Arecont Vision AV2225PMIR User manual





Installation Manual
AV2225PMIR
AV2225PMIR-A
AV2226PMIR
AV3225PMIR
AV3226PMIR
AV3226PMIR-A
AV5225PMIR
AV5225PMIR-A
AV10225PMIR



Arecont Vision MegaView®2 Installation Manual
Page | 2 [email protected]






MegaView®2 Installation

Contents
Package Contents...................................................................................................................................................3
Warranty Information..............................................................................................................................................4
Install MegaView®2 Camera.................................................................................................................................5
Replacing the IR LED board:...............................................................................................................................10
Camera Software Installation..............................................................................................................................11
Electrical Box Adapter (SV-EBA) Installation Instructions (Sold Separately)..............................................13
Pole Mount Adapter (MD-PMA) Installation Instructions (Sold Separately).................................................14
Corner Mount Adapter (MD-CRMA) Installation Instructions (Sold Separately).........................................15
LED Indicators (Camera Signal).........................................................................................................................16
Support...................................................................................................................................................................17
Mounting Template...............................................................................................................................................18


Page | 3 suppo
Pack
Mega
V
A.
A
B. J
u
C.
M
D.
M
E.
C
F.
S
G.
P
H.
R
I.
P
rt@arecont
v
age C
o
V
iew
®
2
C
A
recont Visi
o
u
nction box
M
ounting Te
m
M
ounting Te
m
C
D with AV1
0
S
ecurity L-k
e
P
ack of four
(
R
ubber plug
P
ack of four
(
v
ision.com
o
ntents
C
amera P
o
n MegaVie
w
adapte
r
m
plate for J
u
m
plate for
M
0
0 software
e
y
(
4) wood sc
r
(
4) machine
Image 1
A
ackage:
w
®
2 Camer
a
u
nction box
M
egaView
®
2
and user m
a
r
ews and fo
u
screws, #8
-
D
A
recon
t
a
adapte
r
2
Camera
a
nuals (lice
n
u
r (4) dry w
a
-
32, ½” Phill
i
E
t
Vision M
e
n
se key req
u
a
ll anchors
i
ps Pan He
a
B
F
G
e
gaView
®
u
ired for rec
o
a
d
C
G
H
2 Installat
i
o
rding)
I
i
on Manu
a
a
l

Arecont Vision MegaView®2 Installation Manual
Page | 4 [email protected]
Warranty Information
3 Year Limited Warranty
ARECONT VISION warrants to Purchaser (and only Purchaser) (the “Limited Warranty”), that: (a) each Product shall be free
from material defects in material and workmanship for a period of thirty-six (36) months from the date of shipment (the
“Warranty Period”); (b) during the Warranty Period, the Products will materially conform with the specification in the applicable
documentation; (c) all licensed programs accompanying the Product (the “Licensed Programs”) will materially conform with
applicable specifications. Notwithstanding the preceding provisions, ARECONT VISION shall have no obligation or
responsibility with respect to any Product that (i) has been modified or altered without ARECONT VISION’s written
authorization; (ii) has not been used in accordance with applicable documentation; (iii) has been subjected to unusual stress,
neglect, misuse, abuse, improper storage, testing or connection; or unauthorized repair; or (iv) is no longer covered under the
Warranty Period. ARECONT VISION MAKE NO WARRANTIES OR CONDITIONS, EXPRESS, IMPLIED, STATUTORY OR
OTHERWISE, OTHER THAN THE EXPRESS LIMITED WARRANTIES MADE BY ARECONT VISION ABOVE, AND
ARECONT VISION HEREBY SPECIFICALLY DISCLAIMS ALL OTHER EXPRESS, STATUTORY AND IMPLIED
WARRANTIES AND CONDITIONS, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, NON-INFRINGEMENT AND THE IMPLIED CONDITION OF SATISFACTORY QUALITY. ALL
LICENSED PROGRAMS ARE LICENSED ON AN “AS IS” BASIS WITHOUT WARRANTY. ARECONT VISION DOES NOT
WARRANT THAT (I) THE OPERATION OF THE PRODUCTS OR PARTS WILL BE UNINTERRUPTED OR ERROR FREE;
(II) THE PRODUCTS OR PARTS AND DOCUMENTATION WILL MEET THE END USERS’ REQUIREMENTS; (III) THE
PRODUCTS OR PARTS WILL OPERATE IN COMBINATIONS AND CONFIGURATIONS SELECTED BY THE END USER;
OTHER THAN COMBINATIONS AND CONFIGURATIONS WITH PARTS OR OTHER PRODUCTS AUTHORIZED BY
ARECONT VISION OR (IV) THAT ALL LICENSED PROGRAM ERRORS WILL BE CORRECTED.
For RMA and Advance Replacement information visit ArecontVision.com

Page | 5 suppo
Insta
Mount
1. Rem
o
box.
2. Use
t
prep
a
box
a
3.
A
tta
c
(Ima
g
scre
w
the
m
4. Rem
o
adap
Junc
t
NOT
E
to m
a
con
d
5. Run
E
nece
s
A
da
p
cabl
e
6. Add
p
the b
insta
l
sho
w
7. Orga
Meg
a
A
da
p
as s
h
NOTE 1
:
installati
o
rt@arecont
v
ll Meg
a
ing the
C
o
ve camera
t
he mountin
g
a
re the mou
n
a
dapter inst
a
c
h provided
J
g
e 1-B) to t
h
w
s or any o
p
m
ounting su
r
o
ve the con
d
ter and con
n
t
ion Box Ad
a
E
: Use silic
o
a
ke sure no
uit pipe and
E
thernet ca
b
s
sary) throu
p
ter and con
n
e
as shown i
p
rovided ru
b
racket to en
l
lation for o
u
w
n in Image
nize pigtail
c
a
View
®
2 ca
m
p
ter using pr
o
h
own in Ima
g
:
Water dam
o
n is not co
v
v
ision.com
a
View®
2
C
amera:
and hardw
a
g
template (
n
ting provisi
a
llation.
J
unction Bo
x
h
e wall usin
g
p
tional hard
w
r
face.
d
uit plug on
n
ect ¾” NP
T
a
pter shown
o
n or water
p
water leaka
g
junction bo
x
b
le and oth
e
gh the Junc
n
ect to Meg
a
n Image 8.
b
be
r
plug (I
m
sure a wate
u
tdoor appli
c
3.
c
able and a
t
m
era to Jun
o
vided scre
w
g
e 3-1 and
I
age from i
m
v
ered by the
2
Cam
e
a
re from the
Image 1-C)
,
ons for
j
un
c
x
Adapter
g
drywall
w
are suitabl
e
Junction bo
T
conduit pi
p
in Image 2
.
p
ipe seal ta
p
g
e between
x
adapter.
er
cables (if
tion Box
a
view
®
2 pi
g
m
age1-H) o
n
r tight
c
ations as
t
tach
ction Box
w
s (Image
1
I
mage 4.
m
proper
warranty
!
A
recon
t
e
ra
,
to
c
tion
e
for
x
p
e to
.
p
e
g
tail
n
1
-I)
N
w
g
t
Vision M
e
N
OTE 2: U
s
w
ithout jun
c
g
uarantee
a
e
gaView
®
s
e of silicon
o
c
tion box ad
a
a
water resis
Ima
Ima
Ima
g
2 Installat
i
o
n the RJ4
5
a
pter does
n
tant install.
a
ge 2
a
ge 3
g
e 3-1
¾”NPT
i
on Manu
a
5
connector
n
ot
Pipe
a
l

Page | 6 suppo
8. Use
Me
g
posi
CA
U
arro
and
rt@arecont
v
I
the securit
y
g
aView
®
2 b
r
tion. ( Imag
e
U
TION: Onl
y
w pointing t
o
camera bo
d
I
Adjus
t
A
v
ision.com
mage 4
y
L-key to a
d
r
acket to ap
p
e
5)
Image 5
y
adjust the
s
o
them on t
h
d
y (Image 6
)
mage 6
t
ableScrew
s
A
rrow
d
just
p
ropriate
s
crews with
h
e bracket b
a
)
s

A
recon
t
an
a
se
N
t
N
i
c
r
N
s
f
N
o
p
N
h
Au
d
Auxiliary
P
t
Vision M
e
N
OTE 1: Br
a
t
hat are ta
m
N
OTE
2
: Br
a
i
nstallation i
n
c
amera bo
dy
r
otation. (I
m
N
OTE 3: M
e
s
olution to
p
f
an. Fan is
a
N
OTE 4: T
o
o
r 24VAC,
p
p
ower with
p
N
OTE 5: O
n
h
ave femal
e
Di
g
italI
AudioOut
d
ioIn
P
ower
e
gaView
®
a
cket scre
w
m
per-resista
n
a
cket with 3
in
any locati
o
d
y rotation,
9
m
age 7)
Ima
e
gaView
®
2
i
p
ower the c
a
a
lways on.
o
use the ex
t
p
ower on ca
m
p
igtail cable
n
ly MegaVie
e
3.5mm au
d
Image 8
36
0
n
2 Installat
i
w
s are all se
c
n
t.
axes enabl
e
o
n, includin
g
9
0° tilt, 360°
a
ge 7
i
s a total Po
a
mera, IR ill
u
t
ernal powe
r
m
era, conn
e
connector
(
w
®
2 –A au
d
d
io in / out j
a
360
°
0
°
PoERJ4
5
i
on Manu
a
c
urity screw
s
e
s easy
g
360°
bracket
E class 3
u
minator an
d
r
, 1
2
-48VD
C
e
ct external
(
Image 8)
d
io models
a
ck.
90
°
5
a
l
s
d
C

Arecont Vision MegaView®2 Installation Manual
Page | 7 [email protected]
Optional: Connecting Digital I/O:

9. To use digital I/O, connect digital I/O with
pigtail cable connector as shown in Image
8.
NOTE 1: MegaView®2 only supports digital
input but no digital output.
NOTE 2: Table 1 shows electrical
characteristics
Electrical
Characteristics: Min Max
Input voltage (V)
(measured between
+ and – terminals)
ON 2.9 6.3
OFF 0 1.3
OFF - 0.1
Table 1
NOTE 3: The digital input is electrically isolated
from the rest of the camera’s electrical circuitry
via general-purpose photo couplers. The input
is additionally protected with a serial 250 Ohm
resistor, and a debouncing circuit. Duration of
any input signal should be at least 5 ms to
comply with the requirements of the debouncing
circuit.
NOTE 4: Table 2 shows cable color for digital
input
Green Digital IN +
Black Digital IN -
Table 2
Adjusting the Remote Focus and
Remote Zoom:
NOTE: MegaView®2 camera operating
temperature is -40˚C (-40 °F) to +50˚C (122 °F),
however, motorized lens operating temperature
is -20˚C (-4°F) to +50˚C (122 °F).
10. To adjust focus or zoom, open the camera
web interface and click the “Focus” tab as
shown in image 9.
11. To manually adjust zoom, click the “+20”,
“+5”, “+1”, “-20”, “-5”, “-1” buttons to zoom in
and out, adjusting the field of view.
NOTE 1: “+20” zooms in 20x further than “+1”
NOTE 2: If the “Enable Auto Focus after zoom”
option is checked as shown in image 8, the
focus will automatically be adjusted when zoom
is changed.
12. Set up a focus area (if necessary) by
drawing a rectangle with the mouse (by left-
clicking and dragging the mouse to a
desired zoom size) shown in Image 8.
13. To automatically adjust focus, choose “Full-
range Focusing” or “Fast Focusing”
depending on the image clarity as shown in
image 8.
14. If the image is completely out of focus,
choose “Full-range Focusing” to scan the
full focus range and find the best focus
position.
15. If the image is slightly of out of focus,
choose “Short-rang Focusing” to fine tune
and quickly get a precise focus position to
save time.

Arecont Vision MegaView®2 Installation Manual
Page | 8 [email protected]
16. To manually focus, click the “+20”, “+5”,
“+1”, “-20”, “-5”, “-1” buttons to fine tune the
focus.
Image 9
Adjusting P-Iris:
Note: If “Enable P-Iris” is unchecked, the iris
will be fully open to the maximum. It may
result in less sharpness and artificial color
under strong light condition.













Image 9-1

Arecont Vision MegaView®2 Installation Manual
Page | 9 [email protected]

Optional: Enable Audio:
17. Connect a mono analog microphone to
MICIN (Microphone In) and connect an
active speaker with a built-in amplifier to
LOUT (Line Out) via the in-line jack as
shown in Image 8, if needed.
18. Enable audio on the MegaView®2 Camera
Web interface as shown in Image 10.
NOTE: Audio only works in H.264 RTP/UDP
streaming
.

Image 10





Page | 10 supp

Repl
a
19. Uns
c
20. Use
P
boar
d
21. To r
e
repla
NOTE: I
R
ort@arecon
a
cing t
h
c
rew glass ri
n
P
hillips scre
w
d
(Image 12
)
e
place IR L
E
ce new IR
L
R
LED boar
d
tvision.com
h
e IR L
n
g (Image 1
w
driver to r
e
)
E
D board, u
n
L
ED board (I
d
part numb
e
Image 11
ED bo
a
1)
e
move IR L
E
n
plug cable
a
mage 12-1)
e
r: M00009
4
A
recon
t
a
rd:
E
D
a
nd
4
-34
t
Vision M
e
e
gaView
®
Ima
g
Ima
g
2 Installat
i
g
e 12
g
e 12-1
i
on Manu
a
a
l

Arecont Vision MegaView®2 Installation Manual
Page | 11 [email protected]
Camera Software Installation
22. Install the AV100 application manager
Software. (Image 13, found on the CD).
23. Run the AV100 application manager by
double clicking on the icon shown below.
(Image 14, found on your desktop).
NOTE: you can download latest version AV100
on website
http://www.arecontvision.com/softwares.php
Image 13 Image 14
24. Select “Run” next to “Setup Cameras” from
the AV100 application manager as shown
in Image 15 and wait for “Arecont Vision
Camera Installer” window to appear as
shown in Image 16.
Image 15
25. Click “Mode” tab to select desired install
mode on the Arecont Vision Camera
Installer as shown in Image 16.
NOTE 1: Basic Mode: software will
automatically discover and change / assign IP
address to match PC subnet if they are not
locked.
NOTE 2: Advanced Mode: software will
automatically discover but allow manual update
of the IP address. See “AV100 Installation
Manual” (found on the CD) for details on
Advanced Mode.
NOTE3: User can verify camera model number
and FW version of all cameras as shown in
Image 16.
Image 16
26. For basic mode, select “Install Cameras”
on the Arecont Vision Camera Installer as
shown in Image 16.
27. Confirm that all the cameras connected to
the network switch appear in the upper
window.
28. Repeat Step 24 if all of the cameras do not
appear in the upper window.

Arecont Vision MegaView®2 Installation Manual
Page | 12 [email protected]
CAUTION: If the software does not find a
camera, the software utility may be blocked by
the anti-virus or Windows® firewall. Before
turning them off, please consult your IT
manager.
NOTE : Double click the camera model on the
Camera Installer as shown in Image 17 to
access the camera web interface. See “AV
Camera Web Page User Manual” (found on the
CD) for details on the web interface.
Image 17
29. When all cameras are discovered and
display “Installed, online”, select
“Save/Exit.” The AV100 application
main menu will appear.
30. From the “AV100 Application Manager”
menu, select “Run” next to “Live video”
to view live images.
NOTE: See the “AV100 Installation Manual”
(found on CD) for details on camera
configurations.





























Juncti
adapt
e

Elec
t
(Sol
d
Inside t
h
A.
E
B.
P
Not incl
u

C
g
e
1. Re
m
har
d
2. Atta
c
ele
c
3.
A
tta

A
i
onbox
e
rholes
t
rical B
o
d
Sepa
r
h
e box:
E
lectrical Bo
x
P
ack o
f
four
(
Image
1
u
ded but n
e
C
ommon ele
c
ang box, do
lectrical bo
x
m
ove the ele
c
d
ware from t
c
h the wall
m
c
trical box a
d
ch adapter
t
o
x Ad
a
r
ately)
x
Adapte
r
(
4) machine
8
e
eded:
c
trical box,
s
uble gang b
x
es shown i
n
c
trical box a
he box.
m
ount brack
d
apte
r
.
t
o electrical
b
M
e
Br
a
a
pter (
S
screws
s
uch as sin
g
ox, or squa
r
n
Image 18-
1
dapter and
et to the
b
ox.
e
gaView
®
2
a
cketholes
B
S
V-EBA
g
le
r
e
1
~4.
A
) Instal
Im
a
Ima
g
I
I
lation
I
a
ge 18-1 Si
g
e 18-2 Do
u
I
mage 18-3
I
mage 18-4
I
nstruc
ngle gang
b
u
ble gang b
Square bo
x
Square bo
x
tions
b
ox
ox
x
x

Page | 14 supp
Pole
(Sol
d
Inside t
h
A.
P
B. 2
x
C. 2
x
D. 2
x
E.
P
Not incl
u

S
1.
R
S
2.
A
a
3.
A
(I
4.
R
b
C
i
n
NOT
E
to m
a
con
d
A
ort@arecon
Mount
d
Sepa
r
h
e box:
P
ole Mount
A
x
Compres
s
x
Small Ste
e
x
Large Ste
e
P
ack of four
(
u
ded but n
e
S
V-EBA (Ele
c
I
m
R
emove Pol
e
S
traps and h
a
A
ttach SV-E
B
s shown in I
A
ttach provid
mage 1-B)
t
R
emove the
c
ox adapter
a
C
onduit to J
u
n
Image 20-
1
E
: Use silic
o
a
ke sure no
uit pipe and
B
tvision.com
Adapt
e
r
ately)
A
dapte
r
s
ion Fittings
e
l Straps
e
l Straps
(
4) machine
e
eded:
c
trical box
a
m
age 19
e
Mount Ad
a
a
rdware fro
m
B
A to Pole
M
mage 20.
ed Junction
t
o SV-EBA.
c
onduit plu
g
a
nd connec
t
u
nction Box
A
1
.
o
n or water
p
water leaka
g
junction bo
x
C
e
r (MD
-
screws
a
dapter)
a
pter, steel
m
the box.
M
ount Adapt
e
Box Adapt
e
g
on Junctio
n
t
¾” NPT
A
dapter sh
o
p
ipe seal ta
p
g
e between
x
adapter.
D
E
A
recon
t
-
PMA) I
e
r
e
r
n
wn
p
e
t
Vision M
e
nstalla
5. Run
nec
e
A
da
p
pigt
a
6.
A
tta
c
Mou
n
7. Use
atta
c
pole
scre
w
8. To a
refe
r
nee
d
Ima
g
e
gaView
®
tion In
s
Ethernet C
a
e
ssary) thro
u
p
ter and co
n
a
il cable.
c
h MegaVie
w
nt Adapter
a
the supplie
d
c
h the Pole
M
and tighten
w
s as show
n
djust Mega
V
r
ence “Mou
n
d
ed.
g
e 20
Imag
e
2 Installat
i
s
tructi
o
a
ble and oth
u
gh the Jun
c
n
nect to Me
g
w
®
2 bracke
a
s shown in
d
two Steel
S
M
ount Adap
t
the compre
n
in Image
2
V
iew
®
2 bra
c
n
ting the Ca
m
Image 2
0
e
21
i
on Manu
a
o
ns
e
r
cables (i
f
c
tion Box
g
aView
®
2
t to Pole
Image 21.
S
traps to
t
er to the
ssion
2
1.
c
ket, please
m
era”, i
f
0
-1
a
l




Corn
(Sol
d

Inside t
h
A.
C
B. 2
x
C.
P
D. 2
x
f
o
Not incl
u

S
1.
R
h
2.
A
A
3.
A
(I
4.
R
b
C
i
n
NOT
E
to m
a
con
d
er Mo
u
d
Sepa
r
h
e box:
C
orne
r
Moun
x
Compres
s
P
ack of four
(
x
Packs of f
o
o
ur (4) dry
w
u
ded but n
e
S
V-EBA (Ele
c
Im
a
R
emove Cor
n
ardware fro
m
A
ttach SV-E
B
A
dapter as s
h
A
ttach provid
mage 1-B)
t
R
emove the
c
ox adapter
a
C
onduit to J
u
n
Image 23-
1
E
: Use silic
o
a
ke sure no
uit pipe and
A
nt Ada
r
ately)
t Adapter
s
ion Fittings
(
4) machine
o
ur (4) woo
d
w
all anchors
e
eded:
c
trical box
a
a
ge 22
n
er Mount
A
m
the box.
B
A to Corne
r
h
own in Im
a
ed Junction
t
o SV-EBA.
c
onduit plu
g
a
nd connec
t
u
nction Box
A
1
.
o
n or water
p
water leaka
g
junction bo
x
BC
pter (
M
screws
d
screws an
d
a
dapte
r
)
A
dapter and
r
Mount
a
ge 23.
Box Adapt
e
g
on Junctio
n
t
¾” NPT
A
dapter sh
o
p
ipe seal ta
p
g
e between
x
adapter.
D
M
D-CR
M
d
e
r
n
wn
p
e
5
6
7
8
M
A) Ins
t
5
. Run Eth
e
necess
a
A
dapter
cable.
6
. Attach
M
Mount
A
7
. Using th
hardwar
e
A
dapter
shown i
n
8
. To adju
s
referen
c
needed.
I
m
t
allatio
ernet Cable
a
ry) through
and conne
c
M
egaView
®
2
A
dapter as s
h
e screws pr
o
e) to attach
to an exteri
o
n
Image 24.
s
t MegaVie
w
c
e “Mountin
g
m
age 23
Ima
g
n Instr
u
and other
c
the Junctio
n
c
t to Megavi
e
2
bracket to
h
own in Im
a
o
vided (or
o
the Corner
M
o
r 90° corn
e
w
®
2 bracket
,
g
the Camer
a
Image
2
g
e 24
u
ction
s
c
ables (if
n
Box
e
w® 2 pigta
i
Corner
a
ge 24.
o
ther
M
ount
e
r wall as
,
please
a
”, if
2
3-1
s
i
l

Arecont Vision MegaView®2 Installation Manual
Page | 16 [email protected]




LED Indicators (Camera Signal)

NOTE: To see the LED indicators, open the plug on the camera body as shown in Image 25.

Image 25

LED Status Description
Yellow Flashing Link has been
established.
Solid Normal Operation.
None No connection.
Green Flashing Camera has been
accessed. Normal
operation.
Solid N/A
None No Connection.


Plug

Arecont Vision MegaView®2 Installation Manual
Page | 17 [email protected]
Support
1. Arecont Vision FAQ Page Located at ArecontVision.com
2. Check the following before you call:
Restore camera to factory default with AV100, AV200 or the camera webpage.
Upgrade to the latest firmware by visiting ArecontVision.com.
Isolate the camera on a dedicated network and test with AV100 or AV200.
Swap the “troubled” camera with a known good camera to see if the problem
follows the camera or stays at the location.
3. Contact Arecont Vision Technical Support one of three ways:
1. Online Portal : Support.ArecontVision.com
2. Phone : [phone] (option #1)
3. Email : [email protected]








Arecont Vision MegaView®2 Installation Manual
Page | 18 [email protected]
Mounting Template

JunctionBoxAdapterMountingTemplate
