Artforma LED Hexagon Mirror Parts list manual

1
Instruction / installation
manual of
LED Hexagon Mirror

2
Thank you that you decided to buy our product. We made all our
products taking care of each detail and we subject them to
multiple tests. We are convinced that you made a purchase that
will serve you for a long time.
Read the instructions carefully before proceeding with the installation. Failure to
follow the instructions may result in the refusal to accept the complaint.
NECESSARY TOOLS
A pencil
A measuring tape or a ruler
A level
A wall plug (included)
L-bolts (montage hooks included)
You will also need one person for help
A drill bit (6 mm)
A drill and a screwdriver

SECURITY
3
Warning, glass!
Place the mirror only on a soft surface. Frame corners are
particularly susceptible to mechanical damage.
Do not hang the mirror on movable elements of the interior
equipment.
Do not stick the mirror to the wall with mounting tape.
Make sure the surface on which you want to hang the product
will withstand the load on the mirror.
The wall on which you hang the mirror should be at least 10 cm
thick and made of durable material (e.g. concrete,
brick, reinforced concrete, etc.)
If you want to hang a mirror on a plasterboard wall (cardboard
plaster), use the wall plugs intended for
walls of this type (Molly pins). They are not
included in the mounting kit.
Good Wrong

4
Content:
1.
2.
3.
4.
First, open the package. Remember not to place the mirror on a hard surface as
this may damage the product.
Check if the package contains all the elements (product received according to the
order, assembly elements).
Then take the mirror out of the packaging and place it on a soft surface (you can
use a folded towel for this).
Make sure the product does not have any scratches or damage. Pay particular
attention to the corners, check them first by removing the protections. If necessary,
contact us, do not install the item with possible damage.
1. Mounting hook "L" 2 pcs.
PREPARATION FOR MONTAGE

Instruction for mounting on the wall
1. In order to determine the place for mounting on the wall, measure the distance
between two handles attached to the mirror.
2. Use these measurements to mark two points on the
wall that will serve you to drill
holes.
5

6
Instruction for mounting on the wall
3. Make sure that the distances between handles on the mirror and points marked on the wall
are the same.
7.
8.
Put both wall plugs in the holes.
Then screw the "L" hooks into the wall plugs.
9. To ensure that the mirror is firmly attached, make sure the "L" hooks are properly screwed
in.
4.
5.
6.
Check whether there is no installation in
places that were determined to make
holes there.
If there is any installation in the wall,
choose another place for the mount.
Once you determine mounting places on
the wall, drill holes there.

7
Instruction for mountin one the wall
10. Hang the mirror on the "L" mounting hooks.
Use the element marked in red to adjust the distance between the shelf and the wall.
Use the element marked in yellow to adjust the height of the holder (up / down).

8
GUIDELINES RELATING TO
CLEANING AND
MAINTENANCE
If blurs remain on the glass after removing the protective film, use the included
glue remover. You can eliminate any streaks with a glass cleaner.
Use only agents intended for cleaning of glass surfaces and a dry microfibre cloth
for everyday maintenance of the mirror.
Avoid cleaning glass with silicone ore acidic agents. Cleaning agents of such kind
may damage surface of the glass and induce its corrosion in the future.

FORAM Sp. z o.o. sp. k.
Karpicko, ul. Jeziorna 3, 64-200 Wolsztyn
Mail EU: [email protected]
Mail PL: [email protected]
[phone]
We are at your disposal from Monday to Friday from 9am to 3pm.