ARRI MINI-B AQUA CL3026 User manual

1
IN TRUCTION MANUAL
ENGLI H
INDEX
Page Contents
2 1. afety information
3 2. Unpacking and preparation
4 3. Installation and start-up
4 3.1 Installing the fixture
5 3.2 Connecting to manis supply
5 3.3 Connecting the control signal line: DMX / Art- et
5 3.4 Switching on the fixture and basic setup
7 4. Maintenance
7 4.1 Maintenance and Caution
8 4.2 Battery removal
9 4.3 Opening the covers
10 5. Dimensions
11 6. Cause and solution of problems
CL3026
Congratulations on choosing a Claypaky product!
We thank you for your custom.
Please note that this product, as all the others in the
rich Claypaky range, has been designed and made with
total quality to ensure excellent performance and best
meet your expectations and requirements.
MINI-B AQUA

2
Mini-B Aqua
EN
IT
DE
E
FR
RU
AFETY INFORMATION
IMPORTA T: Claypaky recommends you carefully read and keep the safety information on this product, also
available in digital format at the following link:
www.claypaky.com
Ref: [FIS02L - Safety information Mini-B Aqua]
INFORMAZIONI DI ICUREZZA
IMPORTA TE: Claypaky raccomanda di leggere accuratamente e conservare le informazioni di sicurezza relative
a questo prodotto, sempre reperibili in versione digitale al seguente link:
www.claypaky.com
Rif: [FIS02L - Safety information Mini-B Aqua]
INFORMATIONEN ZUR ICHERHEIT
WICHTIG: Claypaky empfiehlt, die Sicherheitsinformationen bezüglich dieses Produkts genau zu lesen und
aufzubewahren. Sie sind in Digitalversion immer unter folgendem Link auffindbar:
www.claypaky.com
Ref: [FIS02L - Safety information Mini-B Aqua]
INFORMACIONE DE EGURIDAD
IMPORTA TE: Claypaky recomienda leer detenidamente y conservar la información de seguridad relativa a este
producto. Además, está disponible una versión digital de la misma en el siguiente enlace:
www.claypaky.com
Ref: [FIS02L - Safety information Mini-B Aqua]
CON IGNE DE ÉCURITÉ
IMPORTA T: Claypaky recommande de lire attentivement et de conserver les informations de sécurité relatives à
ce produit, disponibles en version digitale au lien suivant:
www.claypaky.com
Réf. : [FIS02L - Safety information Mini-B Aqua]
ИНСТРУКЦИЮ ПО ТЕХНИКЕ БЕЗОПАСНОСТИ
ВАЖНО: Claypaky рекоменд ет внимательно прочитать и сохранить инстр кцию по технике безопасности
данного изделия, которая всегда дост пна в электронном формате по след ющей ссылке:
www.claypaky.com
Наименование: [FIS02L - Safety information Mini-B Aqua]
1. AFETY INFORMATION

3
Mini-B Aqua
Packing contents - Fig. 1
1
2. UNPACKING AND PREPARATION

4
Mini-B Aqua
2
3. IN TALLATION AND TART-UP
Installing the projector - Fig. 2
The projector can be installed on the floor on a truss or on the ceiling or wall.
WARNING: with the exception of when the projector is positioned on the floor, the safety cable m st be fitted. (Cod. 105015/802 available on req est).
This m st be sec rely fixed to the s pport str ct re of the projector and then connected to the fixing point. .
3.1 Installing the fixture
IP66 valve
Display User buttons Power IN Ethernet
DMX IN
(5 pin)
DMX THRU
(5 pin)
Power IN
3
Control panel - Fig. 3

5
Mini-B Aqua
Connecting to the control signal line (DMX) - Fig. 5
Use a cable conforming to specifications EIA RS-485: 2-pole twisted, shielded, 120Ohm characteristic impedance, 22-24 AWG, low capacity. Do not use
microphone cable or other cable with characteristics differing from those specified. The end connections must be made using XLR type 5 pin male/female
connectors. A terminating plug must be inserted into the last projector with a resistance of 120Ohm (minimum 1/4 W) between terminals 2 and 3.
IMPORTANT: The wires must not make contact with each other or with the metal casing of the connectors. The casing itself must be connected to the
shield braid and to pin 1 of the connectors.
SIGNAL
SCREEN
DMX 512
5 PIN
1
2
3
4
5
SIGNAL
Ethernet
5
Connecting to the mains supply - Fig. 4
Mains
4
Continue ‘
3.3 Connecting the control signal line: DMX / Art-Net
3.2 Connecting to manis supply
witching on the projector - Fig. 6
Plug the power connector. The projector starts resetting the effects. At the same time, the following information scrolls on the display:
Model Firmware Dmx Address xxx
Mini-B Aqua Version X.X.X
Date - Hour
On conclusion of resetting in case of absence of the dmx signal, Pan and Tilt move to the “Home” position (Pan 128 bit - Tilt 128 bit). The control
panel (Fig. 8) has a display and buttons for the complete programming and management of the projector menu. The display can be in one of two
conditions: rest status and setting status. When it is in the rest status, the display shows the projector’s DMX address.
During menu setting status, after a wait time (about 30 seconds) without any key having been pressed, the display automatically returns to rest status.
It should be noted than when this condition occurs, any possible value that has been modified but not yet confirmed with the
F
key will be cancelled.
1
Dmx Address
Warning Message
6
3.4 witching on the fixture and basic setup

6
Mini-B Aqua
28
28
Reversal of the display - Fig. 7
To activate this function, press UP
B
and DOW
C
keys simultaneously while the display is in the rest mode. This status will be memorised and
maintained even for the next time it will be switched on. To return to the initial state, repeat the operation all over again.
etting the projector starting address
On each projector, the starting address must be set for the control signal (addresses from 1 to 512).
The address can also be set with the projector switched off.
IMPORTANT: If there is no DMX input signal the address displayed blinks.
7
Functions of the buttons - Using the menu
etting addresses and options with the projector disconnected
The projector DMX address, as well as other possible operating options, can also be set when the appliance is disconnected from the electricity supply.
All that is needed is to press E TER to momentarily activate the display and thus access the settings. Once the required operations have been carried
out, the display will switch off again after a wait time of 30 seconds.
U ING THE MENU:
1) Press MODE once – “Main Menu” appears on the display.
2) Use the UP
B
and DOW
C
keys to select the menu to be used:
• Setup (Setup Menu): To set the setting options.
• Option (Option Menu): To set the operating options
• Information (Information Menu): To read the counters, software version and other information.
• Manual Control (Manual control Menu): To trigger the test and manual control functions.
• Test (Test Menu): To check the proper functioning of effects
• Advanced (Advanced Menu): Access to the "Advanced menu" is recommended for trained technical personnel.
3) Press
F
to display the first item in the selected menu.
4) Use the UP
B
and DOW
C
keys to select the ME U items.
Confirms the displayed value, or activates the displayed function,
or enters the successive menu.
Decreases the value displayed (with auto-repetitions) or passes to the next item in the menu.
Increases the value displayed (with auto-repetitions) or passes to the previous item in a menu.
Return to the top level.
Enters the successive menu.
F
C
DOW
B
UP
MODE
E TER

7
Mini-B Aqua
WARNING
- IP 66 fixture
- Failure to completely remove power from fixture prior to servicing can lead to serious injury or death.
For additonal service information please contact [email protected]
IMPORTANT
The screws to be removed have rubber sleeve gaskets at the threaded end of the screw. DO OT LOOSE these. They must be reinstalled when
reassembly is done. If these rubber sleeve gaskets are damaged, they must be replaced with exact original equipment (OE) parts, we also suggest to
replace the rubber sleeve gasket every 2 years.
To mantain IP66 rating each covers have rubber gasket on it, If any rubber gasket is lost or damaged, they must be replaced by an original equipment
(OE) parts, we also suggest to replace the rubber sleeve gasket every 2 years.
CAUTION:
• It is recommended not to use compressed air with more than 4 atmospheres for cleaning the internal parts of the fixture, led board area.
This is to avoid damaging electronic components.
•To ensure optimal operation and performance for a long time it is essential to periodically clean the parts subject to dust and grease deposits. The
frequency with which the following operations are to be carried out depends on various factors, such as the amount of the effects and the quality of
the working environment (air humidity, presence of dust, salinity, etc.).
It is recommended that the projector undergoes an annual service by a qualified technician for special maintenance involving at least the following operations:
- General cleaning of internal parts.
- Restoring lubrication of all parts subject to friction, using lubricants specifically supplied by Claypaky.
- General visual check of the internal components, cabling, mechanical parts, etc.
- Electrical, photometric and functional checks; eventual repairs.
Cleaning the lenses
Only use neutral soap and water to clean the lenses, then dry it carefully with a soft, non-abrasive cloth. (WAR I G: the use of alcohol or any other
detergent could damage the lenses).
Continue ‘
8
Periodical cleaning
Periodical cleaning
4. MAINTENANCE
4.1 Maintenance and Caution
Light collimation system
This product contains internal light
collimation system. Avoid intense
light from any angle.

8
Mini-B Aqua
Battery removal - Fig. 9
This product contains a rechargeable battery. To preserve the environment, please dispose the battery at the end of its life according to the
regulation in force.
9
4.2 Battery removal

9
Mini-B Aqua
2
1
4
3
10
Opening the covers - Fig. 10
4.3 Opening the covers

194
(7.64")
331
(13.03")
413
(16.26")
250
(9.84")
225
(8.86")
280
(11.02")
415
(16.34")
Mini-B Aqua
5. DIMEN ION
10
Mini-B Aqua

11
Mini-B Aqua
THE PROJECTOR WILL OT SWITCH O
PROBLEMS
ELECTRO ICS O -OPERATIO AL
DEFECTIVE PROJECTIO
REDUCED LUMI OSITY
POSSIBLE CAUSES CHECKS AND REMEDIES
o mains supply.
LED exhausted or defective.
Signal transmission cable faulty or disconnected.
Incorrect addressing.
Fault in the electronic circuits.
Lenses broken
Dust or grease deposited.
Check the power supply voltage.
Call an authorised technician.
Replace the cables.
Check addresses (see instructions).
Call an authorised technician.
Call an authorised technician.
Clean (see instructions).
6. CAU E AND OLUTION OF PROBLEM

www.claypaky.com – Service support & Helpdesk: https://e-assist.tech
IST02V – E - Rev.0 02/2023