ArtFox Matrix Hybrid CMY User manual

Matrix Hybrid CMY
350W LED CMY Hybrid Moving Head with CMY color mixing , Beam 4 degrees, 4-36 degrees zoom for
Spot , CMY For Wash,Beam/Spot/Wash, 3 in 1
1

Contents
1 Instruction---------------------------------------------------------------------------------------------2
1.1 Application According to Purpose----------------------------------------------------------------------2
1.2 Indoor use only---------------------------------------------------------------------------- ------------2
1.3 Safety operation----------------------------------------------------------------------------------------2
2 Lamp --------------------------------------------------------------------------------------------------3
3 Supply Voltages, Mains Cord and Connection to Mains------------------------------3
4 Housing -------------------------------------------------------------------------------------------------4
5 Operating Environment---------------------------------------------------------------------------4
6Installation-------------------------------------------------------------------------------------------- 5
7 Operation ------------------------------------------------------------------------------------------- 6
7.1 Controls-------------------------------------------------------------------------------------------- 6
7.2 Menu structure---------------------------------------------------------------------------------------- 6
7.3 Channel----------------------------------------------------------------------------------------------9
8 technical parameters ----------------------------------------------------------------------------11
2

To be on the safe side and under the terms of the security, do not allow to restructure and modify this
product. Please note that because of man-made damage caused by improper use, is beyond the scope
of our warranty.
This equipment pass strict inspection before shipment, please comply with the instruction manual
operation requirements, to ensure the safe operation of the product under normal conditions. Any
damage caused by improper operation, will cause the cessation of the warranty claim. Manufacturer
does not accept any because of improper operation products or non-compliance of the instructions of any
liability for property damage and personal injury.
Please place the manual in safe place for future reference and in products for sale or lease or handling
running new holder.
1. Instruction
1.1Application According to Purpose
⚫ This product is a lighting effect which creates special light effects with one lamp. To generate these
effects, the product must be connected to mains and a DMX-512 compatible controller.
⚫ This product is designed for 110/230V, 50/60Hz operation and exclusively for indoor use.
⚫ If used for any purpose other than described in these operating instructions, the device may suffer
damage and the warranty expires. Also, any other use is linked with risks such as short circuits, fire,
electrical shock, etc.
⚫ The manufacturer's serial number must never be removed as otherwise the warranty expires.
⚫ Safety and Maintenance
1.2 Indoor use only
3

⚫ Make sure the equipment load-bearing structures can withstand the weight of more than 10 times
when above ground installation
⚫ Disconnect with power supply before replacing lamp, fuse or other accessories
⚫ Only operation under electrical standards with leakage protection device A/C
⚫ Cool down for 15 minutes before replacing lamps. Please do not use other company's accessories.
⚫ Contact your specialized dealer for any technical problem
1.3 Safety operation
⚫ Do not operate without outer cover or lenses
⚫ Do not look directly to the light
⚫ Replace immediately when lamp broken
⚫ Do not project directly to items near 0.5M
⚫ Do not operate when temperature up to 40°
2. LDiodes
ATTENTION:
DANGER OF LIFE! RISK OF BURNS!
RISK OF FIRE!
During operation, the lamps will reach temperatures of up to 75°C. Touching the lamps may cause
serious burns! Objects coming into contact with the lamps during and shortly after operation may catch
fire!
3. Supply Voltages, Mains Cord and Connection to Mains
ATTENTION:
DANGER OF LIFE! RISK OF BURNS!
RISK OF FIRE! RISK OF SHORT CIRCUIT!
4

connect the product exclusively to 230 V, 50 Hz A/C!
⚫ Always ensure during installation, operation, transport and when storing the product that the mains
cord is not exposed to possible mechanical damage, or damage caused by humidity, fluids, heat or
cold!
⚫ The product's cable entry must not be exposed to stress from pull! Create the mains connection
once the product has been installed only. Always connect the mains plug last!
⚫ The product must only be connected to a proper outlet of the public supply grid. Connect the mains
cord to suitable outlets only! Use extensions cords in compliance with specifications only! Do not
allow the mains cord to come into contact with other cords!
⚫ Ensure during installation, operation, transport and storage that none of the cables are freely
exposed! Never touch the mains cord, mains plug and outlets with wet or damp hands!
⚫ When not using the product, and prior to cleaning always disconnect the product from mains! To do
so, hold the mains plug by the handling surface and never pull the mains cord!
⚫ Never connect the device to dimmer packs!
4. Housing
ATTENTION:
DANGER OF LIFE! RISK OF BURNS!
RISK OF FIRE! RISK OF SHORT CIRCUIT!
⚫ Always ensure during inst3ll3tion, operation, transport and when storing the product that no shocks
or other forces impact the housing!
⚫ The housing must not touch onto any other devices or objects during operation!
⚫ Easily flammable materials, e.g. decoration material and other surfaces and objects, must maintain
a minimum distance of 3m to the housing! walls must maintain a minimum distance of 50cm to the
housing! The device must be installed on a fireproof surface only (no carpet)! Always ensure a
proper circulation of air.
Do not touch the housing during operation it will heat up. The housing is safe to touch approx. 5
minutes following the end of operation!
The device must never be carried via the projector arms. Use the carrying handles only!
Fluids must not enter the housing as this could reduce the protective insulation and may trigger short
circuits which may lead to fatal electric shocks! If fluids have entered, disconnect the mains plug
immediately 3nd secure the product 3g3inst unintentional operation and contact your specialized dealer!
Damage caused as a result of fluids entering the housing is exempt from warranty.
No metal parts or other items must enter the housing as this may reduce the protective insulation or
trigger short circuits which may lead to fatal electric shocks! If metal parts or other items have entered,
disconnect the mains plug immediately, secure the product against unintentional operation and contact
your specialized dealer! Damage caused by metal parts or other items in the housing is exempt from
warranty.
5. Operating Environment
ATTENTION:
DANGER OF LIFE! RISK OF BURNS!
RISK OF FIRE! RISK OF SHORT
CIRCUIT!
The product must be operated and stored in a dry environment only! Splash water, rain, humidity, fog
may reduce the protective insulation which may lead to fatal electric shocks! The limit value for relative
humidity is 50% at 45 ° C. A minimum distance of 1.5m to a fog machine must be observed; fog
saturation in the room must not reduce the visibility to below 10m.
The product must be operated at a temperature range of between -5 °C and 45 °C only. Protect
the product against direct exposure to sunlight or other heat, such as from radiators! If the product is
taken from a cold environment into a warm environment it must only be taken into operation once it has
reached ambient temperature, since the condensation created by the difference in temperature may
destroy the device!
Protect the product against dust! Dust may reduce the protective insulation, which may cause fatal
5

electric shocks!
The product must be operated at altitudes ranging between 20m below and 3000m above sea level
only!
The product must not be operated during thunder storms; risk of destruction from surge voltages!
The product must be operated at a minimum distance of 12 m to lit objects only!
6.Installation
ATTENTION：
DANGER OF LIFE!
This product can be operated suspended or as a stand-alone system.
Should your lighting effect show any signs of damage, do not install the device! In this case, have
your lighting effect repaired by your specialized dealer. The manufacturer does not accept responsibility
or liability for damage to property or personal injury resulting from an improperly installation!
As a stand-alone system the device must be installed vertically on an absolute planar, firm, fireproof,
shock- and vibration-free surface. The installation of this lighting effect must be carried out by trained and
professional staff! The installation of this lighting must only be carried out with the appropriate materials
The suspended installation of this lighting effect necessitates a suitable suspension system! The
lighting effect must never be fixed swinging freely in the room. No individuals should linger underneath
the lighting effect during suspended installation!
It is a must to install this device with a second independent fixture. Such second fixture must
guarantee in the event of failure of the main fixture that no assembly parts will fall down. Use the fixture
on the under-surface only.
The light effect unit must be attached via two certified hooks and omega bracket to a tie-bar system•
Use the screw threads on the under-surface only.
It must be ensured that an expert inspects the mechanical and safety-relevant installation prior to the
initial operation and following major modifications, prior to the renewed operation. It must be ensured that
an expert inspects the mechanical and safety-relevant installation at least once a year. It must be
ensured that an expert inspects the mechanical installation and the installation of relevance to safety
within the framework of an acceptance test at least every four years.
The installation fixture must be as such that it can withstand fora period of 60 minutes 10 times the
load capacity without harmful deformation.
It is prohibited for any individual to unnecessarily stay or pass beneath the installation during any
type of assembly work.
The light effect unit must be secured by a safety arrested cable if fly-mounted. The cable must
withstand 12 times the weight of the light effect unit. Use arrester cables equipped with quick closing links.
The dropping distance must not exceed 20 cm. Defect arrested cables or arrested cables that have
already been exposed to stress must not be used.
7. Operation
ATTENTION：
RISK OF HEALTH!
7.1Controls
Link all DMX devices with a DMX-512 controller by using a standard, 3-pin DMX cable or 5-pin DMX
cables. Connect the output of the first device with the input of the second device and the output of the
second device with the input of the third device and so on.
Connect the mains plug to an outlet.
Connect the mains plug to an outlet.
Operating the product for the first time may generate smoke and odour; this is not a defect. Avoid
dis/connecting the product repeatedly and quickly from/with mains! Always wait 15 minutes prior to the
next dis/connection
6

7.2Menu
⚫ Display
LED BSW Moving
001
Signal: NG
Channel:24CH
Mode: DMX
Temp:25
System error reporting an
error
◼ Signal：Show there is signal or not
◼ Channel：Show current channel
◼ Mode：Show current run mode
◼ Temp：Show current temperature
⚫ First page of menu
001
◼ReturnAdd：中Setup/ENaddressInvert Setup
7

◼ Return：back to display
◼ 中/EN：Press or ENTER to change the language
◼ Invert：For display invert
◼ Setup：Into menu
⚫ Menu structure
Main menu
Sub menu
Parameter
Add
001 - 512
NO
Setup
ESC
NO
Run mode
DMX/Auto 1/Auto 2/Sound
Channel mode
23CH
Fixture ID
0-255
Pan Def Pos
0-255
Tilt Def Pos
0-255
Invert Pan
YES/NO
Invert Tilt
YES/NO
Swap Pan/tilt
YES/NO
P/T speed mode
YES/NO
No signal keep
YES/NO
Linear color
YES/NO
Encoder correct
YES/NO
Hall correct
YES/NO
8

Backlighting time
15S/30S/60S/OFF
Screen brightness
20%-100%
Load default
YES/NO
Adjust
Inset password
Light correct
Test
Corresponding
current
channel
0-255
Reset
Return
YES/NO
Reset Head
YES/NO
Reset XY
YES/NO
Reset All
YES/NO
Info
ESC
Error message
Error message
DMX data
Channel value
Software version
01-01-01
Usage time
7.3 Channel
15

24CH
22CH
Function
DMX Value
Function
1
1
Pan
0～255
X movement 0～540 degree
2
2
Pan fine
0～255
X fine 16bit
3
3
Tilt
0～255
Y movement 0～240 degree
4
4
Tilt fine
0～255
Y fine 16bit
5
XY speed
0～255
From fast to slow
6
5
Dimmer
0～255
From dark to bright
7
6
Strobe
0～3
OFF
4～103
Pulse strobe from slow to fast
104-107
ON
108-155
Flicker gradually from slow to fast
156-207
Flickering from slow to fast
208-212
ON/OFF
213-251
Random strobe from slow to fast
252-255
ON
8
7
Color wheel
0-9
White
10-19
Color 1
20-29
Color 2
30-39
Color 3
40-49
Color 4
50-59
Color 5
60-69
Color 6
70-79
Color 7
80-89
Color 8
90-99
White + Color 1
100-109
Color 1+ Color 2
110-119
Color 2+ Color 3
120-129
Color 3+ Color 4
130-139
Color 4+ Color 5
140-149
Color 5+ Color 6
150-159
Color 6+ Color 7
160-169
Color 7+ Color 8
170-255
Reverse flow from slow to fast
9
8
Cyan
0～255
Cyan linear change
10
9
Magenta
0～255
Magenta linear change
11
10
Yellow
0～255
Yellow linear change
12
11
CTO
0-255
CTO
13
12
Fixed gobo wheel
0～9
Small white
10～14
Gobo1
15～19
Gobo2
20～24
Gobo3
25～29
Gobo4
30～34
Gobo5
35～39
Gobo6
40～44
Gobo7
45～49
Gobo8
50～54
Gobo9
55～59
Gobo10
60～64
Gobo 11
65～74
Gobo 1 shake from slow to fast
75～84
Gobo 2 shake from slow to fast

85～94
Gobo 3 shake from slow to fast
95～104
Gobo 4 shake from slow to fast
105～114
Gobo 5 shake from slow to fast
115～124
Gobo 6 shake from slow to fast
125～134
Gobo 7 shake from slow to fast
135～144
Gobo 8 shake from slow to fast
145～154
Gobo 9 shake from slow to fast
155～164
Gobo 10 shake from slow to fast
165～174
Gobo 11 shake from slow to fast
175～184
Big white shake from slow to fast
185～218
Clockwise water flowing effect of gobo, from fast to
slow
219～221
OFF
222～255
Anti-clockwise water flowing effect of gobo, from
slow to fast
14
13
Rotation gobo
wheel
0
Small white
1～9
Big white
10～19
Gobo1
20～29
Gobo2
30～39
Gobo3
40～49
Gobo4
50～59
Gobo5
60～69
Gobo6
70～79
Gobo7
80～89
White shake
90～99
Gobo1 shake
100～109
Gobo2 shake
110～119
Gobo3 shake
120～129
Gobo4 shake
130～139
Gobo5 shake
140～149
Gobo6 shake
150～159
Gobo7 shake
160～205
Clockwise water flowing effect of gobo, from
fast to slow
206～209
Off
210～255
Anti-clockwise water flowing effect of gobo,
from slow to fast
15
14
Gobo rotation
0～127
Gobo linear rotation
128～189
Clockwise rotation of gobo, from fast to slow
190～193
Without rotation
194～255
Anti-clockwise rotation of gobo, from slow to fast
16
15
Prism 1
0～127
Prism1 out
128～255
Prism1 in
17
16
Prism 1 rotation
0～127
Prism1 rotation
128～187
Prism1 Clockwise rotation (from fast to slow)
188～195
Without rotation
196～255
Prism1 anti-clockwise rotation, flow slow to fast
18
17
Prism 2
0～127
Prism2 out
128～255
Prism2 in
19
18
Prism 2 rotation
0～127
Prism 2 rotation
128～187
Prism 2 clockwise rotation (from fast to
slow)
188～195
Without rotation
196～255
Prism 2 anti-clockwise rotation, flow slow to

Features:
All-in-one fixture with 4–36°zoom range
Get beam, spot, and wash effects from asingle fixture
CMY color mixing enables you to craft an infinite number of colors
Motorized focus, zoom, and
2rotating prisms (1 x6-facet linear and 1x3-facet circular)
2GOBO wheels (1 fixed metal and 1rotating)
350watt LED engine yields enough output for most large venues and event productions
Light Source:
•350W Cool White LED Engine
•50,000 Hour Average LED Life,8,000K
Color:
•Color Wheel: 8+Open （CTO+UV）,half-color and rainbow
effect .CTO (color temperature optional(3200k-8500k)
•Full CMY Color Mixing
GOBOs:
•GOBO Wheel 1: 12 Fixed +Open (1 Beam Reducers Beam Mode)
•GOBO Wheel 2: 7Rotating/Replaceable +Open (Size: 22.8mm; Viewable: 15mm)
16
fast
20
19
Frost
0～127
Frost out
128～255
Frost in
21
20
Focus
0～255
Linear focus 0-100% from far to near
22
21
Zoom
0～255
Linear zoom 0-100% from small to big
23
Reserved
0～255
Reserved function
24
22
Function
100-150
Reset the effect motor over 6 seconds
151-200
Reset the effect motor over 6 seconds
201-255
Reset all over 6 seconds

•Modular design for easy servicing and GOBO replacement
Effects:
•Zoom Range: 4~36-degrees
•CTO: 3200k-8500k
•Focus: Motorized
•Frost effect for wash
•Prism 1: Rotating 3-facet Circular
•Prism 2: Rotating 6-facet Linear Rotating
•Prism Layering
Connections:
•Power Input: Locking Power IN connection
•AC90-240v,
50/60hz .RDM
function
Control:
•Control Channels: 23ch,
•DMX Modes: 23chs, RDM (Remote Device Management)
•Control: 3-pin and 5-pin DMX
17

•Full color display menu
•Pan /Tilt Correction: Automatic
•Pan /Tilt Lock
•Pan /Tilt Range: 540˚ /270˚
•Fine Tilt
•Pan/Tilt Speed: Fast to Slow
•Dimming &Fine Dimming: Electronic
Electrical:
•Input Voltage: 100-240V 50Hz/60Hz (Auto change)
•Power Draw: 400W (3.33A @120V; 1.81A @220V)
Dimensions/Weight:
•Dimensions (LxWxH): 13.5” x15.7” x27.1”/345 x400 x690mm
•Weight: 52.8 lbs. /24kg
18