Artiste ABH 102 User manual

ADD: No. 6 Building, 173#, Dunhe Road, Haizhu
District, Guangzhou City, Guangdong Province, China
Telephone: [phone]
Mobile Phone: [phone]
Web: http://artiste.en.alibaba.com/
广州雅天科技有限公司
ARTISTE TECHNOLOGY LTD.
Manual
ABH102

Dear customer:
Thank you for purchasing our high quality electronic product. This product uses international advanced
Bluetooth wireless audio transmission technology, which has stable signal ( high frequency modulation,
easily to avoid other signal interference), stereo Hi-Fi sound quality, strong versatility etc.. The scope
of product: audio devices with Bluetooth , including PC, mobile phone, MP3, notebook, etc..
Note:
1. When pair with the mobile phone ,function of the headset may change according to type of the mobile
phone.
2. Some of the equipments , especially those without the Bluetooth Technology Alliance (SIG) testing or
approval, may not be compatible with this product.
1. USB charging cable
2. The LINE IN line
3. Bluetooth headset
Product Overview
1
1
3
On/Off R
L
MIC
Set the Power switch on the headset to ON to turn on the
headset. The headset will have a Beeping sound , Charging
LED ( blue) will be on.
1. It will automatically connect to the last connected Bluetooth
device.
2. If there is no device paired with headset, it will automatically
enter the standby mode, and turn off after 10 minutes.
2
You must establish the connection between the headset and a compatible device by pairing before you
can start using.
Pair
2
Accessories list:
Use instructions
Warranty card
Bluetooth headset
The LINE IN line
Product Introduction
USB&line in Jack
LED(Blue)
On/Off
On
Play/Pause
LED(Blue)
Set the Power switch on the headset to OFF to turn off
the headset.
Off

4
Low battery alarm function: When the battery power is low, the headset will issue a "beep" sound
warning to turn off theheadset.
Automatically turn off function: If the headset is not connected with any equipment in about 10 minutes,
it will automatically shut down for power saving
Headset reset function:If the headset stop working,
you need to reset the headset, please connect the headset to a charging wire /adapter , then it will reset
successfully;If it is in working , when you connect it to a charging wire /adapter ,the headset will
automatically shut down, at this time please reset it for normal work. LINE IN function : When the
USB MIRCO is connected to the audio line (3.5MM TO USB MIRCO B/M), it will automatically disconnect
Bluetooth function and change to LINE IN, used as a wired headset.
When wearing headset, please pay attention to distinguish between left and right side of the headband.
Headset on both sides has a telescopic headband design, you can adjust the headband length for more
comfortable .Stretch length was 30 ±1mm
Wearing
3 0±1 m m
3
Play/Pause
LED(Blue)
MIC
1. Ensure that the mobile device or a music player is on and the headset is closed.
2. Turn on the headset, Press the Pair button on the headset for 5 seconds until the Pairing LED (blue)
starts to flash quickly.
3. Activate the Bluetooth setting of your PC/Laptop, and select “ABH102”(ABH102 is the Bluetooth
Headphone identity number of this sample).
4. When prompted and request for passkey, enter “0000” to make the connection of your PC/Laptop
to the ABH102 headphone.
5. Once both devices were linked, the Pairing LED (blue) of ABH102, headset will starts to flash slowly.
6. Plays the music with your computer and you can start enjoy the music with the headphone.
Press the control panel on the headset to control the audio streaming (Fast Forward, Fast Backward,
Pause/Play, Volume Up/Down)
Volume Up
Volume Down
Fast Backward
Fast Forward
Lock/Unlock buttons:
Press the PLAY/PAUSE button quickly twice to lock the other buttons and there will be a warning tone.
In locked state, only PLAY/PAUSE button is effective ,the other buttons are not effective. To unlock
buttons, Press the PLAY/PAUSE button quickly twice again.
Answer:
Press the play / pause button to pick up the call
Hung:
Press the play / pause button to hung off the call .when you don`t want to answer the call,press the
play / pause for 3 seconds.
Buttons
Warning: Using the headset will weaken your ability to hear outside sounds. Therefore, please do
not use headset in the condition which may threaten your safety .

56
Charging
1.When it is charging , the green lights.
2.When the charging is completed, the green indicator light
is extinguished, charging adapter/wire can be removed.
3.If the battery is completely run out , it may take several
minutes for charging light to indicate the state of charge;
When the charging cable is not in use, please disconnect it
with the device. Excessive charging will shorten battery life.
4.If you have a fully charged battery without using ,
the battery will discharge by itself after a period of time;
5.The headset can be used when charging.
Note:
The headset is built with non removable and rechargeable battery inside, do not remove the battery or
so as not to damage the headset .
When charging for first time ,it should be charged for more than 12 hours and less than 24 hours, which
can activate the battery in best status. After that, charging only needs 2-3 hours (do not charge more
than 24 hours, or it will damage the battery life)
USB Ch arging
Specifications
A: Not successfully matched :
1. Confirm the connection device with Bluetooth function has been opened and work;
2. Check whether the headset battery power is insufficient;
3. Do not open the too many Bluetooth headsets or Bluetooth devices at the same time, to prevent
interference;
4. Confirm the headset is in pairing state and input Bluetooth headset the password correctly;
5. If the above method still can not solve this problem, reset the headset, pair it by description
B.Cannot listen to music or call by headset:
1. Increase the headset volume;
2. Confirmed the device has been successfully connected
Troubles
Safety
In order to obtain the best sound effects, please pay attention to distinguish between left and right side
of the headband.
Do not disassemble the hardware; use dry and soft cotton to clean the headset etc.
We recommend you take the following preventive measures to prevent hearing loss :
If the volume is too large, may cause hearing loss.
Adjust the appropriate volume from the minimum, increase slowly until the sound is comfortable, clear
and without distortion. If in a comfortable volume, you have tinnitus or discomfort , please turn down the
volume or stop to listen and check the hearing status.
Warning: Wireless transmission will produce electromagnetic signal, please pay attention to use
the headphone when you have cardiacpacemaker or related auxiliary instrument.
Bluetooth : V2.1 + EDR
Transmission Mode: GFSK
Operating voltage: 3.7 V
Signal-to-noise ratio: > 80 dB
Channel separation: >30 dB
Frequency response: (-3dB) 35Hz-18KHz
Operating Time: 8 hours
Standby time: 10 hours
Out Power: 8mW
Distortion: <1%