AREBOS AR-HE-HRW3T Product information sheet

Original User Manual –AREBOS Hydraulic Trolley Jack 3 Ton
1
Hydraulic Trolley Jack 3 T
AR-HE-HRW3T
Please follow all security measures in this user´s manual to ensure a secure use.
Thank you for trusting in AREBOS.

Original User Manual –AREBOS Hydraulic Trolley Jack 3 Ton
2
List of contents
1.Safety instructions.......................... 3
1.1 Explanation of the symbols .............................................................................................. 3
1.2 General safety instructions............................................................................................... 4
2.Set Up............................................. 5
2.1 Overview of product......................................................................................................... 5
2.2 Control before use............................................................................................................ 5
2.3 Attaching the Handle........................................................................................................ 5
3. Operation ...................................... 6
3.1 Bleeding ............................................................................................................................ 6
3.2 Adding Hydraulic Fluid...................................................................................................... 6
3.3 Lifting and Lowering .................................................................................................... 6
3.3.1 Lifting.......................................................................................................................... 7
3.3.2 Lowering..................................................................................................................... 7
4.Explosion view................................ 8
5.Maintenance of the jack............... 10
6.Troubleshooting ........................... 10
7. Specifications............................... 11
8. Environmentally friendly disposal 11
8.1 Disposal and packaging................................................................................................... 11
8.2 Disposal of old equipment.............................................................................................. 11
EC Declaration of Conformity .......... 12

Original User Manual –AREBOS Hydraulic Trolley Jack 3 Ton
3
Thank you for purchasing our product. Please read the operating instructions carefully before using
the product for the first time. If you give the product to a third party, this manual must be handed
over with it. Keep the instruction manual for future reference. The drawings in this manual may
not match the physical objects. Please refer to the physical objects.
1.Safety instructions
1.1 Explanation of the symbols
Warning! Read the safety instructions carefully. Failure to follow the safety
precautions could result in serious injury or damage. Keep the operating
instructions in a safe place.
Be careful when using this product.
Warning! Danger of crushing the hands.
This product has been tested and certified by TÜV Rheinland.
The symbol "GS" stands for tested safety. Products marked with
this symbol comply with the requirements of the German
Product Safety Act (ProdSG).
By means of a CE marking, it can be recognized that a product complies with the
legal provisions of European legal standards and therefore may be traded within
the European Community.

Original User Manual –AREBOS Hydraulic Trolley Jack 3 Ton
4
1.2 General safety instructions
•This jack is designed for lifting objects only and shall be supported by an adequate
aid, such as a stand.
•Make sure that the lifted object is firmly fixed to the jack.
•Do not use the jack while persons are in or leaning against the vehicle.
•Do not exceed the permissible load.
•Do not use any extensions other than those attached to the jack.
•Wear safety goggles and heavy-duty work gloves during use.
•Use the jack only on a firm surface that can support the load.
•Make sure that the jack is central and stable with its support saddle under the object
and the lifting point.
•You must ensure that the safety instructions and labels are always clearly visible and
not soiled.
•Read the supplied instructions carefully before use.
•Failure to follow these instructions can lead to damage to the lift and/or the vehicle
and/or a person.
•This manual should be kept in a safe place so that it can be used and/or maintained
at a later date.
•This jack is filled with high quality hydraulic oil. Use suitable hydraulic oil at extremely
low temperatures. Use only high-quality oil. Avoid mixing different oils. Never use
brake fluid, alcohol, cleaning agents, turbine oil, gear oil, engine oil or glycerin or
contaminated oils. The latter can cause damage to the jack or impair its function.
•Never adjust the adjusting screws on the hydraulic unit.
•The operator should watch the lifting device and the load during all movements.
•It is not allowed to work under the raised load until it is secured by suitable means.
•This jack is for lifting purposes only and it is not designed for the lifting of person.
•The hydraulic jack could not be operated in potentially explosive atmosphere and
severe conditions, e.g. extreme climates, freezer application and strong magnetic
fields.
•The hydraulic jack could not be operated in potentially explosive atmospheres, e.g.
mines.
•Be careful of handling of loads, the nature of which could lead to dangerous
situation, e.g. molten metal, acids, radiating materials, especially brittle loads.
•The A-weighted emission sound pressure level of this product is less than 70dB(A).
•Maybe residual risks unspecified in the label could be remained; always wear PPE
during the operation.
•The product is not allowed to operate on sea ships.
•Do not use for aircraft purposes.
•The jack is designed to work at rated load in a temperature range of -20°C to +50°C.
•No modifications shall be carried out which adversely affect the compliance of the
jack with standard EN 1494 or the essential requirements of the Machinery Directive
2006/42/EC.
•IMPORTANT! Before first use: Check hydraulic fluid level and fill to 1/4″below the
fill port as needed. Thoroughly test the Jack for proper operation. If it does not work
properly, bleed air from its hydraulic system.

Original User Manual –AREBOS Hydraulic Trolley Jack 3 Ton
5
2.Set Up
2.1 Overview of product
A. Handle Socket
B. Foot pedal
C. Lifting arm
D. Saddle
E. Front wheel
F. Rear wheel
G. Handle (Upper + Lower part)
H. Oil filler plug
I. Knurled Knob
J. Safety overload valve
2.2 Control before use
•The jack must be inspected for any oil leaks and/or loose, damaged or missing parts before
each use.
•The owner/user must always ensure that repairs can only carried out by a suitable specialist
or authorized dealer.
2.3 Attaching the Handle
•Assemble handle (G) by sliding the two parts together and rotating until the locking pin clicks
into position.
•Partially unscrew knurled knob until handle (G) slides fully into socket (A).
•Tighten the knurled knob (I) to lock handle in place.
Before first use
•Before using the jack, purge hydraulic circuit in order to eliminate any possible air
in the system by turning the handle anti-clockwise to open the release valve, and
pumping 15 to 20 times. At the end of the last downward stroke shut the valve off
again by turning the handle clockwise.
•Place a few drops of hydraulic jack oil on pump piston and pump handle several
times to distribute oil. Thoroughly lubricate moving parts.

Original User Manual –AREBOS Hydraulic Trolley Jack 3 Ton
6
3. Operation
3.1 Bleeding
BEFORE EACH USE OR IF JACK PERFORMANCE DECREASES,
check for excessive air and proper hydraulic fluid level in Jack. If Jack appears not to be working
properly, it may be necessary to purge its hydraulic system of excessive air as follows:
1) Remove the oil Filler Plug (H).
2) Twist the Handle counterclockwise to open the Valve.
3) Check fluid level and, if necessary, top off according to chapter 3.2 below.
4) Turn the Handle clockwise to close the valve, then pump the Handle quickly several times.
5) Refit Fill Plug.
IMPORTANT!
After bleeding the Jack, test the Jack for proper operation prior to its actual use.
6) If the Jack does not appear to be working properly after bleeding, do not use it until repaired
by a qualified service technician.
3.2 Adding Hydraulic Fluid
1) To check the oil level, fully lower the jack and remove filler plug.
2) Add good quality jack oil slowly until the fluid reaches 1/4 below the top of the Fill Port, if
necessary.
Note
Use hydraulic jack oil only.
Do not touch the Handle when adding hydraulic fluid.
3.3 Lifting and Lowering

Original User Manual –AREBOS Hydraulic Trolley Jack 3 Ton
7
3.3.1 Lifting
1) Park vehicle on a flat, level, solid, surface safely away from oncoming traffic. Turn off the
vehicle’s engine. Place the vehicle’s transmission in “PARK” (if automatic) or in its lowest gear
(if manual). Set the vehicle’s emergency brake. Then chock the wheels that are not being
lifted (Fig.1).
2) Slowly twist the Handle counterclockwise to lower the Jack. Once the Jack is fully lowered,
twist the Handle firmly clockwise.
3) Carefully position the Jack’s Saddle under the vehicle manufacturer’s recommended lifting
point. (See vehicle manufacturer’s owner’s manual for location of frame lifting point.)
4) Pump the Handle until the top of the Saddle (D) has nearly reached the vehicle’s lifting point.
Position the Saddle directly under the vehicle’s lifting point.
5) To lift the vehicle, pump the Handle, or use foot-pedal (B). Use smooth, full strokes (Fig.2).
6) Select matching jack stands of appropriate capacity. Set the jack stands to the same height
according to the manufacturer’s instructions, making sure they lock securely into position.
7) Position the jack stands’ saddles under the vehicle manufacturer’s recommended support
points (Fig.3).
IMPORTANT!
Ensure that the vehicle support points are fully seated in the saddles of both jack stands.
Use a matched pair of jack stands per vehicle to support one end only.
8) Slowly twist the Handle counterclockwise to lower the vehicle onto the jack stands’ saddles
(Fig.4).
9) Once the vehicle is fully seated on the jack stands, continue slowly lowering the Jack until it is
completely lowered.
3.3.2 Lowering
1) Carefully remove all tools, parts, etc. from under the vehicle.
2) Position the Jack’s Saddle under the lifting point. Turn the Release Knob firmly clockwise and
raise vehicle high enough to clear the jack stands (Fig.2).
3) If using axle stands, raise the jack high enough for the stands to be easily removed. Carefully
remove the jack stands.
4) Slowly turn the Release Knob counterclockwise to lower the vehicle onto the ground (Fig.4).
Lower carefully, avoid any sudden changes in descent rate which would shock load the
hydraulic system.
5) Lower the Jack completely. Store the Jack indoors out of children’s reach.
WARNING!
Ensure there are no persons or obstacles beneath the vehicle, or in the path of its
descent.

Original User Manual –AREBOS Hydraulic Trolley Jack 3 Ton
8
4.Explosion view

Original User Manual –AREBOS Hydraulic Trolley Jack 3 Ton
9
Part
No.
description
Part
No.
description
Part
No.
description
Part
No.
description
1
saddle
23
left side plate
assembly
45
washer
67
screw
2
lifting arm
assembly
24
right side plate
assembly
46
throttle valve
68
steel ball
3
radius link
25
frame tie rod
47
spring
69
reservoir
4
lock washer
26
lock washer
48
release valve
assembly
70
filter
5
lock washer
27
nut
49
o - ring
71
handle sleeve
6
core tube
assembly
28
bolt
50
hex bolt
72
pin
7
returning
spring
29
lock washer
51
washer
73
gear
8
retainer
30
bearings
52
washer
74
release valve
lever
9
front wheel
31
bear caster
assembly
53
base
75
hex thin nut
10
front axle
32
nut
54
screw
76
washer
11
washer
33
ram plunger
55
back-up washer
77
retainer
12
snap ring
34
bushing cover
56
o - ring
78
bolt
13
frame tie rod
35
back-up washer
57
steel ball
79
handle-I
14
lock washer
36
u-cup seal
58
steel ball
80
handle lock
button
15
nut
37
snap ring
59
guard screw
81
handle -II
16
radius link stud
38
top nut
60
safety valve
screw
82
handle grip
17
lock washer
39
o - ring
61
safety valve
spring
83
handle lock
block
18
nut
40
wedge ring
62
valve
84
pedal weld
assembly
19
handle sleeve
bolt -left
41
cylinder
63
steel ball
85
pedal
20
lock washer
42
back-up ring
64
pump piston
86
blot
21
handle sleeve
bolt -right
43
o - ring
65
back-up washer
87
saddle pad
22
returning
spring
44
oil seal
66
o - ring
88
saddle pad

Original User Manual –AREBOS Hydraulic Trolley Jack 3 Ton
10
5. Maintenance of the jack
•If you want to stow the jack, lower the jack to the lowest position and close the drain valve.
•Keep the jack clean. Lubricants should be applied to all moving parts every three months.
•Check the oil level regularly.
•Use good quality hydraulic jack oil only.
•Periodically check the pump piston and the ram for signs of corrosion.
•Attention:The life of the product of 5 years should not be exceeded due to signs of
wear in order to ensure safe use of the product. This service life is based on proper
and appropriate use.
6.Troubleshooting
WARNING: DO NOT USE A DAMAGED OR MALFUNCTIONING JACK.
PROBLEM
POSSIBLE CAUSE
REMEDY
Jack will not lift the
load
1) Overloaded
2) Oil level low
3) Release valve not
correctly closed
4) Air in system
5) Piston rod not
functioning
1) Be sure to use jack with adequate
capacity
2) Top up oil level
3) Check and close release valve
4) Open release valve and pump the handle a few
times. Close valve and re-try
5) Clean and replace oil
Jack does not lift high
enough or feels
“spongy”
1) Oil level too high or too
low
2) Air in system
3) Release valve not closed
1) Fill or remove excess oil
2) Open release valve and pump the handle a few
times. Close valve and re-try
3) Check and close release valve
Jack lifts poorly
1) Pump valve
malfunctioning
2) Oil is dirty
3) Air in the system
1) clean valves
2) Replace oil
3)Open release valve and pump the handle a few
times. Close valve and re-try
Jack lifts but will not
hold load
1) Release valve partially
open
2) Dirt on valve seats
3) Air in system
1) Check and close release valve
2) Lower jack, close release valve. Place foot on
front wheel and pull up lifting arm to its full
height by hand. Open the release valve to
lower arm
3) Open release valve and pump the handle a few
times. Close valve and re-try.
Jack will not lower
completely
1) Unit requires lubrication
2) Piston rod bent or
damaged
3) Air in system
4) Release valve partially
closed
5) Jack spring damaged or
unhooked.
1) Oil all external moving parts
2) Replace rod if broken
3) Open release valve and pump the handle a few
times. Close valve and re-try
4) Check and fully open release valve
5) Replace spring if broken
Jack does not lower
at all
1) Release valve closed
1) Check and fully open release valve

Original User Manual –AREBOS Hydraulic Trolley Jack 3 Ton
11
7. Specifications
Model
AR-HE- RWH3F
Max. Capacity of load
3000 KG
Min. Height of Saddle
130 mm
Max. Height of Saddle
508 mm
Diameter of saddle
110 mm
Front wheel diameter
88 mm
Rear wheel diameter
58 mm
Material
Steel
Length of handle
104 cm
Net weight
33.45 kg
Delivery Content
1x Trolley jack (with handle / wheels)
1x Foot pedal
2x Rubber pad
1x User Manual
8. Environmentally friendly disposal
Warning Danger of suffocation! Packaging material is dangerous for children. Never let children play
with packaging material.
8.1 Disposal and packaging
•The packaging of your unit consists of materials that are necessary to guarantee effective
protection during transport. These materials are fully recyclable and therefore reduce the
environmental impact. Dispose of the packaging in a bin for recyclable materials.
8.2 Disposal of old equipment
•Old appliances must be disposed of in accordance with the guidelines and regulations of the
local waste disposal authority. Check with your local administration for the address of the
nearest recycling centre and deliver your appliance there.
Our customer service number: Tel. [phone]
Fax: [phone] / E-Mail: in[email protected]
Office address: Canbolat Vertriebs GmbH • Gneisenaustraße 10-11 • 97074 Würzburg
Return address can be found in the imprint: https://www.arebos.de/impressum/

Original User Manual –AREBOS Hydraulic Trolley Jack 3 Ton
12
EC Declaration of Conformity
We, the
Canbolat Vertriebs GmbH, Gneisenaustraße 10-11, 97074 Würzburg, Germany
hereby declare that the equipment described below, by virtue of its design and construction and in
the versions placed on the market by us, complies with the relevant essential health and safety
requirements of the EU directives.
Product name: Hydraulic Trolley Jack 3 T
Model number: AR-HE- RWH3F
Article number: 4252023112260
Should the appliance be modified without our consent, this declaration of conformity will lose its
validity.
Tested according to EU-Norm / Directives:
EN1494:2000+A1
AfPS GS 2019:01 PAK
Machinery Directive: 2006/42/EC
Date/Signature Manufacturer/Place: Würzburg, January 4, 2023
Signature:
Dipl.-Inform. (Univ.) Korhan Canbolat, Managing Director
Representative of these instructions for use/technical data:
Dipl.-Inform. (Univ.) Korhan Canbolat, Managing Director
Office address:
Canbolat Vertriebs GmbH
Gneisenaustraße 10-11
D-97074 Würzburg
Return address can be found in the imprint: https://www.arebos.de/impressum/
VAT identification number: DE 263752326
Court of the Commercial Register is Würzburg, HRB 10082
WEEE Reg.-No. DE 61617071