Vantron VT-M2M-BTA-DE-A User manual

1 / 28
VT-M2M-BTA-DE-A
User’s Manual

2 / 28
Chengdu Vantron Technology, Ltd.
www.vantrontech.com

3 / 28
Table of Contents
1Foreword...........................................................................................5
1.1 Copyright Notice ..................................................................... 5
1.2 Notes ............................................................................5
1.3 Statement ............................................................................6
1.4 Disclaimer ............................................................................6
1.5 Limitation of Liability/Non-warranty......................................6
1.6 Safety Instructions ...................................................................7
1.7 Precautions ............................................................................7
1.8 Safety Instructions for Power Cables and Accessories ............ 7
1.9 Cleaning Instructions............................................................... 8
2Overview ...........................................................................................9
2.1 Introduction ............................................................................9
2.2 Product Series.......................................................................... 9
2.2.1 Product Order Coding Rule.......................................9
2.2.2 Ordering Information ..............................................10
3VT-M2M-BTA-DE-A Hardware Instructions.............................. 11
3.1 Product Appearance............................................................... 11
Top View .......................................................................................... 12
3.2 Specifications.........................................................................13
3.3 Interface Description.............................................................. 15
3.3.1 Wide-Range Power Interface...................................15
3.3.2 Ethernet Interface....................................................15
3.3.3 D Sub-9 RS232 Connector......................................16
3.3.4 VGA Interface .........................................................18
3.3.5 USB Host Connector...............................................19

4 / 28
3.4 Operation Notice.................................................................... 20
3.4.1 Change SIM Card....................................................20
3.4.2 Power Supply ..........................................................20
4Tips ..................................................................................................21

5 / 28
1Foreword
1.1 Copyright Notice
While all information contained herein have been carefully checked to
assure its accuracy in technical details and printing, Vantron assumes no
responsibility resulting from any error or features of this manual, or from
improper uses of this manual or the software. Please contact our technical
department for relevant operation solutions if there is any problem that
cannot be solved according to this manual.
Vantron reserves all rights of this manual, including the right to
change the content, form, product features, and specifications contained
herein at any time without prior notice. The latest version of this manual
is at www.vantrontech.com.cn. Please contact Vantron for further
information:
Vantron Technology（Vantron）
E-mail: [e-mail]
The trademarks and registered trademarks in this manual are properties
of their respective owners. No part of this manual may be copied,
reproduced, translated or sold. No changes or other purposes are
permitted without the prior written consent of Vantron.
Vantron reserves the right of all publicly-released copies of this
manual.
1.2 Notes
Applicable notes are listed in the following table:

6 / 28
Sign
Notice Type
Description
Notice Important information and regulations
Caution Caution for latent damage to system or harm
to personnel
1.3 Statement
It is recommended to read and comply with this manual before
operating VT-M2M-BTA-DE-A which provides important guidance and
helps decreasing the danger of injury, electric shock, fire, or any damage
to the device.
1.4 Disclaimer
Vantron assumes no legal liability of accidents resulting from failure of
conforming to the safety instructions.
1.5 Limitation of Liability/Non-warranty
For direct or indirect damage to this device or other devices of Vantron
caused by failure of conforming to this manual or the safety instructions
on device label, Vantron assumes neither warranty nor legal liability even
if the device is still under warranty.
The VT-M2M-BTA-DE-A should be installed, debugged and
maintained by professional people.
The outside antennas are not permitted to be installed or to be changed
by non-professional people. To run the device normally, only specify
antennas are approved to be assembled together by professional people.
Unit shall be used with indoor-use antenna only. No antenna for this
unit can be installed outdoor.

7 / 28
1.6 Safety Instructions
Keep and comply with all operation instructions, warnings, and
information.
Pay attention to warnings on this device.
Read the following precautions so as to decrease the danger of injury,
electric shock, fire, or any damage to the device.
Operations and Service instructions are provided with the equipment.
Unit shall be used with indoor-use antenna only. No antenna for this
unit can be installed outdoor.
The maximum operation temperature is 61°C.
1.7 Precautions
Pay attention to the product labels/safety instructions printed on silk
screens.
Do not try repairing this product unless declared in this manual.
Keep away from heat source, such as heater, heat dissipater, or
engine casing.
Do not insert other items into the slot (if any) of this device.
• Keep the ventilation slot ventilated for cooling.
•System fault may arise if other items are inserted into this device.
Installation: ensure correct installation according to instructions from
the manufacturer with recommended installation tools.
Ensure ventilation and smoothness according to relevant ventilation
standard.
1.8 Safety Instructions for Power Cables and Accessories
Proper power source only Start only with power source that
satisfies voltage label and the voltage necessary according to this manual.
Please contact technical support personnel of Vantron for any uncertainty
about the requirements of necessary power source.

8 / 28
Use tested power source This product still contains a button
lithium battery as a real-time clock after its external power source is
removed and therefore should not be short-circuited during transportation
or placed under high temperature.
Place cables properly: Do not place cables at any place with
extrusion danger.
1.9 Cleaning Instructions
Please power off before cleaning the device.
Do not use spray detergent.
Clean with a damp cloth.
Do not try cleaning exposed electronic components unless with a dust
collector.
Support for special fault: Power off and contact technical support
personnel of Vantron in case of the following faults:
The device is damaged.
The temperature is excessively high.
Fault is still not solved after the operation according to the
manual.

9 / 28
2Overview
2.1 Introduction
Thank you for choosing Vantron. It is our commitment to provide our
valued customers with the embedded devices equipped with the
state-of-the-art technology and the best product services.
Vantron’s VT-M2M-BTA-DE-A is based on the most advanced ARM
and Intel Atom processors and has low-power consumption and high
integration. The products are designed for applications of Gateway in
industrials, medicals, financial, retail, vehicle, and transportations etc.
2.2 Product Series
2.2.1 Product Order Coding Rule
Order Code
VT-M2M-BTA-DE-A-S-1GM-16GF-GWZ-V
Version:
I: Extended Temperature
Blank:Commercial temperature
Wireless Module Option:
G:4G , W: WiFi, M: mCARD,
SD Memory Size: 16G: 16GB
DDR Memory Size: 1G: 1GB, 2G: 2GB
CPU Speed: S/D/Q: Single / Dual/ Quad

10 / 28
2.2.2 Ordering Information
Order Examples:
VT-M2M-BTA-DE-A-S-2GM-16GF-
GWM-I
ATOM Baytrail single Processor, 2GB DDR3L, 16GB SSD, 4G, WiFi,
mCARD, extended temperature

11 / 28
3VT-M2M-BTA-DE-A Hardware Instructions
3.1 Product Appearance
Front View
Rear View

12 / 28
Top View

13 / 28
3.2 Specifications
Specifications
CPU Processor Intel® ATOM™, E3815/1.46GHz, 512KB L2 cache per core
Memory
On Board RAM On Board DDRIII 1066MT/s , up to 2GB
SSD Internal Half-Slim SSD Module Internal (16GB)
Display Resolution Up to 2560x1600@60Hz for VGA
Interface 1xVGA (DB15)
Wireless
Communication
WLAN Optional 802.11 b/g/n Wireless Module, external antenna , Support 1x
Half PCIe Wireless card
4G Module 1xPCIE 4G/LTE Cellular Module with SIM slot
RF Module Zigbee Module with external antenna
BT BT module, external antenna
Peripheral
Interfaces
Ethernet 2x10/100/1000-BaseT(RJ45)
USB 2xUSB2.0 Host (Type A)
Audio HD Audio, 1xMIC in 3.5mm, 1xline Out 3.5mm
COM Port 1xRS232/485/422(DB9 full function),
1xRS232/485(2 wires on Green Terminal)
Alarm Buzzer Out
SD card 1xSD card Slot
RTC Supported
Control Reset and On/Off Button on the top
GPIO Reserved GPIO (Terminal)
CAN 1x CAN2.0b

14 / 28
Accelerometer On Board Accelerometer, 3-Axis
Security security
On board Registration Serial Number, and SHA-1
Encrypt/Decrypt Chip DS28E01(Optional)
Optional TPM module
Software OS
Linux, XOS, Paker’s pre-program golden image
Applications SDK Available
Power Input DC12 / 24V(9-36V), Locked Power Jack
Consumption 6W (Pulse10W), Sleep 2W. (without 4G,WLAN)
Mechanical
Dimensions 176x101x52mm (Box)
Install Brackets 198x101x52mm
Weight 0.6Kg (1.2Kg package Kit)
Enclosure Aluminum Alloy with Black Color
Environment
Condition
Temperature
Operating:-20°C ~ +60°C
( ETR:-40°C ~ +80°C Optional)
Storage:-40°C ~ +85°C
Humidity 5-95%RH at 25-35 (Non-Condensation)
Cooling Mode Fan less, Heat Sink
Approvals UL, FCC, IC, CE, RoHS, and PTCRB Compliance

15 / 28
3.3 Interface Description
3.3.1 Wide-Range Power Interface
Power JACK with lock
Pin
Description
1,3
DGND (ground pin)
2 Power (+12 DC,UP to 36V)
3.3.2 Ethernet Interface
Standard RJ45 interface, supporting 10M/100M/1000M self-adaptation,
this is a standard RJ45 ethernet port.

16 / 28
3.3.3 D Sub-9 RS232 Connector
Standard vertical DB-9 male connector
Pin Description
Remark
s
1 DCD1/422TX+/485_A
BIOS
set
2 RXD1/422TX-/485_B
BIOS
set
3 TXD1/422RX+
BIOS
set
4 DTR1/422RX-
BIOS
set
5 DGND (ground pin)
6 DSR1
7 RTS1
8 CTS1
9 RI1

17 / 28
RS232/485 ,CAN,External IO Connector
12pins 3.81 pitch terminal with screw lock
Load capacity: more than 128 nodes/RS485 channel
Pin
Description
Remarks
1
TXD2/485_2_A
BIOS set
2
RXD2/485_2_B
BIOS set
3
DGND
4
CANH
5
CANL
6
DGND
7 EXTIO0
3.3V Level
8
EXTIO1
3.3V Level
9
EXTIO2
3.3V Level
10
EXTIO3
3.3V Level
11
EXTIO4
3.3V Level
12
EXTIO5
3.3V Level

18 / 28
3.3.4 VGA Interface
Standard vertical DB-15 Female VGA connector
Pin
Description
1 RED
2
GREEN
3
BLUE
4
N.C.
5 GND
6
GND
7
GND
8
GND
9 +5VDC
10
GND
11
N.C.
12
SD_DDC
13 HSYNC
14
VHYNC
15
SC_DDC

19 / 28
3.3.5 USB Host Connector
Dual vertical USB A type interface, USB2.0
Pin
Description
A1
USB1_VCC(+5VDC)
A2
USB1_D-
A3
USB1_D+
A4
USB1_DGND(ground pin)
B1
USB2_VCC(+5VDC)
B2
USB2_D-
B3
USB2_D+
B4
USB2_DGND(ground pin)
Notes: Insert external device in USB1 connector should before powering
up.

20 / 28
3.4 Operation Notice
3.4.1 Change SIM Card
Push the small button on the left of SIM Card Holder, and install the SIM
card to the holder. Then push the holder into the Slot.
3.4.2 Power Supply
Please make sure using adapter in the accessory, or the power is not
reversed when powered by other adapter.