Aristel DKP61B User manual

Redial
Last number Redial: Press redial.
Caller number redial: Search the correct Caller ID
number on display, press redial.
Auto Retry of Busy number: Off Hook, press DSS
button + save or On Hook, press save, the system
will automatically retry the same number.
Release Calls
1.With Handset: Replace handset.
2.Handsfree: Press spk.
3.Flash Function: During external call dialing press
trf/fl to terminate call and retain the same CO line.
DSS CO LED will remain ON.
Speed Dial
1. System Speed Dial (This function should be
programmed on the console stations. These numbers
can be accessed by any handset):
Programming: Press func + spd+ 1. Enter a 3-digit
100 ~ 699 (depending on programming) and 0+ 0.
Enter telephone number, and press save.
Operation: Press spd and select Speed Dial Code
100 ~ 699 (depending on programming).
2 Personal Speed Dial:
Programming: Press func + spd +2.and DSS button
DSS1~DSS8 or dial Speed Dial Number 0~9 and
telephone number + save.
Operation: Press spd and select DSS1~DSS8 or dial
Speed Dial Number 0~9 (as programmed).
Volume/Frequency Control (Dynamic Control)
Ringing Volume Level: During Ringing, press ▲/ ▼
button to adjust Volume Level.
Speaker Volume Level: During hearing audio from
Speaker, press ▲/ ▼button to adjust Volume
Level.
Handset Volume Level: During hearing audio from Handset,
press ▲/ ▼button to adjust Volume Level.
Volume/Frequency Control (Static Control)
Press func + 8+ code (refer code 1 ~ 4 below), use
indicators on Volume ▲/ ▼to adjust volume level or
ringing frequency and then press save.
1 = Ringing Volume Level Selection (1~8 levels)
2 = Speaker Volume Level Selection (1~8 levels)
3 = Handset Volume Level Selection (1~8 levels)
4 = Ringing Frequency Selection (1~9 levels)
Part No. 82S7OMINS3
Edited in March 2010
Quick Reference User Guide
Answering Calls
Lift handset or spk on handsfree models.
Call Forward
From own station (handset on Hook):· Press fwd
button or func + 2+ Call Forward Code +
Destination Station number. To cancel, press func + 2
+ 1+ own Station number.
Call Forward Code:
1 = Call Forward All,
2 = Call Forward Busy,
3 = Call Forward No answer,
4= Call Forward Busy and No Answer
5 = Call Follow me.
6 = Call Forward External
7 = CFWD to Vmail,
8 = System wide ON /OFF
Call Transfer
Unannounced Transfer: Lift handset, press hold, dial
transferred station number, press trf/fl, then replace
handset.
Announced Transfer: Lift handset, press hold, dial transferred
B
B
Bu
u
us
s
si
i
in
n
ne
e
es
s
ss
s
s T
T
Te
e
el
l
le
e
ep
p
ph
h
ho
o
on
n
ne
e
e S
S
Sy
y
ys
s
st
t
te
e
em
m
ms
s
s
K
K
Ke
e
ey
y
yp
p
ph
h
ho
o
on
n
ne
e
e
M
M
Mo
o
od
d
de
e
el
l
l:
:
: D
D
DK
K
KP
P
P6
6
61
1
1B
B
B/
/
/6
6
63
3
3B
B
B

station number, wait for answer, then press trf/fl and
replace handset.
Conference Calls
Lift handset, dial Party A, place Party Aon hold, Dial Party B.
When answered, press conf.
Note: Not applicable to DV-22 system.
Do Not Disturb
Press dnd to enable or disable.
Note: dnd LED will flash when Do Not Disturb is enabled.
Door Phone
Call Door Phone:
(1) Press spk + #+ 6+ 1(for Door Phone 1) or
spk + #+ 6+ 2(for Door Phone 2).
(2) Press door button on DSS panel to talk to Door
1.
Door Lock Release: When on door Phone call,
press 0to release Door Lock.
Note: When door button remains ON, it means the door was not
closed.
Force Account Code(s)
Press fac button or func + 1, then on entry of account
number, system will automatically access a free CO line.
Hold Call
Normal Call Hold: Lift handset and answer call, press
hold button and replace handset. To retrieve the
CO line on hold, press hold or the DSS button oh
hold.
Exclusive Call Hold: Lift handset and answer call, press
hold button twice and replace handset. To retrieve the
CO line on hold, press hold or the DSS button oh hold.
Individual Alarm / Morning Call
On Console Stations: Press func + 9+ 9, and HH :
MM 01 + save.
On Common Stations: Press func + 9, and HH : MM
01 + save.
To cancel Individual alarm: Set HH : MM 01 = 00 : 00 01
Intercom Call
Normal Call: Lift handset or spk, dial station number
or DSS button.
Call Operator: Lift handset or spk, dial 0or 9to call
operator.
Lock / Unlock Your Telephone
1. Lock/Unlock: Press func + 3, key in security
number (for programming function Zone 248). When
programmed, press save.
2. Temporary Unlock: Press func + 4, key in security
number. This will provide CO access for one call.
Message Lamp ON
Call an internal station which is engaged or not answer,
press DSS button assigned for mw button. Once the called
station presses the mw button and recall to the station
which leaves the message, these 2 stations can talk each
other.
Night Lamp Function
Press spk + #+ 8670 + spk to enable or disable Lamp
indicator on handset.
Outgoing Call
1. Off Hook: Lift handset, press 0or 9(depending on
programming) and dial required telephone number.
2. On Hook: Press 0or 9; or press spk + 0or 9and
dial required telephone number.
3. CO Access through DSS: Handset on/off hook.
Press any defined CO DSS button, and dial
required telephone number.
4. Press #+ Line Representative Codes, and dial
required telephone number.
Outgoing Calls Search
Off Hook and press OUT and 6/ ▲to scroll forward or 3/
▼to scroll backwards. Press redial to make this number
call. Press 4to delete this number.
Paging
General Paging: Lift handset, press #+ Paging Code.
Paging Codes:
0 = all Internal and External Zone Paging.
1 = All Internal Zone Paging.
2 = 2 + Internal Zone 1 ~ 8
3 = 3 + External Zone 1 ~ 8
9 = All External Zone Paging
Quick Paging: Lift handset, and press page on handset
Pick Up
1. All Groups: Lift handset + *+ 0or press pick up.
2.Own Group: Lift handset + *+1or press pick up.
3.Defined Groups: Lift handset + *+ 2+ Group Code.
4.Defined Station: Lift handset + *+ 3+ Defined
Station.
5.Defined CO Lines: Lift handset + *+ 4+ Line
Representative Codes.
Smart Phone