche
aus dem Gerät oder Brandgeruch) ist das Gerät sofort auszuschalten
und vom Netz zu trennen.
Die Lufteintritte WEDER TEILWEISE NOCH VOLLKOMMEN abdecken.
Keine Gegenstände hineinstecken.
Das Gerät NICHT in der Nähe von Gasherden oder anderen offenen
Flammen verwenden.
Sich NICHT über längere Zeit dem Luftstrom aussetzen, der vom Gerät
erzeugt wird, denn dies kann der Gesundheit schaden.
Die Installation/der Zusammenbau der Vorrichtung muss entsprechend
den Anleitungen des Herstellers erfolgen. Ein falsches Verfahren kann
Personen, Tiere oder Gegenstände beschädigen, für die der Hersteller
nicht zur Verantwortung gezogen werden kann.
Falls das Gerät nach längerer Zeit wieder benutzt wird, kontrollieren,
dass der Ventilator sauber ist und sich die Rotorblätter frei drehen
können (nicht unter Stromzufuhr) und nicht bremsen.
Während des Gebrauches ist das Gerät auf einer ebenen Fläche zu
halten.
Table of contents
Languages:
Other ARDES Air Conditioner manuals

ARDES
ARDES AR5AMR08 User manual

ARDES
ARDES AR5R05 User manual

ARDES
ARDES AR5R003 User manual

ARDES
ARDES AR5R14 User manual

ARDES
ARDES AR5R10 User manual

ARDES
ARDES AR5R11 User manual

ARDES
ARDES AR5AMR08 User manual

ARDES
ARDES AR5R10 User manual

ARDES
ARDES AR5R05T User manual

ARDES
ARDES Eolo Mini 5R05 User manual
Popular Air Conditioner manuals by other brands

Midea
Midea PD series manual

Trane
Trane Packaged TerminalAir Conditioners & Heat... Installation operation & maintenance

Kenmore
Kenmore 405.84086 Use & care manual

GREE ELECTRIC
GREE ELECTRIC GWH09TA-S3DNA1C Service manual

Arcoaire
Arcoaire R4A3 installation instructions

Fortress Technologies
Fortress Technologies FWAC08M16 user manual