ARRI Claypaky Arolla Aqua User manual

CL3027
INSTRUCTION MANUAL
ENGLISH
AROLLA AQUA
INDEX
Page Contents
2 1. Safety information
3 2. Unpacking and preparation
4 3. Installation and start-up
43.1 Installing the fixture
4 3.2 Connecting to the mains supply
5 3.3 Connecting the signal control line: DMX / Art-Net
5 3.4 Switching on the fixture and basic setup
7 4. Maintenance
74.1 Opening the covers
84.2 Periodical cleaning
9 4.3 Effect module removal
12 4.4 Rotating gobos
14 4.5 Battery removal
15 5. Dimensions
Congratulations on choosing a Claypaky product!
We thank you for your custom.
Please note that this product, as all the others in the
rich Claypaky range, has been designed and made with
total quality to ensure excellent performance and best
meet your expectations and requirements.

2
AROLLA AQUA
EN
IT
DE
ES
FR
RU
SAFETY INFORMATION
IMPORTANT: Claypaky recommend you to carefully read and keep the safety information on this product, also
available in digital format at the following link:
www.claypaky.com
Ref: [FIS02M - Safety Information Arolla Aqua]
INFORMAZIONI DI SICUREZZA
IMPORTANTE: Claypaky raccomanda di leggere accuratamente e conservare le informazioni di sicurezza relative
a questo prodotto, sempre reperibili in versione digitale al seguente link:
www.claypaky.com
Rif: [FIS02M - Safety Information Arolla Aqua]
INFORMATIONEN ZUR SICHERHEIT
WICHTIG: Claypaky empfiehlt, die Sicherheitsinformationen bezüglich dieses Produkts genau zu lesen und
aufzubewahren. Sie sind in Digitalversion immer unter folgendem Link auffindbar:
www.claypaky.com
Ref: [FIS02M - Safety Information Arolla Aqua]
INFORMACIONES DE SEGURIDAD
IMPORTANTE: Claypaky recomienda leer detenidamente y conservar la información de seguridad relativa a este
producto. Además, está disponible una versión digital de la misma en el siguiente enlace:
www.claypaky.com
Ref: [FIS02M - Safety Information Arolla Aqua]
CONSIGNES DE SÉCURITÉ
IMPORTANT: Claypaky recommande de lire attentivement et de conserver les informations de sécurité relatives à
ce produit, disponibles en version digitale au lien suivant:
www.claypaky.com
Réf. : [FIS02M - Safety Information Arolla Aqua]
ИНСТРУКЦИЮ ПО ТЕХНИКЕ БЕЗОПАСНОСТИ
ВАЖНО: Claypaky рекомендует внимательно прочитать и сохранить инструкцию по технике безопасности
данного изделия, которая всегда доступна в электронном формате по следующей ссылке:
www.claypaky.com
Наименование: [FIS02M - Safety Information Arolla Aqua]
1. SAFETY INFORMATION

3
AROLLA AQUA
1
90°
90°
90°
90°
UNLOCKED
LOCKED
PAN Mechanism Lock and Release (every 90°) -Fig. 2
TILT Mechanism Lock and Release (every 45°) -Fig. 3
2 3
Packing contents - Fig. 1
45°
45°
45°
45°
45°
45°
45°
LOCKED
UNLOCKED
2. UNPACKING AND PREPARATION
Omega bracket
IP 65 connector
Wi-fi receiver

4
AROLLA AQUA
4
LCD Display Functional buttons
EthernetDMX THRU Power inDMX IN Battery fuse Power outIP valve
5
2
1
1
2
3
6
Connecting and disconnecting power cable - Fig. 6
Installing the projector - Fig. 4
The projector can be installed on the floor resting on special rubber feet, on a tr<uss or on the ceiling or wall.
WARNING: with the exception of when the projector is positioned on the floor, the safety cable must be fitted. (Cod. 105041/003 available on request).
This must be securely fixed to the support structure of the projector and then connected to the fixing points of the base.
3. INSTALLATION AND START-UP
3.1 Installing the fixture
Light collimation system
This product contains internal light collimation system.
Avoid intense light from any angle.
3.2 Connecting to the mains supply
Control panel - Fig. 5

5
AROLLA AQUA
Switching on the projector - Fig. 9
Plug the power connector. The projector starts resetting the effects. At the same time, the following information scrolls on the display:
Model Firmware
AROLLA Version X.X.X Dmx Address xxx
AQUA Date - Hour
On conclusion of resetting in case of absence of the dmx signal, Pan and Tilt move to the “Home” position (Pan 128 bit - Tilt 128 bit). The control
panel (Fig. 8) has a display and buttons for the complete programming and management of the projector menu. The display can be in one of two
conditions: rest status and setting status. When it is in the rest status, the display shows the projector’s DMX address.
During menu setting status, after a wait time (about 30 seconds) without any key having been pressed, the display automatically returns to rest status.
It should be noted than when this condition occurs, any possible value that has been modified but not yet confirmed with the
F
key will be cancelled.
1
Dmx Address
Warning Message
9
Connecting to the control signal line (DMX) - Fig. 8
Use a cable compliant to the EIA RS-485 specifications: 2-pole twisted, shielded, 120Ohm characteristic impedance, 22-24 AWG, low capacity. Do not use
microphone cables or other cables with characteristics differing from those specified. The end connections must be made using XLR type 5-pin male/female
connectors. A terminating plug must be inserted into the last projector with a resistance of 120Ohm (minimum 1/4 W) between terminals 2 and 3.
IMPORTANT: The wires must not make contact with each other or with the metal casing of the connectors. The casing itself must be connected to the
shield braid and to pin 1 of the connectors.
Connecting to the mains supply - Fig. 7
SIGNAL
SCREEN
DMX 512
5 PIN
1
2
3
4
5
SIGNAL
Mains
7
8
Continue ‘
3.3 Connecting the signal control line: DMX / Art-Net
3.4 Switching on the fixture and basic setup

AROLLA AQUA
6
28
82
Reversal of the display - Fig. 10
To activate this function, press UP
B
and DOWN
C
keys simultaneously while the display is in the rest mode. This status will be memorised and
maintained even for the next time it will be switched on. To return to the initial state, repeat the operation all over again.
Setting the projector starting address
On each projector, the starting address must be set for the control signal (addresses from 1 to 512).
The address can also be set with the projector switched off.
IMPORTANT: If there is no DMX input signal the address displayed blinks.
10
Functions of the buttons - Using the menu
Setting addresses and options with the projector disconnected
The projector DMX address, as well as other possible operating options, can also be set when the appliance is disconnected from the electricity supply.
All that is needed is to press
RIGHT
E
to momentarily activate the display and thus access the settings. Once the required operations have been
carried out, the display will switch off again after a wait time of 30 seconds.
USING THE MENU:
1) Press LEFT
D
once – “Main Menu” appears on the display.
2) Use the UP
B
and DOWN
C
keys to select the menu to be used:
• Setup (Setup Menu): To set the setting options.
• Option (Option Menu): To set the operating options
• Information (Information Menu): To read the counters, software version and other information.
• Manual Control (Manual control Menu): To trigger the test and manual control functions.
• Test (Test Menu): To check the proper functioning of effects
• Advanced (Advanced Menu): Access to the "Advanced menu" is recommended for trained technical personnel.
3) Press
F
to display the first item in the selected menu.
4) Use the UP
B
and DOWN
C
keys to select the MENU items.
Confirms the displayed value, or activates the displayed function, or enters the successive
menu.
Decreases the value displayed (with auto-repetitions) or passes to the next item in the menu.
Increases the value displayed (with auto-repetitions) or passes to the previous item in a menu.
Return to the top level
Enters the successive menu.
F
DOWN
UP
LEFT
RIGHT

7
AROLLA AQUA
WARNING
- IP66 fixture
- Failure to completely remove power from fixture prior to servicing can lead to serious injury or death.
For additonal service information please contact [email protected]
IMPORTANT
To maintain IP66 rating each cover has rubber gasket on it. If any rubber gasket is lost or damaged, it must be replaced by an original equipment
(OE) part. We also suggest to replace the rubber sleeve gasket every 2 years.
4
1
2
1
2
3
11 12
Continue ‘
4. MAINTENANCE
4.1 Opening the covers

Lower Side
Upper Side
8
AROLLA AQUA
13
Periodical cleaning - Fig. 13
To ensure optimal operation and performance for a long time it is essential to periodically clean the parts subject to dust and grease deposits. The
frequency with which the following operations are to be carried out depends on various factors, such as the amount of the effects and the quality of the
working environment (air humidity, presence of dust, salinity, etc.).
Use a soft cloth dampened with any detergent liquid for cleaning glass to remove the dirt from the reflectors, from the lenses and filters. It is recommended
that the projector undergoes an annual service by a qualified technician for special maintenance involving at least the following operations:
•General cleaning of internal parts.
•Restoring lubrication of all parts subject to friction, using lubricants specifically supplied by Claypaky.
•General visual check of the internal components, cabling, mechanical parts, etc.
•Electrical, photometric and functional checks; eventual repairs.
NOTE: keep a careful cleaning of the ''CMY/colour filters assembly'' to prevent rapid deterioration.
4.2 Periodical cleaning

9
AROLLA AQUA
Continue ‘
4.3 Effect module removal
2
1
Extraction of the effect modules - Fig. 14.
IMPORTANT: Grasp the modules using the support structure and not the details which could get damaged.
Insertion of the effect modules: Repeat the operations indicated in Fig. 14, 15 and 16 in reverse order.
NOTE:
- Do not disconnect wiring harnesses when the fixture is switched on, to avoid to damage electronic boards.
- Do not switch on the fixture with wiring harness disconnected.
14

10
AROLLA AQUA
1
2
Extraction of the effect modules - Fig. 15.
IMPORTANT: Grasp the modules using the support structure and not the details which could get damaged.
Insertion of the effect modules: Repeat the operations indicated in Fig. 14, 15 and 16 in reverse order.
NOTE:
- Do not disconnect wiring harnesses when the fixture is switched on, to avoid to damage electronic boards.
- Do not switch on the fixture with wiring harness disconnected.
15

11
AROLLA AQUA
1
2
Extraction of the effect modules - Fig. 16.
IMPORTANT: Grasp the modules using the support structure and not the details which could get damaged.
Insertion of the effect modules: Repeat the operations indicated in Fig. 14, 15 and 16 in reverse order.
NOTE:
- Do not disconnect wiring harnesses when the fixture is switched on, to avoid to damage electronic boards.
- Do not switch on the fixture with wiring harness disconnected.
16
Continue ‘

3
2
1
12
AROLLA AQUA
Gobo orientation - Fig. 18
The picture shows the correct gobos orientation.
Gobo holder replacement - Fig. 17
18
4.4 - Rotating gobos
17
To determine which side of a godo is coated, hold an odject up to it. On the
uncoated side, there is a space between the object and its reflection.
COATED GLASS GOBOS TYPE 1 COATED GLASS GOBOS TYPE 2
Grey/Black side
away from light source
Coated side towards
light source
Coated side
Uncoated side
Uncoated side
Reflective side towards light source

13
AROLLA AQUA
1.1
ø26.95 ±0.2
ø20.5
3rd
2nd
5th 4th
8th 1st
7th
6th
Static gobo - Fig. 20
- Original gobos have a special coating designed specifically to resist to high temperatures;
- IMPORTANT: Do not use metal gobos.
- For any additional information please contact Claypaky service center.
20
1.1
ø26.95 ±0.2
ø20.5 ±0.2
INDEX
1st
2nd
3rd
4th
5th
6th
7th
Replacing rotating gobos - Fig. 19
- Original gobos have a special coating designed specifically to resist to high temperatures;
- IMPORTANT The rotating gobo wheel only uses dichroic glass gobos. Do not use metal gobos.
- For any additional information please contact Claypaky service center.
19
Continue ‘

14
AROLLA AQUA
Battery removal - Fig. 21
This product contains a rechargeable battery. To preserve the environment, please dispose the battery at the end of its life according to the
regulation in force.
1
2
4
3
21
4.5 Battery removal

15
AROLLA AQUA
5. DIMENSIONS
325
(12.80")
430
(16.93")
743
(29.25")
593
(23.35")
578
(22.76")
539
(21.22")
450
(17.72")
Cause and solution of problems
THE PROJECTOR WILL NOT SWITCH ON
PROBLEMS
ELECTRONICS NON-OPERATIONAL
DEFECTIVE PROJECTION
REDUCED LUMINOSITY
POSSIBLE CAUSES CHECKS AND REMEDIES
No mains supply.
LED source exhausted or defective.
Signal transmission cable faulty or disconnected.
Incorrect addressing.
Fault in the electronic circuits.
Lenses broken
Dust or grease deposited.
Check the power supply voltage.
Replace the LED source. (See instructions).
Replace the cables.
Check addresses (see instructions).
Call an authorized technician.
Call an authorized technician.
Clean (see instructions).

IST02X – EN - Rev.0 09/2023
www.claypaky.com – Service support & Helpdesk: https://e-assist.tech