ASI Velare BTM 0661-FM-14 User manual

AMERICAN SPECIALTIES, INC.
441 Saw Mill River Road, Yonkers, NY 10701
[phone] • [phone]
www.americanspecialties.com
THIS MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES IN DESIGN OR DIMENSIONS WITHOUT FORMAL NOTICE
MODEL №:
ISSUED:
REVISED:
IMPORTANT: READ THESE INSTRUCTIONS COMPLETELY PRIOR TO BEGINNING
INSTALLATION. SAVE FOR FUTURE REFERENCE.
INSTALLATION OF MOUNTING HARDWARE
Appropriate wall reinforcement must be prepared prior to initiating the Velare™ BTM System installation.
Install the mounting plate on wall using six (6) № 12 self-threading, pan-head screws (by others) ( Fig. 1) into appropriate anchoring and
wall reinforcements (Fig. 2). Hang cabinet on wall mounting hanger hook (Fig. 3). Suggested mounting height is to position bottom of
module 16" [406] to 20" [508] above vanity top so bottom aligns with Model №’s 0661-X or 0663-X on either side of Filler Module (Fig.
4). Install two (2) №12 self-tapping locking screws (by others) into appropriate anchoring to prevent unit from being lifted off hanger
hooks (Fig. 2).
0661-FM-14
VELARE™ BTM SURFACE MOUNTED FILLER MODULE INSTALLATION GUIDE (PG 1 of 2)
FIG. 1
FIG. 2
FIG. 3
FIG. 4
18 MAR 2019

AMERICAN SPECIALTIES, INC.
441 Saw Mill River Road, Yonkers, NY 10701
[phone] • [phone]
www.americanspecialties.com
THIS MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES IN DESIGN OR DIMENSIONS WITHOUT FORMAL NOTICE
MODEL №:
ISSUED:
REVISED:
0661-FM-14
18 MAR 2019
VELARE™ BTM SURFACE MOUNTED FILLER MODULE INSTALLATION GUIDE (PG 2 of 2)
MIRROR DOOR SET UP
Position mirror in front of cabinet and insert top and bottom rear tabs into receiver-slots. (Fig. 5) Secure mirror with two (2) № 10-32 x
1/2" Hex Socket Cap screws with lock washer and flat washer (provided) (Fig. 7) to the bottom mirror mounting brackets throug h the
bottom access holes by engaging and securing to threaded inserts provided on bottom mirror rear mounting tabs (Fig. 6). Cover the screw
access holes using the two (2) black plastic hole caps (supplied).
FIG. 5
FIG. 6
FIG. 7