Artforma LED-illuminated mirror with an aluminium... User manual

1
installation manual
,,of LED-illuminated mirror
with an aluminium housing”

2
Thank you that you decided to buy our product. We made all our
products taking care of each detail and we subject them to multiple
tests. We are convinced that you made a purchase that will serve
you for a long time.
Read the manual carefully before proceeding to assembly.
You will find some tips making the assembly much easier therein.
NECESSARY TOOLS
A pencil
A measuring tape or a ruler
A level
A wall plug of 8 mm (included)
Bolts (assembly hooks - included)
You may also need help of another
person.
A drill and a screwdriver
A drill bit of 8 mm

SAFETY
3
Read the manual carefully before proceeding to assembly.
You will find some tips making the assembly much easier therein.
Warning glass!
Watch out for the corners of the housing that are particularly
exposed to a mechanical damage.
Crumbling!
Depending on the size of the mirror, it may be heavy.
It is recommended to have the wall installation executed by
two persons.
High tension!
The electrical installation should be connected by an electri-
cian.

PREPARATION FOR INSTALLATION
4
1.
2.
3.
4.
5.
Do not place the mirror on a hard surface, since it can
cause a damage to the product.
Open the packing first. Do not place the mirror
on a hard surface, since it can cause a damage to the product.
Then, take out the mirror from the packing and put it on a soft surface (you can use
e.g. a folded towel for this purpose).
Check whether the packing contains all components.
Remove the protective corners from the mirror.
Make sure that the product does not bear any traces of scratches or damage. If
necessary, contact
Good Wrong
Do not suspend the mirror on pieces of furniture.
Do not suspend the mirror on the ceiling.

INSTRUCTION FOR MOUNTING ON THE WALL
5
1.
2.
3.
4.
In order to determine the mounting place on the wall, measure the distance
between two holes for holders mounted on the housing.
Using the measurements, mark two points on the wall that will serve you to drill
holes.
Make sure that the distances between the holder holes and between points marked
on the wall are the same.
Check whether there are no pipes or electric wires in the places where the holes will
be made.
4

6
7. Put wall plugs in the holes.
5.
6.
If there are pipes or electric wires in the
wall, choose another place to mount
the mirror.
Drill holes in previously marked points
in the wall.
Once you determine mounting places
on the wall, drill holes there.
8. Then screw “L-hooks” in the wall plugs.
However, make sure that hooks are not
tightened too much. Their role is to
ensure an equal position of the mirror
which should be situated about 30 mm
from the wall.
INSTRUCTION FOR MOUNTING ON THE WALL

7
10. Then, suspend the mirror on L-hooks.
9. In order to ensure that the mirror is fixed
stably, check whether L-hooks are moun-
ted correctly in eyelets of the holders.
INSTRUCTION FOR MOUNTING ON THE WALL

12. At the very end,
connect the plug to
the power supply.
11. Once you suspend the mirror, remove the protective film.
Make sure that the power supply is disconnected -
turn off the fuses!
In order to connect the product to the power supply, use
“Wago” terminal blocks. Remember to follow the rules for
work with an electric installation or use help of an electrician.
8
Then, suspend the mirror on L-hooks.
INSTRUCTION FOR MOUNTING ON THE WALL

INSTRUCTION FOR CLEANING
AND MAINTENANCE
9
In order to remove the residues of the protective film from the surface of the mirror, use
a solvent, acetone or nail polish remover.
For daily maintenance of the mirror, use only agents for cleaning of glass surfaces and
a dry microfibre cloth.
Avoid cleaning of the glass with silicone or acid-based agents. Cleaning agents of this
kind may damage the surface of the mirror and cause its corrosion in the future.

Karpicko, ul. Podgórna 16, 64-200 Wolsztyn
Mail EU: [email protected]; Mail PL: [email protected]
[phone]
We work from Monday to Friday from 9:00 AM to 3:00 PM
FORAM Sp. z o.o. sp. k.
NIP 923-172-93-78, REGON 381749814