ARGENTO E-MOBILITY Active Bike User manual

English | Italiano | Español | Français | Deutsch | Polski | Čeština | Slovenčina
Български | Ελληνικά | Slovenščina | Srpski | Nederlands | عربي | Türkçe
e-scooters
user manual

01
English............................................. 02
Italiano ............................................ 37
Español............................................ 72
Français.......................................... 107
Deutsch..........................................142
Polski.............................................. 177
Čeština ...........................................212
Slovenčina .....................................247
Български.................................... 282
Ελληνικά......................................... 317
Slovenščina .................................. 352
Srpski..............................................387
Nederlands ................................... 422
يبرع .................................................457
Türkçe............................................ 491

02
User manual
Instructions translated from the original Italian
Thank you for choosing this product.
For information, technical support, assistance or to consult the general terms of the warran-
ty, please contact your dealer or visit www.argentobike.com
English
This manual is valid for the following electric scooters:
Active Bike
Active Sport
Argento by Pininfarina KPF

03
1. Safety instructions
2. Package contents and assembly
3. Product overview
4. Battery charging and activation
5. Command information / Control panel
6. Quick guide
7. Folding and carrying
8. Range and performance
9. Storage, maintenance and cleaning
10. Technical data sheet
11. Troubleshooting
12. Liability and general terms of warranty
13. Information on disposal
14. Declaration of conformity
Contents

04
1. Safety instructions
IMPORTANT! Read and follow the instructions carefully before using the item. Keep this
manual for future reference or new users.
Take the time to learn the basics of the procedure to avoid severe accidents that may occur
in the first few months. Contact your dealer for the proper support on how to use the item
correctly or to be directed to an appropriate training organisation.
The company assumes no direct or indirect responsibility arising from misuse of the item,
non-compliance with both the highway code and the instructions in the manual, accidents or
disputes caused by non-compliance or illegal activity.
This product is to be used for recreational purposes, by one person only and without
passengers, therefore it cannot be used by more than one person at a time.
Do not modify the intended use of the vehicle in any way. The item is not suitable for stunts,
competitions, transporting objects, towing other vehicles or trailers.
The electric scooter must be used carefully, always respecting the rules imposed by the
Highway Code of the country where it is used, in order to avoid dangerous situations and to
take the utmost care of yourself and others.
CAUTION
Driving requirements:
Scooter model Active Bike Active Sport Argento by Pininfarina KPF
Product code without
indicators AR-MO-210001 AR-MO-210004 PI-MO-210001
Product code with
indicators included - - PI-MO-210002
MIN weight (Kg) 30 30 30
MAX weight (Kg) 100 100 100
MIN age * 14 14 14
MAX age * 65 65 65
MIN height (cm) 120 120 120
MAX height (cm) 200 200 200
* Before using the product, check and follow local regulations regarding the minimum age of the driver, restrictions
on the type of drivers who can use the product and on the use of the product itself.
The A-weighted emission sound pressure level (noise) at the rider’s ear is less than 70 dB(A).

05
1. Safety instructions
Symbols identifying the safety warnings
To identify the safety messages in this manual, the following graphic warning symbols will be
used. They draw the focus of attention of the reader/user to the proper, safe use of the item.
CAUTION
Pay attention
Highlights the rules to follow to prevent damage to the item and/or prevent hazardous
situations from arising.
DANGER
Residual risks
Highlights the presence of hazards that generate residual risks to which the user must pay
attention to avoid injury or material damage.
General warnings
CAUTION
It is important to bear in mind that when out in a public space or on the road, even when the
instructions in the manual are observed down to the letter, the rider is not immune to injury
caused by infractions or inappropriate actions taken towards other vehicles, obstacles or
persons. Misuse of the item or non-compliance with the instructions provided in this manual
may cause severe injury.
This product is an electric vehicle. The faster you ride, the longer the braking distance.
Emergency braking on slippery, muddy, wet or icy roads may result in wheel spin and loss
of balance. Adequate speeds and safety distances from other vehicles or pedestrians must
be adhered to. Take extra care when riding on unfamiliar roads. Do not open the kickstand
when using the item, risk of severe personal injury and damage to item.
CAUTION
On wet roads, the braking distance increases and the grip decreases compared to dry
roads!
Drive more carefully, keep a safe distance!
For personal safety, wear a helmet, and knee and elbow pads to protect against falls and
injuries while riding the item. When allowing others to use the item, ensure that the rider
wears the safety equipment and explain the operation of the vehicle. To avoid injury, do not
allow other persons to use the item if they do not know how to use it. Wear shoes before
using the item.
Children must not play with the scooter or its parts, nor should they be allowed to clean it or
perform maintenance operations.
When riding, take special care to not frighten children or pedestrians. When passing behind
them, warn them by sounding the horn and slow down using the minimum speed of 6km/h.

06
Instructions and warnings on rider behaviour
Conditions Appropriate / intended use Improper use
Riders One More than one person, with children or
animals
Safety equipment Helmet, knee pads, elbow pads,
reflective vest
No safety equipment
Pre-riding check
Prior to each use, check brakes and
any wear, check tyre pressure (see
side of tyre for recommended value),
wheel wear, throttle, indicators, lights
and charge status of battery.
Never checking the item prior to use
If any unusual noises or faults are
detected, do not use the item and
contact your dealer or the Authorised
Technical Support Department
Using the item when noise or faults are
present
Walking while
pushing the item
Not accelerating Depressing the throttle
Pushing while walking across
pedestrian crossings
Riding the vehicle on pedestrian
crossings
In pedestrian areas when not in
pedestrian mode (6 km/h)
Riding the vehicle in pedestrian areas
when not in pedestrian mode (6 km/h)
In overcrowded areas Riding the vehicle in overcrowded areas
Stationary
The person riding the item must be
able to easily place both feet on the
ground while holding the handlebars
at the correct height
Not being able to keep the item
stationary and balanced.
Sitting on the item while it is running or
stationary
No objects hanging from handlebars Objects hanging from handlebars
result in instability and may impede
manoeuvring
Riding with both hands on
handlebars.
One-handed or hand-free riding
Not using devices such as phones,
smartwatches, music players, or
headphones
Using devices such as phones,
smartwatches, music players, or
headphones
Riding with both feet on the footrest
comfortably and safely
Riding with one or both feet outside the
footrest
It is prohibited to place or amass weight
on the rear mudguard.
Riding under
normal conditions
Riding with helmet and protective
equipment
Riding without helmet and protective
equipment

07
Conditions Appropriate / intended use Improper use
Riding on easily accessible, smooth
and compact roads, avoiding areas
with intense trac or overcrowded
areas:
e.g. dedicated cycle path, smooth
paved surfaces
Riding on motorways, long-distance
roads
Riding on busy roads
Riding on pavements
Riding in overcrowded areas
Riding on very rough roads
Riding near: ravines, escarpments,
harbours, sea, lakes or rivers
Complying with local regulations and
the highway code
Failure to comply with regulations and
the highway code
Looking ahead and watching out
for obstacles, vehicles or nearby
pedestrians
Becoming distracted while riding
Changing direction, making sure to
be seen, moderating speed
Changing direction abruptly at high
speed without making sure that you
have been seen
Anticipating the route and
moderating speed while observing
the highway code and those that are
the most vulnerable
Braking and cornering at the same time
makes the vehicle unstable
Using direction indicators, if included
on the item
Not using direction indicators
Slowing down when pedestrians are
present
Accelerating or maintaining a constant
speed when pedestrians are present
Using pedestrian mode in pedestrian
areas (6 km/h)
Riding without using pedestrian mode in
pedestrian areas (6 km/h)
Warning others of your presence by
using the bell
Not warning others of your presence by
using the bell
Uneven road
conditions:
speed bumps/
steps/rough road
surfaces
Riding at moderate speeds High-speed riding
Bend knees slightly for better shock
absorption when traversing uneven
surfaces.
Accelerating over bumps or ditches,
going down steps, jumping over
obstacles, climbing pavements, riding
harshly.
Behaviour:
around bends,
down slopes, in
the presence of
nearby obstacles,
vehicles and
pedestrians
Keeping at a safe distance Not observing safety distances
Ceasing to accelerate
Braking and slowing down
Accelerating
Riding at moderate speed and
braking safely
Riding at high speed, braking suddenly
Paying attention to doors and other
high obstacles
Traversing beneath high obstacles

08
Conditions Appropriate / intended use Improper use
Visibility conditions
Only ride if there is enough light
to ride safely. When riding in
unfavourable lighting conditions
(from half an hour following sunset,
throughout the entire period of
darkness and even during the day,
if weather conditions preclude
road visibility, when driving through
tunnels), remember to switch on the
item’s lights and wear a reflective
vest, belts or bands.
Riding in unfavourable lighting
conditions with lights o and without
using a reflective vest, belts or bands.
Weather conditions
Driving in optimal conditions (no rain) Driving in adverse conditions:
in the rain, in case of snowfall, in the
presence of ice or mud on the road, in
case of strong wind and fog.
Parking
In designated areas without
impeding movement of vehicles or
pedestrians
Everywhere, impeding movement of
vehicles or pedestrians
On smooth surfaces, ensuring
stability is maintained
On uneven surfaces and without
ensuring stability
Switching o the item and using an
anti-theft device
Using the kickstand provided
Leaving the item switched on,
unattended with no anti-theft device
Engaging in
extreme sports/
acrobatics
NO YES
Riding near: ravines, escarpments,
harbours, sea, lakes or rivers
Riding through puddles
Racing with other vehicles
Subjecting the
item to forceful
impact
NO YES
jumping over object or persons, jumping
o steps or from high places
What to do after a fall:
Check that the throttle lever works properly. To do this, accelerate and decelerate several
times.
Check that the brakes work properly. To do this, get o the item, push it forward and brake
to ensure it responds to the controls.
Check that all vehicle components are in place and securely fastened.
Check tyre wear and pressure (see side of tyre for recommended value).
Check the wear of the brakes and cables.
DANGER
The brakes may become hot during use. Do not touch after use.

09
Assembled item, the handlebar must be installed using the special screws contained in the
package.
Model Reference picture In the package Handlebar assembly
Active Bike
battery charger
charging cable
wheel /
mudguard /
headlight / front
light
1 bolt, 1 nut, 2
washers
size 5 Allen
wrench
Spanners 10-8
2 start keys
Install the handlebar onto the
stem and tighten the lever
Active
Sport
battery charger
charging cable
7 M4 screws
size 2.5 Allen
wrench
size 4 and 5
Allen wrench
adapter for
inflating the tires
folding system
ring
2. Package contents and assembly

10
Argento by
Pininfarina
KPF
battery charger
charging cable
2 M5 screws and
2 washers
size 3 Allen
wrench
Method:
• Take the item out of the packaging
• Open the kickstand and check that the item is stable
Active Sport instructions
• Open the handlebar stem and secure it by closing the lever of the closing mechanism
• Connect the display power cable to the main wiring
• Install the handlebar on the stem (do not crush the cables)
• Tighten the screws on the stem using the wrench supplied
• Install the folding system ring
• Adjust the stem closing mechanism*
Argento by Pininfarina KPF - instructions
• Open the handlebar stem and secure it by closing the lever of the closing mechanism
• Connect the display power cable to the main wiring
• Install the handlebar on the stem (do not crush the cables)
• Tighten the screws on the stem using the wrench supplied
• Adjust the stem closing mechanism*

11
Model Reference picture * Adjustment
Active Sport
Outside the mechanism there is a hex socket
screw. If the handlebar stem is not very stable
after closing, adjust the screw in the mechanism,
by tightening or loosening it as required to
increase the stability of the stem.
Argento by
Pininfarina
KPF
There is a hex screw inside the mechanism.
If the handlebar stem is not very stable after
closing, adjust the screw in the mechanism, by
tightening or loosening it as required to increase
the stability of the stem.
Active Bike wheel assembly instructions

12
Method:
1. Remove the front wheel from the packaging
2.Remove the quick release from the front wheel
3. Connect the quick release to the fork
4. Remove and install the front mudguard and headlight with the bolt, nut and washers
provided
5.Tighten the mudguard rods on the fork
6.Ensure that the brake caliper does not come into contact with the rod
7. Adjust the stem closing mechanism
CAUTION
Assemble the item correctly. If, during assembly, any factory defects are detected, certain
steps are unclear or issues with assembly or adjustments occur, do not ride the vehicle and
contact your dealer or visit www.argentobike.com for technical support.
Do not use accessories and/or additional parts that are not approved by the manufacturer.
Keep children away from plastic items (including packaging materials) and small parts that
may result in suocation.
It is forbidden to modify or transform the item or any its parts in any way, as this may impair
eciency, reduce structural integrity and cause damage. Remove any sharp edges caused
by misuse, breakage or damage to the item. If any factory defects, unusual noises or faults
are detected, do not ride the vehicle and contact your dealer or visit www.argentobike.com
for technical support.

13
In the interest of technological development, the manufacturer reserves the right to modify
the item with no prior notice and this manual will not be automatically updated.
For further information and to consult dierent versions of the manual, visit the website
www.argentobike.com
Active Bike
3. Product overview
Display
Throttle
Front brake
lever
Motor
Rear
light
Rear
wheel
Locking
catch
Headlight
Handlebar
release lever
Light switch
Bell
Footrest
Stand
Frame Disc brake
Safety mechanism
Handlebar stem
Stem release lever
Ignition switch
Rear brake lever
Loading door
Locking mechanism
Disc brake
Front wheel

14
Active Sport
Disc
brake
Locking catch
Folding system ring
Throttle
Brake lever
Headlight
Rear light
Rear fork
Front
fork
Rear
wheel
Bell
Footrest
Frame Direction
indicators
Stand
Safety mechanism
Loading
door
Locking mechanism
Motor and
electronic
brake
Front
wheel

15
Rear
suspension
fork
Drum brake
Throttle Display
Locking catch
Brake lever
Motor and
electronic
brake
Frame Stand
Safety
mechanism
Charging
port Footrest
Locking catch
Locking
mechanism
Front fork
Argento by Pininfarina KPF

16
Prior to using the item for the first time, charge to 100%. Ensure the item, charger, and
charging port are dry.
Instructions:
Open the kickstand.
Turn o the electric scooter.
Model Reference picture Instructions
Active Bike
- Remove the rubber cover
from the charging socket
- Connect the battery
charger to the charging
port and then to the power
socket.
- When the item is fully
charged, the light on the
charger changes from
red (charging) to green
(charging complete).
- After charging, close
the rubber cover on the
charging socket
- Unplug the battery charger
from the power socket
Active Sport
- Remove the rubber cover
from the charging socket
- Connect the battery
charger to the charging
port and then to the power
socket.
- When the item is fully
charged, the light on the
charger changes from
red (charging) to green
(charging complete).
- After charging, close
the rubber cover on the
charging socket
- Unplug the battery charger
from the power socket
4. Battery charging and activation

17
Argento by
Pininfarina
KPF
- Remove the rubber cover
from the charging socket
- Connect the battery
charger to the charging
port and then to the power
socket.
- When the item is fully
charged, the light on the
charger changes from
red (charging) to green
(charging complete).
- After charging, close
the rubber cover on the
charging socket
- Unplug the battery charger
from the power socket
CAUTION
To recharge the item, use the battery charger supplied ONLY.
Model Battery charger model Output voltage Charging time
Active Bike XHK-800B-4220 42V – 2A 6 h
Active Sport XVE126-6300180 63V – 1.8A 7 h
Argento by
Pininfarina KPF HLT-180-4202000 42V – 2A 5 h
Using another type of charger may damage the scooter or entail other potential risks.
Never leave the product unsupervised while it is charging. Do not switch the product on while
it is charging.
After each use, fully recharge the battery to extend its useful life. Do not recharge the item
immediately after use. Allow the scooter to cool for an hour before recharging.
The item should not be charging for extended periods. Overcharging reduces battery life
and poses additional potential hazards.
Allow the vehicle to discharge completely to prevent damage to the battery.
Damage caused by the battery being left uncharged for a long period is irreversible and is
not covered by the limited warranty. Once the damage has occurred, the battery cannot be
recharged (the battery must not be dismantled by unqualified personnel, as this could lead

18
to electric shocks, short circuits or even major safety incidents). If the owner is away, e.g. on
holiday, and the device is entrusted to a third party, leave it in a partial charge state (20% -
50% charge), not fully charged.
Carry out regular visual inspection of the charger and charger cables. If the battery charger
cable is clearly damaged, do not use it to avoid further damage and/or risks; please contact
us for a replacement.
Battery warnings
The battery consists of lithium-ion cells and chemical elements that are hazardous to
health and the environment. Do not use the item if it emits odours, substances or excessive
amounts of heat. Do not dispose of the item or the battery with household waste. The end
user is responsible for the disposal of electrical and electronic equipment and batteries in
compliance with all applicable regulations.
Avoid used, defective and/or non-original batteries of other models or brands.
DANGER
Do not leave the battery near fire or heat sources. Fire and explosion hazard.
Do not open the battery or take it apart. Do not strike, throw, or puncture the battery or
attach objects onto it.
Do not touch any substances leaking from the battery, as they are deemed hazardous.
Do not allow children or pets to touch the battery.
Do not overcharge or short-circuit the battery. Fire and explosion hazard.
Do not immerse or expose the battery to water, rain or other liquids.
Do not expose the battery to direct sunlight, excessive heat or cold (for example, do
not leave the item or battery in a car in direct sunlight for extended periods of time), or
environments containing explosive gases or flames.
Do not carry or store the battery with metal objects such as hairpins, necklaces, etc. Contact
between metal objects and battery contacts may cause a short circuit resulting in physical
injury or death.

19
5. Command information / Control panel
Active Bike
Ignition switch (A), to turn the display on/o,
insert key into the ignition switch and turn the
key to the right.
Function button (B): press button (B) briefly once
to select the desired speed level.
Throttle (C): turn the handle downwards to
accelerate.
Front brake (D): pull the lever to brake
Rear brake (E): pull the lever to brake
Lights: press button (F) once to turn on/o.
Bell: press button (G) once to activate.
Active Sport
Throttle (A): press down to accelerate.
Power button (B): press to switch the item on/o.
Brake lever (C): pull the lever to brake
Speed level change: press the button (B) twice to
select the desired level.
Lights: press the button (B) once to switch them
on/o.
Horn: press the button (D) once to activate it
Argento by Pininfarina KPF
C
DB
A
Operation of direction indicators
(if present)
Throttle (A): press down to accelerate.
Power button (B): Press to switch the item on/o.
Brake lever (C): pull the lever to brake
Speed level change: press the button (B) once to
select the desired level.
Quickly press 3 times in a row to switch from
Km/h to Mph.
Quickly press 4 times in a row to switch from
ODO to TRIP.
Lights: press the button (B) twice to switch them
on/o.
Horn: press the button (D) once to activate it
This manual suits for next models
6
Table of contents
Languages:
Other ARGENTO Scooter manuals