Argos Home Arlo 3 User manual

Arlo 3 Drawer Wardrobe White-Pine
Dimensions
Length - 78cm
Depth - 53cm
Height - 180cm
Weight - 67kg
Issue 1 - 26/11/18
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline:
0045 7668 8055 or e-mail: order@flexa.dk
Assembly Instructions - Please keep for future reference 8791335

1
Safety and Care Advice
Important – Please read these instructions
fully before starting assembly
• Check you have all the
components and tools listed on
pages 2, 3 and 4.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• During assembly children
should be kept away from the
product due to possible risk of
injury.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close
to its final position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Parts of the assembly will be
easier with 2 people.
• Do not use this item if any
components are missing or
damaged
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could
damage the unit. Only use hand
screwdrivers.
• Dispose of all packaging
carefully and responsibly.
• Assembly to be carried out by
a competent adult only.
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• Regularly check all fastenings
to ensure that they properly
tightened.
• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
• This product is suitable for
children in the age 4-12 years.
Maximum load in each drawer
7 kg.
Care and maintenance

Components - Parts
Please check you have all the parts listed below
2
Plinth front x2
(68.4x5x1.9cm)
5
No. 12-01906841
Top x1
(78.0x53.0x1.6cm)
1
No. 4301-1607803-40
Leg x4
(14x4.3x4.3cm)
6
No. 12-04301401
If you have damaged or missing components,
call the Customer Helpline: 0045 7668 8055
Shelf x2
(74.8x50.2x1.6cm)
3
No. 4301-1607486-40
Plinth side x2
(43.4x5.0x1.9cm)
4
No. 12-01904341
Drawer side Right x3
(48.8x16.7x1.3cm)
11 Drawer side Left x3
(48.8x16.7x1.3cm)
12
No. 15-01304881 No. 15-01304882
Drawer back x3
(71.6x16.7x1.3cm)
Drawer front x3
(74.4x18.5x1.6cm)
9
No. 15-01307161 No. 4301-1607445-40
8
Drawer base x3
(72.8x48.3x0.3cm)
10
No. 4309-0307282
Hanging rail x1
(74.1x2.2x1.5cm)
7
No. 3946-0741-2
Base x1
(78.0x53.0x1.6cm)
2
No. 4301-1607804-40

3
Door x2
(105.8x37x1.6cm)
No. 4301-1610581-40
13
Side panel Right x1
(162.8x52.6x1.6cm)
15 Side panel Left x1
(162.8x52.6x1.6cm)
16
Back panel x1
(164.7x76.6x0.3cm)
14
No. 4301-1616281-40 No. 4301-1616282-40
No. 4309-0316471
Components - Parts
Please check you have all the parts listed below
If you have damaged or missing components,
call the Customer Helpline: 0045 7668 8055

Please check you have all the fittings listed below
7x34mm for ø5 Minifix bolt x36
A
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
ø15x9.5mm Minifix cam x36
B
E
C
D
Components - Fittings
F
1.6x16mm Nail square x48
No. 4022-004
I
K
H
M N
3.5x35mm Chipboard screw x12
J
G
8x30mm Dowel x36 5x30 mm Dowel x16
Ø26 mm Cup hinge x6 Mounting plate x6
438x27x10mm Drawer slide x6
Overbalance protector x2
Hanging rail fitting x2
No. 3901-35035
No. 3930-08030 No. 3930-05030
No. 4015-007 No. 4015-008
No. 4010-028
No. 41-00179
No. 4038-003-2
L
Tools required
Phillips
screwdriver
(medium)
Allen key
6mm incl.
Flatblade
screwdriver
(medium)
Small
hammer
Ruler/tape
measure
Eye protection
(when using a
hammer or glue)
No. 4033-010
P
O
R
3.0x12mm Chipboard screw x4
No. 3901-30012
3.5x15mm Chipboard screw x12
ø5.8x11mm Euro screw x18
Magnetic catch x2
No. 3901-35015
No. 3907-58011
No. 4012-012
Door bumper x2
No. 4026-022
Counter plate x2
Q
No. 4012-010
S
Ø9.5/M4x9mm Machine screw x6
No. 3912-04009
4
No. 3933-15010No. 4020-005
4.0x60mm Chipboard screw x14
No. 3901-40060
T
M6/Ø12x20mm Threaded bush x8
No. 4028-021
U
Ø7x45mm Connecting bolt x8
No. 4020-022
V W
No. 3917-08009
M8x8,5mm Grub screw x8Ø14x14,5mm Threaded bush x8
No. 3933-14015

Assembly Instructions
Step 1
Screw the threaded
bushes Tinto the leg 6
using 6mm allen key so
that they are flush with
the leg.
Screw the connecting
bolts Uinto the threaded
bushes T.
Repeat for 4 legs.
Insert the dowels Ginto
the holes in the plinth
fronts 5and the plinth
sides 4.
It may be necessary
to tap the dowels in
very gently with a small
hammer.
Assemble the plinth.
Push threaded bushes
Vinto the holes in the
plinth fronts 5and the
plinth sides 4.
Attach the plinth fronts
5and the plinth sides
4to the legs 6by
placing the dowels into
the holes in legs 6and
connecting bolts into
the holes in the plinth
fronts 5and the plinth
sides 4.
Fasten the legs 6
and the plinth fronts
5and the plinth sides
4by tightening the
grub screws Win the
threaded bushes V.
Don’t overtighten.
5
T
6
T
U
T
UU
GG G GG
GG
G
G
5
45
4
5
5
5
4
4
4
6
V
W
6
6
6
6
V
W
NB!
Step 2
Step 3

Assembly Instructions
Step 4
Attach the assembled
plinth to the base 2with
the chipboard screws C.
NB! Align the holes in
plinth sides 4with the
small holes in base 2.
Attach minifix bolts A
to the top 1and to the
base 2.
Attach magnetic catches
Pto the top 1.
It may be necessary to
tap the magnetic catches
Pin very gently with
small hammer.
Insert the dowels Ginto
the holes in the shelfs
3.
It may be necessary
to tap the dowels in
very gently with a small
hammer.
6
C
2
4
4
C
6 HOLES UP!
G
A
Step 5
Step 6
2
1
3
3
A
A
G
G
G
G
A
A
C
CC
P
P

Step 7
Insert the dowels Hto
the holes in the side
panels 15 and 16 .
Attach minifix bolts Ato
the side panels 15 and
16 .
Attach the hanging rail
fittings Nto the side
panels 15 and 16 with
screws D.
Attach the hinge
mounting plates Oto the
side panels 15 and 16 .
Attach the drawer
runners Rto the side
panels 15 and 16 with
euro screws L.
Be aware of the front
edge!
7
Assembly Instructions
BACK
FRONT
16
A
D
N
H
OL
R
15
15
H
N
O
H
H
H
16
O
O
O
O
O
N
A
A
A
A
A
A
A
A
A
A
A
A
D
D
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
R
R
R
HH
H H
H
H
H
H
HH
H
H
Front edge
Front edge
Front edge
Front edge
L
L L
R
R
NB! 3rd hole

Assembly Instructions
Step 8
Attach the side panels
15 and 16 to the shelfs
3with the minifix cams
B.
Be aware of the front
edges!
Attach the top 1and
the base 2to the side
panels 15 and 16 with
the minifix cams B.
Be aware of the front
edges!
8
B
B
16
3
B
1
3
3
16
15
2
Front edge
Step 9
B
16
1
16
15
Front edge

F
Assembly Instructions
Step 10
Attach the back panel 14
with nails Fto the back
side of the wardrobe.
Nail the back panel 14 to
the carcass around the
edge ensuring that there
are NO GAPS between
the top 1and the back
panel 14 . Follow the
measurements.
Nail the back panel 14
to the bottom shelf 3.
Follow the measurement
606 mm from the
underside of the base 2
Be careful.
Attach the hinges M
to both doors 13 using
screws I.
Step 11
F
I
I
I
I
I
I
M
M
M
M
M
M
14
13
13
M
I
9
60 mm
60 mm
60 mm
60 mm
606 mm
606 mm
2
2
3