AREQUIPMENT M860 User manual

M860: Trolley and stretcher – Separable
User Manual

M860: Trolley / Stretcher - Separable
The trolley/stretcher, or M860, is an equipment with separable stretcher of manual drive.
This equipment as for main purpose the transport of patients with mobility difficulties and
post-operation condition. This product is developed and produced by Auto Ribeiro Lda.
Equipment’s Overview
Equipment’s Lateral view

Top view of Equipment
CHARACTERISTICS:
Weight: 32,7 kg (trolley) + 18 kg (stretcher)
Maximum load capacity: 250kg
Trolley dimensions (closed): 1846 x 560 x 455 mm
Trolley dimensions (open): 1846 x 560 x 870 mm
Dimensions (stretcher): 1915 x 568 x 365 mm

FRONT LEG CONTROL (In mid position)
Security System
1º - Lift the lever (in the right side of trolley)
Final Position
WHEELS
Swivel Wheels
2 Swivel wheels
Fixed Wheels
2 Fixed wheels
Block of fixed wheels
1º - Engage the tabs with the foot to lock the
wheels.

BACK LEGS CONTROL
Security System
1º - Press the left lever until it moves and keep
it pressed.
Note: To put the back leg into halfway, just
press the lever and release it immediately.
FRONT LEG CONTROL
Security System
1º - Press the right lever until it moves and keep
it pressed
STRETCHER BLOCK SYSTEM CONTROL
Security system
1º - Press the lever and keep it pressed
2º - Press the stretcher to release the trolley.

TELESCOPIC HANDLES
Security System
1º - Press the button
2º - Push or pull the wrist to fit the desired length
SWING DOWN SIDEARMS
Security System
1º - Press the red button in the sidearm
2º - Push or pull to achieved the desired opening
position.

ADJUSTABLE BACKREST
The backrest can be adjusted in different positions:
Supine position
Semi-fowler’s Position and Fowler Position
1º - Press the red lever
2º - Push or pull the backrest

ADJUSTABLE FEET POSITION
Adjustable feet in three different positions:
Footrest and Knees-Flex Position
Lower Legs part Elevation (16º degrees)
Legs Elevation

SAFETY WARNINGS
This Equipment can be dangerous:
•Risk of entrapment
•Risk of entrapment
MAINTENANCE
•Perform visual inspection every fifty cycles of utilization.
•Lubrication elements of mechanical function every six months with high
viscosity lubricant
•
Checking of tightness of binding elements of every three months.
Proceed to ajust if necessary
ATENTION: USE WITH CAUTION!

ACESSORIES
Fixing Restrain Straps
Shoulder Harness restraints
Legs and feet restrains
Restraint Installation
1º - Tie restraint straps in inner
bars.
2º - Pass the top restraints
through the plate slots
3º - Join belt buckles

ACESSORIES
IV pole
IV pole.
IV pole in use.
Instruments Tray
Instruments tray.
Instruments tray in use.

ACESSORIES
Headrest
1º - Pass the strap through the plate slots
2º - Join both sides of the velcro

MAN AR 42/03/14/00
Rua de S. Caetano, 551 Apartado 526
4411-701 Canelas; Vila Nova de Gaia, Portugal
Telf: [phone] , Fax: [phone]
[email protected]
www.arequipment.com