ARGENTO Active Bike User manual

English | Italiano | Español | Français | Deutsch | Polski | Čeština | Slovenčina
Български | Ελληνικά | Slovenščina | Srpski | Nederlands | Türkçe | عربي
e-scooters
user manual

01
English............................................................................. 02
Italiano............................................................................. 30
Español ........................................................................... 58
Français........................................................................... 86
Deutsch...........................................................................114
Polski .............................................................................. 142
Čeština ........................................................................... 170
Slovenčina..................................................................... 198
Български ................................................................... 226
Ελληνικά ....................................................................... 254
Slovenščina.................................................................. 282
Srpski.............................................................................. 310
Nederlands ...................................................................338
Türkçe............................................................................ 366
يبرع..................................................................................394

02
User manual
Instructions translated from the original Italian
Thank you for choosing this product.
For information, technical support, assistance or to consult the general terms of the warranty,
please contact your dealer or visit www.argentobike.com
English
This manual is valid for the following electric scooters:
Active Bike
Active Sport
Argento by Pininfarina KPF
Active EVO
1. Safety instructions
2. Package contents and assembly
3. Product overview
4. Battery charging and activation
5. Command information / Control panel
6. Quick guide
7. Folding and carrying
8. Range and performance
9. Storage, maintenance and cleaning
10. Technical data sheet
11. Troubleshooting
12. Liability and general terms of warranty
Contents

03
IMPORTANT! Read and follow the instructions carefully before using the item. Keep this manual for future reference or new
users.
Take the time to learn the basics of the procedure to avoid severe accidents that may occur in the first few months. Contact your
dealer for the proper support on how to use the item correctly or to be directed to an appropriate training organisation.
The company assumes no direct or indirect responsibility arising from misuse of the item, non-compliance with both the highway
code and the instructions in the manual, accidents ordisputes caused by non-compliance or illegal activity.
This product is to be used for recreational purposes, by one person only and without passengers, therefore it cannot be used by
more than one person at a time.
Do not modify the intended use of the vehicle in any way. The item is not suitable for stunts,competitions, transporting objects,
towing other vehicles or trailers.
The electric scooter must be used carefully, always respecting the rules imposed by the Highway Code of the country where it is
used, in order to avoid dangerous situations and to take the utmost care of yourself and others.
CAUTION
Driving requirements:
Scooter model Active Bike Active Sport Argento by
Pininfarina KPF
Active EVO
Product code without
indicators AR-MO-210001 AR-MO-210004 PI-MO-210001 -
Product code with indicators
included --PI-MO-210002
PI-MO-220001
AR-MO-210005
AR-MO-220001
MIN weight (Kg) 30 30 30 30
MAX weight (Kg) 100 100 100 100
MIN age * 14 14 14 14
MAX age * 65 65 65 65
MIN height (cm) 120 120 120 120
MAX height (cm) 200 200 200 200
* Before using the product, check and follow local regulations regarding the minimum age of the driver, restrictions on the type
of drivers who can use the product and on the use of the product itself.
The A-weighted emission sound pressure level (noise) at the rider’s ear is less than 70 dB(A).
Symbols identifying the safety warnings
To identify the safety messages in this manual, the following graphic warning symbols will be used. They draw the focus of
attention of the reader/user to the proper, safe use of the item.
CAUTION
Pay attention
Highlights the rules to follow to prevent damage to the item and/or prevent hazardous situations from arising.
1. Safety instructions

04
DANGER
Residual risks
Highlights the rules to follow to prevent damage to the item and/or prevent hazardous situations from arising.
General warnings
CAUTION
It is important to bear in mind that when out in a public space or on the road, even when the instructions in the manual are
observed down to the letter, the rider is not immune to injury caused by infractions or inappropriate actions taken towards other
vehicles, obstacles or persons. Misuse of the item or non-compliance with the instructions provided in this manual may cause
severe injury.
This product is an electric vehicle. The faster you ride, the longer the braking distance. Emergency braking on slippery, muddy,
wet or icy roads may result in wheel spin and loss of balance. Adequate speeds and safety distances from other vehicles or
pedestrians must be adhered to. Take extra care when riding on unfamiliar roads. Do not open the kickstand when using the
item, risk of severe personal injury and damage to item.
CAUTION
On wet roads, the braking distance increases and the grip decreases compared to dryb roads!
Drive more carefully, keep a safe distance!
For personal safety, wear a helmet, and knee and elbow pads to protect against falls and injuries while riding the item. When
allowing others to use the item, ensure that the rider wears the safety equipment and explain the operation of the vehicle. To
avoid injury, do not allow other persons to use the item if they do not know how to use it. Wear shoes before using the item.
Children must not play with the scooter or its parts, nor should they be allowed to clean it or perform maintenance operations.
When riding, take special care to not frighten children or pedestrians. When passing behind them, warn them by sounding the
horn and slow down using the minimum speed of 6km/h.

05
Instructions and warnings on rider behaviour
Conditions Appropriate / intended use Improper use
Riders One More than one person, with children or animals
Safety equipment Helmet, knee pads, elbow pads, reflective vest No safety equipment
Pre-riding check
Prior to each use, check brakes and any wear, check
tyre pressure (see side of tyre for recommended
value), wheel wear, throttle, indicators, lights and
charge status of battery.
Never checking the item prior to use
If any unusual noises or faults are detected, do not
use the item and contact your dealer or the Authorised
Technical Support Department
Using the item when noise or faults are present
Walking while
pushing the item
Not accelerating Depressing the throttle
Pushing while walking across pedestrian crossings Riding the vehicle on pedestrian crossings
In pedestrian areas when not in pedestrian mode
(6 km/h)
Riding the vehicle in pedestrian areas when not in pedestrian
mode (6 km/h)
In overcrowded areas Riding the vehicle in overcrowded areas
Stationary
The person riding the item must be able to easily place
both feet on the ground while holding the handlebars at
the correct height
Not being able to keep the item stationary and balanced
Sitting on the item while it is running or stationary
No objects hanging from handlebars Objects hanging from handlebars result in instability and may
impede manoeuvring
Riding with both hands on handlebars One-handed or hand-free riding
Not using devices such as phones, smartwatches,
music players, or headphones
Using devices such as phones, smartwatches, music layers,
or headphones
Riding with both feet on the footrest comfortably
and safely
Riding with one or both feet outside the footrest
It is prohibited to place or amass weight on the rear mudguar
Riding under
normal conditions Riding with helmet and protective equipment Riding without helmet and protective equipment
Riding on easily accessible, smooth and compact
roads, avoiding areas with intense trac or
overcrowded areas: e.g. dedicated cycle path, smooth
paved surfaces
Riding on motorways, long-distance roads
Riding on busy roads
Riding on pavements
Riding in overcrowded areas
Riding on very rough roads
Riding near: ravines, escarpments, harbours, sea, lakes or rivers
Complying with local regulations and the highway code Failure to comply with regulations and the highway code
Looking ahead and watching out for obstacles,
vehicles or nearby pedestrians Becoming distracted while riding
Changing direction, making sure to be seen,
moderating speed
Changing direction abruptly at high speed without making
sure that you have been seen
Anticipating the route and moderating speed while
observing the highway code and those that are the
most vulnerable
Braking and cornering at the same time makes the vehicle
unstable
Using direction indicators, if included on the item Not using direction indicators
Slowing down when pedestrians are present Accelerating or maintaining a constant speed when
pedestrians are present
Using pedestrian mode in pedestrian areas (6 km/h) Riding without using pedestrian mode in pedestrian areas
(6 km/h)
Warning others of your presence by using the bell Not warning others of your presence by using the bell

06
Conditions Appropriate / intended use Improper use
Uneven road
conditions: speed
bumps/ steps/
rough road
surfaces
Riding at moderate speeds High-speed riding
Bend knees slightly for better shock absorption when
traversing uneven surfaces.
Accelerating over bumps or ditches, going down steps,
jumping over obstacles, climbing pavements, riding harshly.
Behaviour:
around bends,
down slopes, in
the presence of
nearby obstacles,
vehicles and
pedestrians
Keeping at a safe distance Not observing safety distances
Ceasing to accelerate
Braking and slowing down Accelerating
Riding at moderate speed and braking safely Riding at high speed, braking suddenly
Paying attention to doors and other high obstacles Traversing beneath high obstacles
Visibility
conditions
Only ride if there is enough light to ride safely. When
riding in unfavourable lighting conditions (from half an
hour following sunset, throughout the entire period
of darkness and even during the day, if weather
conditions preclude road visibility, when driving
through tunnels), remember to switch on the item’s
lights and wear a reflective vest, belts or bands
Driving in adverse conditions: in the rain, in case of snowfall,
in the presence of ice or mud on the road, in case of strong
wind and fog
Weather
conditions Driving in optimal conditions (no rain)
Guida in condizioni avverse:
sotto la pioggia, quando nevica, in presenza di ghiaccio o
fango sulla strada, forte vento, in caso di nebbia.
Parking
In designated areas without impeding movement of
vehicles or pedestrians Everywhere, impeding movement of vehicles or pedestrians
On smooth surfaces, ensuring stability is maintained On uneven surfaces and without ensuring stability
Switching o the item and using an anti-theft device
Using the kickstand provided
Leaving the item switched on, unattended with no anti-theft
device
Engaging in
extreme sports/
acrobatics
NO
YES
Riding near: ravines, escarpments, harbours, sea, lakes
or rivers
Riding through puddles
Racing with other vehicles
Subjecting the
item to forceful
impact
NO
YES
jumping over object or persons, jumping o steps or from
high places
What to do after a fall:
Check that the throttle lever works properly. To do this, accelerate and decelerate several times.
Check that the brakes work properly. To do this, get o the item, push it forward and brake to ensure it responds to the controls.
Check that all vehicle components are in place and securely fastened.
Check tyre wear and pressure (see side of tyre for recommended value).
Check the wear of the brakes and cables.
DANGER
The brakes may become hot during use. Do not touch after use.

07
Assembled item, the handlebar must be installed using the special screws contained in the package
Model Reference picture In the package Handlebar assembly
Active Bike
battery charger
charging cable
wheel / mudguard / headlight /
front light
1 bolt, 1 nut, 2 washers
size 5 Allen wrench
Spanners 10-8
2 start keys
Install the handlebar onto the
stem and tighten the lever
Active Sport
battery charger
charging cable
7 M4 screws
size 2.5 Allen wrench
size 4 and 5 Allen wrench
adapter for inflating the tires
folding system ring
Argento by
Pininfarina
KPF
battery charger
charging cable
2 M5 screws and 2 washers
size 3 Allen wrench
2. Package contents and assembly

08
Active Evo
Battery
charger cable
4 bolts M6
Allen key 4
Method:
• Take the item out of the packaging
• Open the kickstand and check that the item is stable
Active Sport instructions
• Open the handlebar stem and secure it by closing the lever of the closing mechanism
• Connect the display power cable to the main wiring
• Install the handlebar on the stem (do not crush the cables)
• Tighten the screws on the stem using the wrench supplied
• Install the folding system ring
• Adjust the stem closing mechanism*
Argento by Pininfarina KPF - instructions
• Open the handlebar stem and secure it by closing the lever of the closing mechanism
• Connect the display power cable to the main wiring
• Install the handlebar on the stem (do not crush the cables)
• Tighten the screws on the stem using the wrench supplied
• Adjust the stem closing mechanism*
Active EVO instructions
• Open the handlebar stem and secure it by closing the lever on the locking mechanism
• Connect the display power cable to the main wiring (if necessary)
• Install the handlebar on the stem (do not crush cables)
• Insert and tighten the stem bolts using the provided spanner
• Adjust the locking mechanism on the stem* (if necessary)

09
Model Reference picture * Adjustment
Active Sport
Outside the mechanism there is a hex socket screw. If the
handlebar stem is not very stable after closing, adjust the screw
in the mechanism, by tightening or loosening it as required to
increase the stability of the stem.
Argento by
Pininfarina
KPF
There is a hex screw inside the mechanism.
If the handlebar stem is not very stable after closing, adjust
the screw in the mechanism, by tightening or loosening it as
required to increase the stability of the stem.
Active EVO
There is a hex screw inside the mechanism.
If the handlebar stem is not very stable after closing, adjust
the screw in the mechanism, by tightening or loosening it as
required to increase the stability of the stem.

10
Active Bike wheel assembly instructions
Method:
1. Remove the front wheel from the packaging
2. Remove the quick release from the front wheel
3. Connect the quick release to the fork
4. Remove and install the front mudguard and headlight with the bolt, nut and washers provided
5. Tighten the mudguard rods on the fork
6. Ensure that the brake caliper does not come into contact with the rod
7. Adjust the stem closing mechanism
CAUTION
Assemble the item correctly. If, during assembly, any factory defects are detected, certain steps are unclear or issues with
assembly or adjustments occur, do not ride the vehicle and contact your dealer or visit www.argentobike.com for technical
support.
Do not use accessories and/or additional parts that are not approved by the manufacturer.
Keep children away from plastic items (including packaging materials) and small parts that may result in suocation.
It is forbidden to modify or transform the item or any its parts in any way, as this may impair eciency, reduce structural integrity
and cause damage. Remove any sharp edges caused by misuse, breakage or damage to the item. If any factory defects, unusual
noises or faults are detected, do not ride the vehicle and contact your dealer or visit www.argentobike.com for technical support.

11
In the interest of technological development, the manufacturer reserves the right to modify the item with no prior notice and this
manual will not be automatically updated.
For further information and to consult dierent versions of the manual, visit the website www.argentobike.com
Disc brake
Locking catch
Folding system ring
Throttle
Brake lever
Headlight
Rear light
Rear fork
Front fork
Rear wheel
Bell
Footrest
Frame Direction
indicators
Stand
Safety mechanism
Loading
door
Locking mechanism
Motor and
electronic brake
Front wheel
Active Bike
Display
Throttle
Front brake
lever
Motor
Rear light
Rear wheel
Locking catch
Headlight
Handlebar
release lever
Light switch
Bell
Footrest
Stand
Frame Disc brake
Safety mechanism
Handlebar stem
Stem release lever
Ignition switch
Rear brake lever
Loading door
Locking mechanism
Disc brake
Front wheel
3. Product overview
Active Sport

12
Rear
suspension
fork
Drum brake
Throttle Display Locking catch
Brake lever
Motor and
electronic brake
Frame Stand
Safety
mechanism
Charging
port Footrest
Locking catch
Locking
mechanism
Front fork
Argento by Pininfarina KPF
Display
Grips
Throttle
Headlight
Active EVO
Brake lever
On/O/control button
Handlebar column locking hook
Safety hook
Locking mechanism lever
Front wheel Rear drive wheel
Rear light
Front brake
Brake
cable Footrest
Stand Charging
port
Rear mudguard
Handlebar stem
locking clip
4. Battery charging and activation

13
4. Battery charging and activation
Prior to using the item for the first time, charge to 100%. Ensure the item, charger, and charging port are dry.
Instructions:
Open the kickstand
Turn o the electric scooter
Model Reference picture Instructions
Active Bike
- Remove the rubber cover from the
charging socket
- Connect the battery charger to the
charging port and then to the power
socket.
- When the item is fully charged, the
light on the charger changes from
red (charging) to green (charging
complete).
- After charging, close the rubber cover
on the charging socket
- Unplug the battery charger from the
power socket
Active Sport
- Remove the rubber cover from the
charging socket
- Connect the battery charger to the
charging port and then to the power
socket
- When the item is fully charged, the
light on the charger changes from
red (charging) to green (charging
complete)
- After charging, close the rubber cover
on the charging socket
- Unplug the battery charger from the
power socket

14
Argento by
Pininfarina
KPF
- Remove the rubber cover from the
charging socket
- Connect the battery charger to the
charging port and then to the power
socket.
- When the item is fully charged, the
light on the charger changes from
red (charging) to green (charging
complete)
- After charging, close the rubber cover
on the charging socket
- Unplug the battery charger from the
power socket
Active EVO
- Remove the rubber cover from the
charging socket.
- Connect the charger to the wall outlet
and then to the charging port.
- When the item is fully charged, the
light on the charger changes from
red (charging) to green (charging
complete).
- After charging, reinsert the rubber
cover into the charging socket.
- Disconnect the charger from the
charging port and then from the
wall outlet.
CAUTION
To recharge the item, use the battery charger supplied ONLY
Model Battery charger model Output voltage Charging time
Active Bike XHK-800B-4220 42V – 2A 6 h
Active Sport XVE126-6300180 63V – 1.8A 7 h
Argento by
Pininfarina KPF HLT-180-4202000 42V – 2A 5 h
Active EVO FY0634201500 42V – 1.5A 4 h

15
Using another type of charger may damage the scooter or entail other potential risks.
Never leave the product unsupervised while it is charging. Do not switch the product on while it is charging.
After each use, fully recharge the battery to extend its useful life. Do not recharge the item immediately after use. Allow the
scooter to cool for an hour before recharging.
The item should not be charging for extended periods. Overcharging reduces battery life and poses additional potential hazards.
Allow the vehicle to discharge completely to prevent damage to the battery.
Damage caused by the battery being left uncharged for a long period is irreversible and is not covered by the limited warranty.
Once the damage has occurred, the battery cannot be recharged (the battery must not be dismantled by unqualified personnel,
as this could lead to electric shocks, short circuits or even major safety incidents). If the owner is away, e.g. on holiday, and the
device is entrusted to a third party, leave it in a partial charge state (20% - 50% charge), not fully charged.
Carry out regular visual inspection of the charger and charger cables. If the battery charger cable is clearly damaged, do not use
it to avoid further damage and/or risks; please contact us for a replacement.
Battery warnings
The battery consists of lithium-ion cells and chemical elements that are hazardous to health and the environment. Do not use
the item if it emits odours, substances or excessive amounts of heat. Do not dispose of the item or the battery with household
waste. The end user is responsible for the disposal of electrical and electronic equipment and batteries in compliance with all
applicable regulations.
Avoid used, defective and/or non-original batteries of other models or brands.
DANGER
Do not leave the battery near fire or heat sources. Fire and explosion hazard.
Do not open the battery or take it apart. Do not strike, throw, or puncture the battery or attach objects onto it.
Do not touch any substances leaking from the battery, as they are deemed hazardous.
Do not allow children or pets to touch the battery.
Do not overcharge or short-circuit the battery. Fire and explosion hazard.
Do not immerse or expose the battery to water, rain or other liquids.
Do not expose the battery to direct sunlight, excessive heat or cold (for example, do not leave the item or battery in a car in
direct sunlight for extended periods of time), or environments containing explosive gases or flames.
Do not carry or store the battery with metal objects such as hairpins, necklaces, etc. Contact between metal objects and battery
contacts may cause a short circuit resulting in physical injury or death.

16
5. Command information / Control panel
Active Bike
Ignition switch (A), to turn the display on/o, insert key into the
ignition switch and turn the key to the right.
Function button (B): press button (B) briefly once to select the
desired speed level.
Throttle (C): turn the handle downwards to accelerate.
Front brake (D): pull the lever to brake
Rear brake (E): pull the lever to brake
Lights: press button (F) once to turn on/o
Bell: press button (G) once to activate.
Active Sport
Throttle (A): press down to accelerate.
Power button (B): press to switch the item on/o.
Brake lever (C): pull the lever to brake
Speed level change: press the button (B) twice to select the
desired level.
Lights: press the button (B) once to switch them on/o.
Horn: press the button (D) once to activate it
Argento by Pininfarina KPF
Operation of direction indicators
(if present)
Throttle (A): press down to accelerate.
Power button (B): Press to switch the item on/o.
Brake lever (C): pull the lever to brake
Speed level change: press the button (B) once to select the
desired level.
Quickly press 3 times in a row to switch from Km/h to Mph.
Quickly press 4 times in a row to switch from ODO to TRIP.
Lights: press the button (B) twice to switch them on/o.
Horn: press the button (D) once to activate it

17
5. Command information / Control panel Active EVO
Throttle (A): press down to accelerate.
Power button (B): Press to switch the product on or o.
Brake lever (C): pull the lever to brake.
Change speed level (B): press once to select the desired speed
level.
Change unit of measurement (B): Press quickly 3 times
consecutively (km/h - mph).
Lights (B): press twice to switch on or o.
Bell (D): press lever (D) once to activate it
Model Reference picture Symbols
Active Bike
1. Battery Level: The battery level is indicated by 4 bars.
2. Speedometer: displays the current speed of the
scooter
3. ODO: Total distance travelled.
4. TRIP: Single trip distance.
5. Press and hold the button (5) for 4 seconds to switch
from TRIP to ODO
6. Level 1/Pedestrian mode - The display shows 1. (up
to 6 km/h). Level 2 - The display shows 2. (up to 20
km/h). Level 3 - The display shows 3. (up to 25 km/h).
Cruise Control: Speed control. It is activated after the
same speed has been maintained for a few seconds.
The display emits a short beep.
Active Sport
1. Battery Level: The battery level is indicated by 5 bars.
2. Speedometer: Displays the current speed of the
scooter.
3. Direction indicators: the indicator light turns on when
turning right or left
4. Service light: indicates that maintenance is required
by the assistance service
5. Level 1 - The display will show ECO (up to 6 km/h).
6. Level 2 - The display will show D (up to 20 km/h).
7. Level 3 - The display will show S+ (up to 25 km/h).
8. Lights indicator light.
9. Pedestrian mode - Help to push the vehicle. It
is activated by squeezing the brake lever and
simultaneously pressing the power button twice

18
Argento by
Pininfarina
KPF
1. Speedometer: Displays the current speed of the
scooter.
2. Battery Level: The battery level is indicated by 7 bars.
3. ODO: Total distance travelled.
4. TRIP: Single trip distance.
5. Lights indicator light.
6. Level 3 - The display will show S (up to 25 km/h).
7. Level 2 - The display will show D (up to 20 km/h).
8. Level 1 - The display will show ECO (up to 6 km/h).
9. Cruise Control: Speed control. It is activated after the
same speed has been maintained for a few seconds.
The display emits a short beep.
Active EVO
1. Speedometer: displays the instantaneous speed of
the scooter.
2. Battery level: battery level is indicated by 5 bars
3. Service light: indicates that maintenance is required
by the assistance service
4. Temperature: indicates motor overheating
5. Speed mode:
Level 1 – white.
Level 2 – orange.
Level 3 – red.
6. Cruise control: Speed control. It is activated after the
same speed has been maintained for a few seconds.
The display emits a short beep.

19
Direction indicators (if present)
Models *
Argento by
Pininfarina
KPF Drive:
On models where they are fitted, the
direction indicators are placed at the ends
of the handlebars (left and right side).
The direction indicators are required to
provide early warning of any change in
direction while riding.
CAUTION
Before each use of the product, check
the correct operation of the direction
indicators.
Argento
Active EVO Drive:
On models where they are fitted, the
direction indicators are placed at the ends
of the handlebars (left and right side).
The direction indicators are required to
provide early warning of any change in
direction while riding.
CAUTION
Before each use of the product, check
the correct operation of the direction
indicators.