Arista ADM-5821AX User manual
ADM-5821AX
This manual is a user guide for ADM-5821AX industrial waterproof touch screen display.
It includes detailed description about how to install and operate the product. Arista
Corporation recommends users to read through the entire manual and follow instructions to
avoid any kind of obscurity in using the product. For any questions or support, please call
us at 1.877.827.4782 Monday through Friday 8:00am to 5:00PM Pacic Time.
Industrial Waterproof Touch Screen Display
USER MANUAL
Talk to us. We listen.
2
Product safety precautions
Important: Read all the contents of this instruction manual carefully before
using the ADM-5821AX industrial waterproof display.
Read this document before installation,configuration and operation of this equipment.
Users are required to familiarize with all the information and applicable standards prior to
using this manual. This manual should be saved for future reference and use.
• Relative humidity: 25%~80%
• Storage temperature: -20oC to 60oC(-4F to 140F)
• Operation temperature: 0~50oC(32F to 122F)
• Unplug the unit when not in use for an extended period of time.
• Consult a service technician if the ADM-5821AX waterproof industrial display does
not operate normally when you have followed the instructions in this manual.
• Do not attempt to repair this product yourself. Always get a qualified service
technician to carry out adjustments or repairs.
• Do not place heavy objects on the unit.
• Alwaysusethepowercordsuppliedwiththisunit.Foranyreasonadierentpower
cordisused,itshouldbecertiedbylocalandnationalstandardsandusedunder
guidance of authorized technician.
• Never use a faulty power cord with this unit. Please contact the manufacturer or
nearest authorized repair service right away for a replacement if damaged power
cord is received.
• The power supply cord is used as the main disconnect device. Ensure that the socket
outlet is easily accessible after installation.
• Overloaded AC outlets, extension cords, frayed power cords, and broken plugs are
extremelydangerous.Theymay,andcan,resultinanelectricalshockorrehazard.
Call an authorized service technician for any replacements.
• Hands must be dry when plugging the power cord into an AC outlet to prevent
electrical shock. Do not damage the power cord by disassembling, bending, pulling
orexposingittoheatasitmaycauseareorelectricalshock.
• Make sure to completely insert the power plug into an AC outlet. Insecure
connectionscancausere.
• Ensure that the power source is grounded correctly.
• Always unplug the unit while cleaning; unit can be wiped with a dry or slightly damp
cloth.
3
Contents
Product safety precautions ................................................................................................2
Contents...............................................................................................................................3
Chapter 1 Welcome .........................................................................................................4
Introduction......................................................................................................................................4
Features............................................................................................................................................5
Product specifications...................................................................................................................6
Unpacking ........................................................................................................................................7
Chapter 2 Basics.................................................................................................................8
Product Overview.......................................................................................................8
Physical dimensions ....................................................................................................................11
Chapter 3 Connections ...................................................................................................14
Mounting the ARD-1007TX HDMI extender..............................................................................15
Mounting the display.....................................................................................................................17
Connecting to ARD-1007TX HDMI extender..............................................................................25
Connecting to ARD-5816TX digital extender cluster.................................................................26
Chapter 4 Appendix.........................................................................................................28
Maintenance and Troubleshooting ..............................................................................................28
Product Limited Warranty............................................................................................................30
Frequently Asked Questions........................................................................................................35
Disposal and Recycling Information.........................................................................................36
Disclaimer and Copyright Notice................................................................................................36
Contents
4
Chapter 1 Welcome
Arista Corporation's ADM-5821AX 21.5" industrial waterproof LCD display is designed
to operate in harsh environments. Ideal for a wide variety of industrial environments,
applications and outdoor use.
The ADM-5821AX is integrated with KVM extender receiver in the unit. Therefore, Arista's
KVM extender transmitter has to be used with ADM-5821AX. Arista ARD-1007TX is
compatible with ADM-5821AX and is shipped with ADM-5821AX. Beside ARD-1007TX;
ARD-5816TX extender cluster is also compatible with ADM-5821AX.
The high resolution display is capable of displaying large amounts of critical production and
process information, and provides floor personnel with easy-to-see and read production
targets, cadence, alarms, machine uptime and downtime measurements, with OEE (overall
equipmenteectiveness).
With one CAT5e/6 LAN cable, the industrial waterproof LCD display system allow video
signals extension up to 495ft. Arista ARD-1007TX HDMI digital extender transmitter or
Arista ARD-5816TX 16-Way Digital Extender Transmitter Cluster is situated near the signal
source, and the ADM-5821AX display can be placed at a preferred location.
Introduction
5
s
• 21.5” industrial waterproof
display, 1920 x 1080 resolution
• 16:9 aspect ratio for the display with touch support.
• LCD protected by tempered glass.
• High quality, waterproof stainless steel bezel.
• Supports multiple digital signals such
as audio, video(HDMI, VGA, DVI, SDI, DP, CVBS,
YPbPr).
• HDBaseT 5Play extends audio, video, control, Ethernet, and power over a single Cat5e/
Cat6 cable.
• HDBaseT provides 10.2 Gbps of bandwidth on all channels.
• Color supports up to 8 bits per color, total 16.7 million colors.
• Extends uncompressed HDMI video signal up to 330ft (100m) at 4K (UHD 3840 x 2160)
resolution, and 1080P video signal up to 495ft.
• Supports the touch screen, and keyboard/mouse signal transmission.
• Strengthenedprotectiveglass(anti-reectiveoptional).
• Sunlight readable option.
• High brightness,contrast and wide viewing angles.
• Single control operation and transparent On-Screen-Display (OSD) user interface. Full
control of all relevant display and interface parameters via OSD.
• Multiple mounting options(
Wall/ VESA/ Benchtop Stand/ Pedestal Mounting)
for better
stability.
• Meets IP-67 requirements.
Features
6
Product specications
LCD Display
Display Size 21.5"
Max Resolution 1920 x 1080
Backlight Lifetime 50,000 hours
Visual Characteristics
Colors 16.7 million
Aspect Ratio 16:9
Viewing Angle (V/H) 178° / 178°
Response Time 14 ms
Pixel Pitch (mm) 0.248 x 0.248
Contrast Ratio 1000 : 1
Brightness 250 nits
Touchscreen
Technology Projected Capacitive
Touch Rating 50 Million Touches
Interface Remote In
Driver Windows 7 & up
Technical info.
Extension signal type
Supports Video(HDMIVGA, DVI, SDI, DP,
CVBS,YPbPr),
Audio, Touch Control, keyboard/mouse, Ethernet, Power.
Video bandwith 350MHz
Transmission cable Cat5e/Cat6/Cat7 cable
Transmission distance Supports 4K/60Hz and 2K/60Hz video signal up to 330ft,
1080P video signal up to 495ft
Physical information
Mounting
Wall/ VESA/ Benchtop Stand/ Pedestal Mounting
Physical Dimension
(Lx W x D)
Display: 21.15 x 12.98 x 3.69 inch /537.2 x 329.8 x 93.7 mm
HDMI Extender: 6.19 x 4.04 x 1.45 inch/ 157 x 103 x 37
mm (L x W x H)
Environmental information
Operating temperature 0~35°C (32~95°F)
Storage temperature -20~60OC [-4~140F]
Relative humidity 10% to 95% (non-condensing)
IP/NEMA Rating IP-67
7
ADM-5821AX waterprrof display x1 ARD-1007TX HDMI Extender x1
Unpacking
Waterproof CAT5e/6 LAN Cable x1
Before unpacking, please inspect the shipping carton for any external damage.
Please contact for assistance if any damage is visible. Keep original packaging
material safe in case of any return, repair or transport to other location.
6 feet RS-232 cable x1
AC/DC power adapter x1 AC power cable x1
6 feet HDMI cable x1
6 feet USB cable x1
8
Product Overview
Front View
Rear View
Chapter 2 Basics
Side View
1
RJ45 LAN port - For network connection, connect to network device.
2
USB1/USB2 Port - Connect mouse or keyboard for control of Remote PC on ADM-
5821AX display.
3
Remote IN port - Connect video extender transmitter(ARD-1007TX or ARD-5816TX)
for transmitting all signals via CAT5e/6 LAN cable.
1
2
3
ADM-5821AX Display
9
ARD-1007TX HDMI Extender Transmitter
7 8 9
1 2 3 4 5 6 10
Rear
Front
No. Connector Description
1 RS-232 IN RS-232 signal source input(Touch signal input).
2 HDMI IN HDMI video signal source input.
3 USB
Connect to a PC via USB cable(for inputting touch/keyboard/mouse
signal
etc.)
4 IR Remote control(In/Out) Connect to a Remote control connector terminal for remote
control on the display.
5 Service For debugging use
6 LED indicators
Power indicator: Lights in green- the unit is powered on.
Link indicator: Lights in green-the network connection works
well.
7 48V DC IN
48V DC power input
8 HDMI Loop OUT HDMI video signal output to display.
9 Local OUT Connect remote device for transmitting all signals via CAT5e/6
LAN cable.
10 LAN1_HUB_LAN2 For network connection, connect to network device.
10
Front View
Rear View
2
11
1
1
3
4
5
11 1 11111A B C DEFGH
1. LED Indicators 4. Power button
2. USB Service connector 5. AC power input jack
3.
Remote control IR connector
A, B, C, D, E, F, G, H. Extender Transmitter channels - Input and output connectors
for16channels(16-Way)ofdierentsignaltransmission.
ARD-5816TX
16-Way Digital Extender Cluster
(Optional)
11
Physical dimension
265.1mm
10.44"
93.7mm
3.69"
78.7mm
3.10"
532.0mm
20.94"
537.2mm
21.15"
431.0mm
16.97"
1500
329.8mm
12.98" 207.4mm
8.17"
ADM-5821AX Display
The diagrams below show the physical and specific dimensions of the ADM-5821AX
industrial waterproof touch screen display.
12
5.12
"
5.65
"
2.76
"
70mm
144mm
34mm
130mm
157mm
6.19
"
103mm
4.04
"
1.35
"
ARD-1007TX HDMI Extender
13
ARD-5816TX Digital Extender Cluster
Front View
Bottom View
466.0mm
18.33"
133.5mm
5.26"
4 x R.09
2.25"
222.2mm
8.75"
442.0mm
17.40"
262.2mm
10.32"
482.0mm
18.98"
14
Connectors are located on the side of ADM-5821AX waterproof industrial display
Connectors are located at the front and rear of ARD-1007TX HDMI Extender
Warning! Make sure your display is grounded at all times. Also make sure
that it is on the same ground as any other equipment connected to its
communications ports.
Connectors
Connectors
Connectors
Chapter 3 Connections
This section describes the connections/connectors available on the ADM-5821AX industrial
LCD display.
Rear
Front
15
Mounting the ARD-1007TX HDMI Extender
It is very important to place the unit in a suitable environment. Make sure the
area is well ventilated, out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
1. Wall mounting
There are two methods available to install the ARD-1007TX HDMI digital extender: Wall
mounting and DIN-rail
mounting.
1. Wall mounting
The extender can be placed on a shelf, table, or mounted onto a wall or board. To mount
them onto a wall or board, you will require the mounting screws found in the accessory box.
Please follow the steps shown in the diagram below:
Step1. Situate the ARD-1007TX HDMI digital extender on a board or a wall. Firmly secure
it by screwing it in with the four “#8-32UNC” sized screws.
Step2. Make sure that the ARD-1007TX HDMI extender is correctly and securely seated
onto the board or wall.
Wall or board
Screws
16
2. DIN-Rail mounting
As shown in the figure below, please follow the steps to mount the ARD-1007TX HDMI
digital extender via DIN-Rail.
• Step 1: The two metal clasps are pre-installed on the back of ARD-1007TX HDMI digital
Extender, place one Din-Rail on the wall or board, and use a screwdriver to tighten the
screwstoaxtheDin-Railontothewallorboard.
• Step 2: Snap the metal clasp by the built-in iron loop spring on the Din-rail to mount the
ARD-1007TX HDMI digital Extender onto the wall or board.
• Step 3: You can also slide ARD-1007TX around the Din-rail to move it to a desired
position.
• To remove the ARD-1007 Extender from Din-rail, press the iron loop spring built-in the
metal clasp on the rail to loose it, then remove the ARD-1007 from the rail.
metal clasp
Din-Rail
Screws
17
Mounting the display
1. VESA Mounting
“VESA FDMI Standard” stands for Video Electronics Standards Association Flat Display
Mounting Interface Standard. The ADM-5821AX waterproof industrial display needs to be
mounted on a VESA-compliant arm or bracket. ADM-5800AX Series have holes pre-drilled
on the back of it.
As shown in the gure below, please follow these steps to mount the display.
• Step 1: Place the metal mounting plate on the back of the ADM-5821AX display, and
align holes on the mounting plate with the holes on display.
• Step 2: Use screwdriver to tighten six “#8-32UNC” sized screws to fix the metal
mounting plate on the display.
• Step 3: Place the metal board on the VESA bracket, and tightly bolt four screws to the
VESA bracket and metal board.
• Step 4: Place VESA bracket with the metal board on wall or board, align holes on the
VESA bracket with holes on the wall or board.
• Step 5: Use screwdriver to tighten screws to fix the VESA bracket on the wall or
board.
• Step 6: Mount the display onto the wall or board through the metal mounting plate and
VESA bracket. Ensure that the display is properly and securely situated onto the wall
or board.
This section outlines how to mount the ADM-5821AX waterproof industrial display. There
are five methods available: VESA Mounting, Wall Mounting, Benchtop Stand Mounting,
Pedestal Mounting and Ceiling Mounting. Users may choose any of the five mounting
methods to suit their needs.
Mounting
plate
Step1
Step2
Step3
Step4 Step5
Step6
Metal
board
VESA
Bracket
Wall or board
Screws
18
Physical dimensions for VESA mounting
265.1mm
10.44"
93.7mm
3.69"
78.7mm
3.10"
532.0mm
20.94"
537.2mm
21.15"
431.0mm
16.97"
1500
329.8mm
12.98" 207.4mm
8.17"
19
I2. Wall mounting
As shown in the gure below, please follow these steps to mount the display.
• Step 1: Place the metal mounting plate on back of the ADM-5821AX waterproof
industrial display, align holes on the mounting plate with holes on the display.
• Step 2: Use a screwdriver to tighten six “#8-32UNC” sized screws to fix the metal
mounting plate on the display.
• Step 3: Place the VESA bracket on the wall or board, and align holes on the VESA
bracket with holes on the wall or board.
• Step 4: UseascrewdrivertotightenscrewstoxtheVESAbracketontothewallor
board.
• Step 5: Mount the display onto the wall or board through the mounting plate and VESA
bracket. Visually inspect the display to be sure that it is properly and securely situated
onto the wall or board.
Screws
Mounting
plate
VESA
bracket
Wall or board
20
Physical dimensions for Wall mounting
265.1mm
10.44"
93.7mm
3.69"
78.7mm
3.10"
532.0mm
20.94"
537.2mm
21.15"
431.0mm
16.97"
1500
329.8mm
12.98" 207.4mm
8.17"
Table of contents
Other Arista Touch Panel manuals
