argon audio DAB1 User manual

www.argonaudio.com
Quick start
We care about the Environment
By refraining from inserting a full printed manual with our
Argon Audio products we save more than 20 tons of paper
each year. You can find a full User Manual in PDF format
for this product on; www.argonaudio.com
See back side of this insert for Quick start guide
Safety
Safety Instructions
•Unplug this product from the wall outlet before
cleaning. Do not use this product near water or
moisture. Do not spill liquids on the product. Clean
only with a dry cloth.
•Place the unit on a solid surface.
•Do not put it in a closed bookcase or a cabinet that
may keep air from flowing through its ventilation
openings.
•Do not install near any heat sources, such as
radiators, heat registers, stoves or other appliances
that produce heat.
•Protect the power cord from being walked on or
pinched, particularly at plugs and the point where they
exit from the product.
•During Lightning storms, unplug the product from the
power source or if unused for long periods of time.
This will prevent lightning and power-line surge
damage to the product.
•Do not attempt to service this product yourself.
Opening or removing covers may expose you to
dangerous voltages or other hazards. Please contact
the manufacturer to be referred to an authorized
service center near you.
•Do not overload wall outlets, extension cords, or
integral power circuits as this can result in a risk of fire
or electric shock.
•Never push any object through the product openings,
as this can result in fire, electric shock or damage.
•Use proper power sources. Plug the product into a
proper power source, as described in the operating
instructions or as marked on the product.
If there is a Lightning flash with an arrow head
on the product, it’s intended to alert the User
of the presence of un-insulated “dangerous
voltage” within the product, that might be of
sufficient magnitude to constitute a risk of
electric shock to persons.
If there is an Exclamation point on the
product, it’s intended to alert the User that
there is important operating and maintenance
(servicing) information in the User manual.
If there is a double rectangular symbol on the
product, it means that the product is double
insulated. Earth connection is not required.

www.argonaudio.com
Quick start
Quick start
Start up
1. Extend the Antenna
2. Plug the Power supply into an electric outlet and
into the back of the Radio.
3. The Radio will start searching for DAB stations
automatically. This may take a few minutes and
the progress will be shown in the display.
4. Once finished searching, the Radio will start
playing the first found station.
Basic Operating
1. Stations can be chosen by turning the
“Tuning/Select” knob.
2. Once the prefer station is found press the
“Tuning/Select” knob and the chosen station will
start playing.
3. To store a station on one of the 1-5 preset
buttons, press and hold the wished preset button
for 3 sec., while playing the station that you want
to store.
4. When stored, the display will show “Preset X
saved”
5. To change between the Modes DAB, FM, AUX
and Bluetooth (if your Radio has this function),
press the “Source” button repeatedly until you
reach the preferred Mode.
6. To tune stations in FM Mode press and hold the
“Autotune” button for 3 sec. and the Radio will
scan to the next available station. You can store
FM stations like mentioned in point 3.
7. Bluetooth (only If your product have Bluetooth
function). To pair and connect to a Bluetooth
player device (Tablet, Laptop, Mobile Phone etc),
press the Bluetooth symbol button on the Radio
and the Radio will go into Bluetooth mode.
Activate Bluetooth on your Player device and let it
scan for Bluetooth devices. When the Argon
Audio Radio is found, paired and connect via your
Player, you can start play back immediately. If
your Player asks for a pin code, put in “0000”. For
more Bluetooth operating instructions, look in the
full User manual from www.argonaudio.com
Other Operating functions
Inactive standby
The Radio is default out-of-the-box set to turn off
automatically after 120 minutes without any
manual operation of the Radio. To change this
feature:
1. Access Inactive standby settings by pressing the
Tuning/select (3) button/knob when <Inactive
standby> is shown in the display.
2. To deactivate Inactive standby or to change the
Timeout period turn the Tuning/select (3)
button/knob until you reach your desired setting.
1. Press the Tuning/select (3) button/knob to confirm
your choice.
You can find a full User Manual in PDF format
for this product on; www.argonaudio.com