Artila Matrix-702 Installation instructions

Copyright © Artila Electronics Co., Ltd. All Rights Reserved.
Matrix-702
Linux-Ready Cortex-A5 Industrial
IoT Gateway
Hardware Guide
Version: 1.0
2020 May

Matrix-702 ardware Guide
ARTILA
2
Trademarks
The Artila logo is a registered trademark of Artila Inc. All other trademarks or
registered marks in this manual belong to their respective manufacturers.
Disclaimer
Information in this document is subject to change without notice and does not
represent a commitment on the part of Artila.
Artila provides this document as is, without warranty of any kind, either expressed
or implied, including, but not limited to its particular purpose. Artila reserves the
right to make improvements and/or changes to this manual, or to the products
and/or the programs described in this manual, at any time.
Information provided in this manual is intended to be accurate and reliable.
owever, Artila assumes no responsibility for its use, or for any infringements on
the rights of third parties that may result from its use.
This product might include unintentional technical or typographical errors.
Changes are periodically made to the information herein to correct such errors,
and these changes are incorporated into new editions of the publication.
FCC AND IC INF RMATI N:
This Class A digital apparatus complies with Part 15 of the FCC rules and with
Canadian ICES-003
peration is subject to the following two conditions:
1. This device may not cause interference and
2. This device must accept any interference. Including interference that may
cause undesired operation of the device.

Matrix-702 ardware Guide
ARTILA
3
Document Amendment History
Revision Date Remark
V 1.0 2016 Jun. Initial

Matrix-702 ardware Guide
ARTILA
4
Table of Contents
1. Introduction .................................................................................................... 5
1.1 Features .................................................................................................. 5
1.2 Specifications ( ardware)........................................................................ 5
1.3 Specifications (Software) ......................................................................... 6
1.4 Packing List ............................................................................................. 7
1.5 Optional Accessory.................................................................................. 7
2. Layout ............................................................................................................. 8
2.1 Connector & LED Indicator ...................................................................... 8
2.2 Dimension ............................................................................................... 9
3. Pin Assignment and Definitions .................................................................... 10
3.1 LED Indicators ......................................................................................... 10
3.2 Ethernet LAN Port ................................................................................... 10
3.3 Power Connector ..................................................................................... 11
3.4 Console Port............................................................................................ 11
3.5 miniPCIe Slot........................................................................................... 12
3.6 SIM card Socket ...................................................................................... 12
3.7 SD card Socket ....................................................................................... 13

Matrix-702 ardware Guide
ARTILA
5
1. Introduction
Matrix-702 based on ARM Cortex-A5, is a Linux-ready IoT gateway with highly
integrated and low power consumption and wide-range Temperature operating.
Matrix-702 provides a reliable IoT gateway as a data transmission from wired to
wireless network that easily integrates with a wide range of target markets, such as
industrial control, automation, mobile gateway and other applications.
1.1 Features
 ATMEL ATSAMA5D35 536M z Cortex-A5 Processor
 Linux Kernel 4.19.x and File System
 Support Toolchain: gcc 8.2.0xx + glibc 2.28xx
 512MB LPDDR2 SDRAM
 16GB eMMC Flash and 8MB DataFlash for system backup
 One Gigabit and one 10/100Mbps Ethernet port
 One miniPCIe slot
 One micro-SIM card socket reserved
 Two SMA-type Antenna holes reserved
 One microSD socket
 +9 to +48VDC Power input
 Ultra-low power consumption, less than 1.5Watts
 Wall-mounting, Optional DIN RAIL mounting adaptor
1.2 Specifications (Hardware)
CPU / Memory
• CPU: ATMEL ATSAMA5D35 536M z w/MMU
• SDRAM: 512MB, LPDDR2
• Flash: 16GB, eMMC
• DataFlash: 8MB, for system backup
Network Interface
• Type: 1 x Gigabit and 1 x 10/100Mbps Ethernet
• Connector Type: RJ45
Console / Debug Ports
• Serial console port (inside the box)

Matrix-702 ardware Guide
ARTILA
6
SD Slot
• SD 2.0 compliant, supports SD C
• 1 x microSD socket (inside the box)
Expansion
• 1 x miniPCIe Full-size socket
• 1 x micro-SIM card socket reserved (inside the box)
• 2 x SMA-type Antenna holes reserved
Power Requirement
• Input Voltage: +9~+48VDC (terminal block or DC-Jack)
• Typical Power Consumption: 12VDC@120mA
General
• Real-time Clock (RTC): Yes
• Buzzer: Yes
• Watchdog: Yes
• Dimensions (W x L x ): 89 x 109.6 x 30mm (3.5 x 4.7 x 1.18in)
• Weight: 330g (0.72lb)
• Operating Temperature: 0~70°C (32~158°F)
• Regulation: CE Class A, FCC Class A
• Installation: Wall mounting, DIN-rail mounting (with optional kit)
1.3 Specifications (Software)
peration System
• Linux kernel 4.19.x
• Supports bootup from eMMC or SD card
• Support Backup/Restore from SD card or USB device
• Boot Loader: Barebox
• File System: EXT4
Software Development
• Toolchain: gcc 8.2.0xx + glibc 2.28xx
• Supports in-place C/C++ code compilation
Package Management
• Package repository: Artila self-maintained repository
• Command: Using standard apt-get command

Matrix-702 ardware Guide
ARTILA
7
Popular Packages
 Web server: Apache/Nginx/Lighttpd
 Database: MySQL/SQLite3/PostgreSQL
 Script Language: P P/Python/Perl/NodeJS
 Text editor: vim/nano/sed
 Administration: Webmin
Software perating & Utility
Please refer to “M-A5D35” system on module information for software operating &
utility at following: http://www.artila.com/download/A5D35/Linux/
1.4 Packing List
 Matrix-702: Linux-ready Cortex-A5 536M z Industrial IoT Gateway
with 512MB SDRAM, 16GB eMMC Flash
1.5 ptional Accessory
 DK-35A (36-DK35A-000): DIN RAIL Mounting Kit
 PWR-12V-1A (31-62100-000): 110~240VAC to 12VDC 1A Power Adaptor

Matrix-702 ardware Guide
ARTILA
8
2. Layout
2.1 Connector & LED Indicator
System Ready LED
LINK LED
+9~+48 VDC
Power Input
LAN2
10/100Mbps
Ethernet Port
ole reserved for
Antenna
LAN1
Gigabit
Ethernet Port
ole reserved for
Antenna
+12VDC
Power Input

Matrix-702 ardware Guide
ARTILA
9
2.2 Dimension
Unit: mm

Matrix-702 ardware Guide
ARTILA
10
3. Pin Assignment and Definitions
3.1 LED Indicators
The LED provides the Matrix-702 operation information. The LED status is described
as follow:
 “READY” (Ready LED indicator): Ready LED will turn on in green color while
power is properly supplied. After system is ready for operation, Ready LED will
keep in solid orange color and a beep will be heard
 “LINK” (Network LED indicator): Link and Activity LED will turn ON when the
communication mPCIe Module installed. When there is network data traffic, this
LED will flash.
“LINK” LED indicators (controlled by GPIO: PA23) is defined by user.
Please refer to “Status” LED indicator’s programming on software guide.
3.2 Ethernet LAN Port
The Ethernet Port use RJ45 connector for both
LAN1: Gigabit Ethernet port and LAN2: 10/100Mbps Ethernet port
Pin definition of GigaLAN port (LAN1)
PIN Signal
1 TP0 +
2 TP0 -
3 TP1 +
6 TP1 -
4 TP2 +
5 TP2 -
7 TP3 +
8 TP3 -

Matrix-702 ardware Guide
ARTILA
11
Pin definition of 10/100LAN connector (LAN2)
PIN Signal
1 ETx +
2 ETx -
3 ERx +
6 ERx -
3.3 Power Connector
Connecting +9 ~ +48VDC power line to either “Terminal Block” or “Power Jack”.
In the meantime, Ready LED will turn on in green color while power is properly
supplied. After system is ready for operation, Ready LED will keep in solid orange
color and a beep will be heard

3.4 Console Port
There is a serial console ports (4-pin wafer box header / JP1) inside the Matrix-702.
Pin assignment is: RX, TX, +3.3V, GND.
Therefore, you need to open the upper metal case and prepare or purchase a serial
console cable to use the serial console port.
Or, it can be purchased “Console Cable” from Artila, P/N is CB-P DF9-050.
1
2
3
4
RX
TX
+3.3V
GND

Matrix-702 ardware Guide
ARTILA
12
3.5 miniPCIe Slot
The Matrix-702 comes with one miniPCIe (mPCIe) slot and dual holes for antenna
reserved for communication/networking functionality.
3.6 SIM card Socket
There is a micro-SIM card socket inside.
After removed top cover, it can be inserted a micro-SIM card accompanying LTE/4G
module.

Matrix-702 ardware Guide
ARTILA
13
3.7 SD card Socket
There is a micro-SD card socket inside as data storage.
After removed top cover, it can be accessed the SD card.