Argos Home Penton TV Unit 609/7093 User manual

Penton - TV Unit
609/7093
Assembly Instructions - Please keep for future reference
Issue 1 - 17/10/12
609/7103
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400 800
Important –Please read these instructions fully before starting assembly
Dimensions
Width - 85cm
Depth - 40cm
Height - 57cm

Safety and Care Advice
Important – Please read these instructions fully before starting assembly
Note: If required the next page
can be cut out and used as
reference throughout the
assembly. Keep this page with
these instructions for future
reference.
1
Check you have all the
components and tools listed on
pages 2 and 3.
Remove all fittings from the
plastic bags and separate them
into their groups.
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough
space to layout the parts before
starting.
Do not stand or put weight on
the product, this could cause
damage.
Assemble the item as close
to its final position (in the same
room) as possible.
Assemble on a soft level
surface to avoid damaging the
unit or your floor.
We do not
recommend the
use of power
drill/drivers
as this could damage the unit.
Only use hand screwdrivers.
Parts of the assembly will be
easier with 2 people.
Dispose of all packaging
carefully and responsibly.
for
inserting screws,
This product has been produced
from natural timber; you may
notice some variation in the grain
and colour of different component
parts which is normal for furniture
produced using natural wood and
is not the result of any
manufacturing fault.
The product has been treated
with a wax and oil finish to
prevent dirt ingress and preserve
moisture.
On unpacking the
furniture you may notice an
odour due to this treatment;
this will disappear once the
furniture is unpacked and
assembled after a period of time.
This process may leave some
staining on the packaging
material; please take care to
ensure this does not transfer
to clothing or carpeted surfaces
during assembly.
Care and maintenance
Use an appropriate furniture
polish for natural wood
furniture and a dry cloth to
clean the product.
Avoid placing the furniture in
direct sunlight as this will cause
the timber to prematurely age.
From time to time check
that there are no loose
screws on this unit.
This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre.

Components - Panels
Please check you have all the panels listed below
2
1Top panel (85 x 40cm)
2Base panel (79.4 x 28.4cm)
19 Block x 4
(10 x 2cm)
underside
3Right side panel (55 x 30cm)
Top
Top
4Left side panel (55 x 30cm)
5Right front frame (55 x 9.2cm)
6Left front frame (55 x 9.2cm)
7Back panel (81.2 x 27cm)
8Top front frame (68.6 x 6.5cm)
9Bottom front frame x 2
(68.6 x 6.5cm)
10 Cross rail (79.4 x 6.5cm)
11 Drawer front x 2
(28.4 x 14cm)
12 Drawer sides x 4
(25 x 14cm)
13 Drawer back x 2
(26 x 14cm)
14 Drawer bottom x 2
(27 x 23.6cm)
15 Side drawer
runner x 2 (28.4 x 8cm)
16 Middle drawer
runner (26.4 x 8cm)
17 Vertical frame
(18.8 x 6.5cm)
18 Back column
(22 x 6.5cm)

3
Please check you have all the fittings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases more
fittings may be supplied than are required.
A B C
Wooden dowel x 34
Ruler - Use this ruler to help correctly identify the screws
0510 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170
Tools required
Phillips screwdriver
(small & medium)
Eye protection
(when using a
hammer or glue)
Small
hammer
Ruler/tape
measure
2m
Components - Fittings If you have damaged or missing components,
call the Customer Helpline: 08456 400 800
D
35mm Screw x 32
14mm Screw x 2 30mm Screw x 16
E
22mm Bolt x 4
F
Drawer
handle x 2
G
Nail x 16

Step 2
Fixing left front frame
to the left side panel
.
(Two people required for
an easier assembly)
a: Position left front
frame to the left side
panel through joints.
4
Note:
Before fixing the
blocks into
place it is important to
ensure that the slot and
groove of parts and
are fully pushed together
and lined up correctly at
the top and bottom.
D
c:
.
Fix through blocks
into front frame using
screws
b: Place blocks in the
to the side panel using
screws .
positions shown. First fix
Step 1
Fixing right front frame
to the right side panel
.
(Two people required for
an easier assembly)
a: Position right front
frame to the right side
panel through joints.
Note:
Before fixing the
blocks into
place it is important to
ensure that the slot and
groove of parts and
are fully pushed together
and lined up correctly at
the top and bottom.
D
19
c:
.
Fix through blocks
into front frame using
screws
3
b: Place blocks in the
to the side panel using
screws .
positions shown. First fix
5
5
D
a: b: c:
a: b: c:
6
64
D
Assembly Instructions
4
19
19
19
19
19
D
19 D
3
Yes!No!
5
50mm
100mm
100mm
250mm
50mm
Top
19 5
319
D
19 D
4
Yes!No!
6
50mm
100mm
100mm
250mm
50mm
Top
19
6
4
19
3

Step 3
Step 4
Insert dowels into the
indicated parts.
A
Assembly Instructions
5
A
A
A
A
A
A
AA
34
10
2
15
16
18
2x A
D
a:
b:
15
Fixing side drawer
runner on right side
panel.
a: Fit side drawer runner
first in the front frame
then after in the side
panel as shown.
b:
using screw .
Attach side drawer
runner
Repeat step 4 for the
left side panel and side
drawer runner.
15
D
15
3
D

Assembly Instructions
6
Step 5
Step 6
Assembling parts.
Put parts and
together as shown in the
diagram.
9 17
917
9
Step 7
Insert the assembled
frame and top front frame
into the holes on left
side panel .
4
8
4
8
Fixing base panel.
Fit base panel to the
left side panel then fix it
using screws .
Note:
The hole position
on the base panel.
2
D
Note: The
hole position.
2
D
D
2
Note: The
hole position.

Assembly Instructions
7
Step 8
16
Step 9
Step 10
Fixing middle drawer
runner.
Fit middle drawer runner
to the vertical frame
then fix using screw .
Attention:
Make sure middle
drawer runner is
positioned as shown in
the diagram prior to
fixing.
D
16
Attention:
16
D
Fixing back column.
Fit back column to
the base panel and
middle drawer runner
then fix it using screws
.
Correct position of
the back column. Longer
s
Attention:
ide of back column
(11cm)must be facing to
base panel.
2
16
18
D2
18
16
Attention
18 D
D
Base panel
Back
column
11cm
10
Fixing cross rail.
Fit cross rail to the left
side panel and back
column then fix it
using screws .
18
10
4
D
4
18
10 4
D
10
18
D
11cm
D
D
D
D

Assembly Instructions
8
Step 11
Step 12
Step 13
Fixing right side panel.
Place right side panel
properly ensuring dowels
and front frames are all
fitted into their holes at
the same time.
Fix base panel and
cross rail to the side
using screws .
a:
3
10
D
2
33
9
B
B
D
B
B
D
210
10
2
Fixing top.
Caution:
Attention:
Carefully lay the
top panel on a soft and
clean surface to avoid
damaging the product.
With help, f
then fix
using screws .
Do not over
tighten screws.
it cabinet to
the top panel 1
D
Fixing back panels.
MUST
Important:
Cabinet be
‘square’ when back
panels are attached.
Attach the back panel
using nails .
With help, carefully
stand the product upright.
1
D
D
7
G
G
7
G
D
b: Fix bottom front frame
to the right and left
side panels using screws
as shown in the
diagram.
a:
b:
Note:
Correct position
of the panels.
1

Assembly Instructions
9
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400 800
Step 14
Step 15
a: b:
c: d:
13
d: Using bolts attach
the drawer handle to
the drawer front.
Repeat step 14 for the
other drawer.
Drawer assembly.
a: Attach drawer sides
to the drawer front
using screws .
b: Slide drawer bottom
into slots on drawer sides
and position drawer back
in place.
c: Holding the drawer
back , press the drawer
sides and fix them using
screws .
Insert drawers into unit.
With the back of the
drawers past the front
frames, use a hammer to
tap dowels in flush to
drawer sides. This is a
safety catch to stop
drawer falling out.
Assembly is complete.
A
14
F
A A
11
12
12
C
C
C
C
E
12
11 C
13
13
C
E
F