Arrow International Nevada Gold Classic Instruction sheet

NEVADA GOLD TOPPER ASSEMBLY
FIELD INSTALL INSTRUCTIONS
TO BEGIN INSTALLATION
Center the topper assembly on the Nevada Gold Classic
or Nevada Gold II machine. The topper is held on by two
large magnets as shown below.
The cables need to be secured on the back of the base.
The cables may be secured to either side of the back of
the topper base.
The power adapter has a 6 ft cord to the topper and then
a 6 ft cord to the wall outlet.
OR
Arrow International, Inc. has made every effort to ensure that this user’s manual is accurate.
Information in this user’s manual is subject to change without notice.
Please visit the Arrow International website for the latest user manual updates.
https://equipment.arrowinternational.com/support#manuals

HH4895V7000-MNL
© ARROW INTERNATIONAL INC.
CHANGING ARTWORK
There is one small screw that helps
secure the black magnetic piece to the
front of the topper.
This screw is to be removed if the
artwork is ever to be changed.
COLOR PROGRAMING
Tap this button to cycle through the LED sequence options.
Effective only when the middle button LED is ON which is the
default setting. There are 9 sequences that can be selected to
run. If the middle button LED switched to OFF, all 9 sequences
run continuously.
The topper stores its configuration when power is removed.
To access the panel you must remove the two screws at the top
of the topper.