Argos Home 6179674 User manual

Simple Assembly Instructions - Please keep for future reference
IMPORTANT
1. Read these instructions carefully and
familiarise yourself with the procedure
before assembling the unit.
2. Check that you have all the component
parts following the list on the back
cover and familiarise yourself with
each part before proceeding.
3. Take all the fittings out of the plastic bag
and separate them into their groups.
4. Ensure you have enough space to lay out
all the parts before assembly.
Curved PC Trolley
Components
5. To avoid scratching it is recommended
that you assemble the unit on a soft
level surface.
3-05
Fittings
K2 x Castor
J
N
O
P
Q
L
M
A17 x Screw
4 x Plastic
Plug
2 x Front
Castor
1 x Left Outside Track
1 x Left Inside Track
1 x Right Outside Track
1 x Right Inside Track
4 x Shelf
Support
A1 x Left Side Panel B1 x Right Side Panel 1 x Drawer
C
D1 x Table Top F1 x Shelf
G1 x Back Support
H1 x Cross Shelf I1 x Centre Support
E1 x Bottom Panel
B4 x Locking Pin D4 x Locking Nuts
C10 x Screw
E6 x Dowel F16 x Screw

Assembly Instructions Assembly Instructions
Stage 2 – Fitting the Side PanelsStage 1 – Fitting the Centre Support
fig. 1
fig. 2
There are many different
kinds of Screws and
Panels. Ensure you check all
before assembly.
Check Before Assembly
NOTE: It would be useful to ask
someone to help you at this
stage.
1. Use Dowels Eto fix the Cross
Shelf H on the Centre Support I. 
See fig. 1.
2. Use Screws Ato fix the Back
Support G on the unit.
See fig. 2.
1. Use Screws Cto fix the Left
Outside Track N on the Left Side
Panel A. Then use the same
method to fix the Right Outside
Track P onto the Right Side
Panel B. 
See fig. 3.
NOTE: The front part of the Track
should be close to the edge of
the panel.
NOTE: It would be useful to ask
someone to help you at this
stage.
2. Use Screws Aand Dowels Eto
fix the Right Side Panel B onto
the unit. Then use Screws Ato
fix the Left Side Panel A onto the
unit. 
See fig. 4.
fig. 3
C
A
N
fig. 4
I
E
H
A
G
E
B
A
A
A
G

Assembly Instructions Assembly Instructions
Stage 4 – Fitting the Table TopStage 3 – Fitting the Bottom Panel
2. Place Shelf Supports L into the
unit.
See fig. 7.
fig. 5
fig. 6
fig. 7
fig. 8
1. Use Locking Nuts D to fix the
Table Top D onto the unit.
See fig. 7.
NOTE: It would be useful to ask
someone to help you at this
stage.
NOTE: Adjust the shelf supports
to the desired height.
3. Slide Shelf F into the unit.
See fig. 8.
NOTE: It would be useful to ask
someone to help you at this
stage.
1. Use Screws A to fix the Bottom
Panel E onto the unit.
See fig. 5.
2. Insert Dowels Eand screw in
Locking Pins Binto the Table
Top D.
See fig. 6.
4. Use Plastic Plugs M to cover the
Screws.
See fig. 8.
A
E
AB
D
B
E
E
B
D
D
L
F
M

Assembly Instructions Assembly Instructions
Stage 6 – Finishing the UnitStage 5 – Fitting the Castors
2. Carefully place the unit in the
desired location.
See fig. 12.
fig. 9
Front
fig. 10
fig. 11
fig. 12
NOTE: It would be useful to ask
someone to help you at this
stage.
NOTE: It would be useful to ask
someone to help you at this
stage.
1. Use Screws Fto fix the Front
Castor J and Castor K onto the
unit.
See fig. 9 .
2. Use Screws Cto fix the Left
Inside Track O and Right Inside
Track Q onto the Drawer C.
See fig. 10.
1. Carefully tilt then slide the finished
Drawer C into the unit.
See fig. 11.
NOTE: The Front Castors J feature
a locking arm. We recommend
you lock the castors when you
have finally positioned the unit
in place.
Care and Maintenance
Safety
To avoid any risk of suffocation to animals or children dispose of the plastic
bags immediately.
Fitting
From time to time please ensure there are no loose screws on the product.
Cleaning
As with all surfaces clean with a damp cloth and mild detergent, do not use bleach
or abrasive products.
K
F
K
J
C
O
Q
C
C
C