ASROCK Z690D4U/G5 User manual

User Manual
Z690D4U/G5
Z690D4U-2L2T/G5
W680D4U-2L2T/G5
Z690D4U-2L2T/G5/BCM
W680D4U-2L2T/G5/BCM
Version 1.0
Published December 2023
Copyright©2023 ASRock Rack INC. All rights reserved.

Version 1.0
Published March 2023
Copyright©2023 ASRock Rack INC. All rights reserved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or translated
in any language, in any form or by any means, except duplication of documentation by the
purchaser for backup purpose, without written consent of ASRock Rack Inc.
Products and corporate names appearing in this documentation may or may not be
registered trademarks or copyrights of their respective companies, and are used only for
identication or explanation and to the owners’ benet, without intent to infringe.
Disclaimer:
Specifications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock Rack. ASRock Rack assumes no responsibility
for any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock Rack does not provide
warranty of any kind, either expressed or implied, including but not limited to the implied
warranties or conditions of merchantability or tness for a particular purpose.
In no event shall ASRock Rack, its directors, ocers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for loss of
prots, loss of business, loss of data, interruption of business and the like), even if ASRock
Rack has been advised of the possibility of such damages arising from any defect or error
in the documentation or product.
is device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
is equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. ese limits are designed to provide reason-
able protection against harmful interference in a residential installation. is equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in ac-
cordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user is encouraged to try to
correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
INTEL END USER SOFTWARE LICENSE AGREEMENT
IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING.
LICENSE. Licensee has a license under Intel’s copyrights to reproduce Intel’s Software
only in its unmodified and binary form, (with the accompanying documentation, the
“Soware”) for Licensee’s personal use only, and not commercial use, in connection with
Intel-based products for which the Soware has been provided, subject to the following
conditions:
(a) Licensee may not disclose, distribute or transfer any part of the Soware, and You agree
to prevent unauthorized copying of the Soware.
(b) Licensee may not reverse engineer, decompile, or disassemble the Soware.
(c) Licensee may not sublicense the Soware.
(d) e Soware may contain the soware and other intellectual property of third party
suppliers, some of which may be identied in, and licensed in accordance with, an
enclosed license.txt le or other text or le.
(e) Intel has no obligation to provide any support, technical assistance or updates for the
Soware.
OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Soware
remains with Intel or its licensors or suppliers. e Soware is copyrighted and protected
by the laws of the United States and other countries, and international treaty provisions.
Licensee may not remove any copyright notices from the Soware. Except as otherwise ex-
pressly provided above, Intel grants no express or implied right under Intel patents, copy-
rights, trademarks, or other intellectual property rights. Transfer of the license terminates
Licensee’s right to use the Soware.
DISCLAIMER OF WARRANTY. e Soware is provided “AS IS” without warranty of
any kind, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PUR-
POSE.
LIMITATION OF LIABILITY. NEITHER INTEL NOR ITS LICENSORS OR SUPPLIERS
WILL BE LIABLE FOR ANY LOSS OF PROFITS, LOSS OF USE, INTERRUPTION OF
BUSINESS, OR INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAG-
ES OF ANY KIND WHETHER UNDER THIS AGREEMENT OR OTHERWISE, EVEN
IF INTEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
LICENSE TO USE COMMENTS AND SUGGESTIONS. is Agreement does NOT ob-
ligate Licensee to provide Intel with comments or suggestions regarding the Software.
However, if Licensee provides Intel with comments or suggestions for the modication,
correction, improvement or enhancement of (a) the Soware or (b) Intel products or pro-
cesses that work with the Soware, Licensee grants to Intel a non-exclusive, worldwide,
perpetual, irrevocable, transferable, royalty-free license, with the right to sublicense, under

Licensee’s intellectual property rights, to incorporate or otherwise utilize those comments
and suggestions.
TERMINATION OF THIS LICENSE. Intel or the sublicensor may terminate this license
at any time if Licensee is in breach of any of its terms or conditions. Upon termination, Li-
censee will immediately destroy or return to Intel all copies of the Soware.
THIRD PARTY BENEFICIARY. Intel is an intended beneciary of the End User License
Agreement and has the right to enforce all of its terms.
U.S. GOVERNMENT RESTRICTED RIGHTS. The Software is a commercial item (as
dened in 48 C.F.R. 2.101) consisting of commercial computer soware and commercial
computer soware documentation (as those terms are used in 48 C.F.R. 12.212), consistent
with 48 C.F.R. 12.212 and 48 C.F.R 227.7202-1 through 227.7202-4. You will not provide
the Soware to the U.S. Government. Contractor or Manufacturer is Intel Corporation,
2200 Mission College Blvd., Santa Clara, CA 95054.
EXPORT LAWS. Licensee agrees that neither Licensee nor Licensee’s subsidiaries will
export/re-export the Software, directly or indirectly, to any country for which the U.S.
Department of Commerce or any other agency or department of the U.S. Government or
the foreign government from where it is shipping requires an export license, or other gov-
ernmental approval, without rst obtaining any such required license or approval. In the
event the Soware is exported from the U.S.A. or re-exported from a foreign destination
by Licensee, Licensee will ensure that the distribution and export/re-export or import of
the Soware complies with all laws, regulations, orders, or other restrictions of the U.S.
Export Administration Regulations and the appropriate foreign government.
APPLICABLE LAWS. is Agreement and any dispute arising out of or relating to it will
be governed by the laws of the U.S.A. and Delaware, without regard to conflict of laws
principles. The Parties to this Agreement exclude the application of the United Nations
Convention on Contracts for the International Sale of Goods (1980). e state and federal
courts sitting in Delaware, U.S.A. will have exclusive jurisdiction over any dispute arising
out of or relating to this Agreement. e Parties consent to personal jurisdiction and venue
in those courts. A Party that obtains a judgment against the other Party in the courts iden-
tied in this section may enforce that judgment in any court that has jurisdiction over the
Parties.
Licensee’s specic rights may vary from country to country.
e terms HDMI®and HDMI High-Denition Multimedia Interface, and the HDMI logo are
trademarks or registered trademarks of HDMI Licensing LLC in the United States and other
countries.

CALIFORNIA, USA ONLY
e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate”
AUSTR ALIA ONLY
Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and compensation for
any other reasonably foreseeable loss or damage caused by our goods. You are also entitled
to have the goods repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure. If you require assistance please call ASRock
Rack Tel : [phone] ext.123 (Standard International call charges apply)
ASRock Rack INC. hereby declares that this device is in compliance with the essential
requirements and other relevant provisions of related UKCA Directives. Full text of UKCA
declaration of conformity is available at: http://www.asrockrack.com
ASRock Rack INC. hereby declares that this device is in compliance with the essential re-
quirements and other relevant provisions of related Directives. Full text of EU declaration
of conformity is available at: http://www.asrockrack.com
ASRock Rack follows the green design concept to design and manufacture our products,
and makes sure that each stage of the product life cycle of ASRock Rack product is in line
with global environmental regulations. In addition, ASRock Rack disclose the relevant
information based on regulation requirements.
Please refer to https://www.asrockrack.com/general/about.asp?cat=Responsibility for
information disclosure based on regulation requirements ASRock Rack is complied with:
DO NOT throw the motherboard in municipal waste. is product has been
designed to enable proper reuse of parts and recycling. is symbol of the
crossed out wheeled bin indicates that the product (electrical and electronic
equipment) should not be placed in municipal waste. Check local regulations
for disposal of electronic products.

Contents
Chapter 1 Introduction 1
1.1 Package Contents 1
1.2 Specications 2
1.3 Unique Features 9
1.4 Motherboard Layout 10
1.5 Onboard LED Indicators 16
1.6 I/O Panel 18
1.7 Block Diagram 21
Chapter 2 Installation 23
2.1 Screw Holes 23
2.2 Pre-installation Precautions 23
2.3 Installing the CPU 24
2.4 Installing the CPU Fan and Heatsink 26
2.5 Installing Memory Modules (DIMM) 27
2.6 Expansion Slots (PCI Express Slots) 29
2.7 Jumper Setup 30
2.8 Onboard Headers and Connectors 31
2.9 Dr. Debug 37
2.10 Unit Identication purpose LED/Switch 43
2.11 Dua LAN and Teaming Operation Guide 44
2.12 M.2 SSD Module Installation Guide (M2_1) 45
Chapter 3 UEFI Setup Utility 47
3.1 Introduction 47

3.1.1 UEFI Menu Bar 47
3.1.2 Navigation Keys 48
3.2 Main Screen 49
3.3 OC Tweaker 50
3.3.1 CPU Conguration 51
3.3.2 DRAM Conguration 56
3.3.3 Voltage Conguration 67
3.4 Advanced Screen 72
3.4.1 CPU Conguration 73
3.4.2 Storage Conguration 76
3.4.3 PCH-FW Conguration 79
3.4.4 Storage Conguration 80
3.4.5 NVME Conguration 81
3.4.6 ACPI Conguration 82
3.4.7 USB Conguration 83
3.4.8 Super IO Conguration 84
3.4.9 Serial Port Console Redirection 85
3.4.10 H/W Monitor 89
3.4.11 Trusted Computing 90
3.4.12 Intel ME Conguration 92
3.4.13 Network Stack Conguration 93
3.4.14 VMD Conguration 94
3.4.15 Driver Health 95
3.4.16 Instant Flash 96

3.5 Security Screen 97
3.5.1 Key Management 98
3.6 Boot Screen 99
3.7 Server Mgmt 101
3.7.1 System Event Log 102
3.7.2 BMC Network Conguration 103
3.7.3 BMC Tools 105
3.8 Event Logs 106
3.9 Exit Screen 108
Chapter 4 Software Support 109
4.1 Download and Install Operating System 109
4.2 Download and Install Software Drivers 109
4.3 Contact Information 109
Chapter 5 Troubleshooting 110
5.1 Troubleshooting Procedures 110
5.2 Technical Support Procedures 112
5.3 Returning Merchandise for Service 112

Z690D4U & W680D4U G5 Series
PB 1
English
Chapter 1 Introduction
Thank you for purchasing ASRock Rack Z690D4U-2L2T/G5 / W680D4U-2L2T/G5 /
Z690D4U/G5 / Z690D4U-2L2T/G5/BCM / W680D4U-2L2T/G5/BCM motherboard, a
reliable motherboard produced under ASRock Rack’s consistently stringent quality control. It
delivers excellent performance with robust design conforming to ASRock Rack’s commitment
to quality and endurance.
In this manual, chapter 1 and 2 contains introduction of the motherboard and step-by-step
guide to the hardware installation. Chapter 3 and 4 contains the conguration guide to BIOS
setup and information of the Soware Support.
1.1 Package Contents
• ASRock Rack Z690D4U/G5 / Z690D4U-2L2T/G5 / W680D4U-2L2T/G5 /
Z690D4U-2L2T/G5/BCM / W680D4U-2L2T/G5/BCM Motherboard
(mATX Form Factor: 9.6-in x 9.6-in, 24.4 cm x24.4 cm)
• Quick Installation Guide
• 1 x SATA3 Cable (60cm)
• 1 x I/O Shield
• 1 x Screw for M.2 Socket
If any items are missing or appear damaged, contact your authorized dealer.
Because the motherboard specications and the BIOS soware might be updated, the con-
tent of this manual will be subject to change without notice. In case any modications of
this manual occur, the updated version will be available on ASRock Rack website without
further notice. You may nd the latest memory and CPU support lists on ASRock Rack
website as well. ASRock Rack’s Website: www.ASRockRack.com
If you require technical support related to this motherboard, please visit our website for
specic information about the model you are using.
http://www.asrockrack.com/support/

2 3
English
1.2 Specications
Z690D4U-2L2T/G5 / W680D4U-2L2T/G5 / Z690D4U-2L2T/G5/BCM /
W680D4U-2L2T/G5/BCM
MB Physical Status
Form Factor Micro-ATX
Dimension 9.6'' x 9.6'' (244 mm x 244 mm)
Processor System
CPU Z690D4U-2L2T/G5 / Z690D4U-2L2T/G5/BCM:
- Supports 12th & 13th Gen Intel® Core™, Pentium® and Celeron®
series processors
W680D4U-2L2T/G5 / W680D4U-2L2T/G5/BCM:
- Supports 12th & 13th Gen Intel® Core™ series processors
Socket Single Socket LGA 1700
ermal Design
Power (TDP)
125W
Chipset Z690D4U-2L2T/G5 / Z690D4U-2L2T/G5/BCM: Intel® Z690
W680D4U-2L2T/G5 / W680D4U-2L2T/G5/BCM: Intel®
W680
System Memory
Supported
DIMM Quantity
4 DIMM slots (2DPC)
Supported Type Z690D4U-2L2T/G5 / Z690D4U-2L2T/G5/BCM:
- Supports DDR5 288-pin non-ECC UDIMM
W680D4U-2L2T/G5 / W680D4U-2L2T/G5/BCM:
- Supports DDR5 288-pin ECC/non-ECC UDIMM
Max. Capacity
per DIMM
32GB
Max. Frequency 4400MT/s (2DPC-1DIMM) / 4000MT/s (2DPC-2DIMM 1R) /
3600MT/s (2DPC-2DIMM 2R)
Voltage 1.1V
Note memory support is to be validated
PCIe Expansion Slots (SLOT7 close to CPU)
SLOT7 PCIe4.0 x4* [CPU]
SLOT6 PCIe5.0 x16 [CPU]
SLOT4 PCIe3.0 x1 [PCH]
Note *SLOT7 share lanes with OCuLink4. OCuLink4 will disable when SLOT7 is
populated
Other PCIe Expansion Connectors
M.2 slot 1 M-key (PCIe3.0x4) [PCH]; support 2280/2260/2242/2230
form factor

Z690D4U & W680D4U G5 Series
2 3
English
OCuLink 1 OCuLink (PCIe4.0 x4)* [CPU]
1 OCuLink (PCIe4.0 x4 or 4 SATA 6Gb/s) [PCH]
1 OCuLink (PCIe4.0 x4) [PCH]
1 OCuLink (PCIe3.0 x4) [PCH]
Note *SLOT7 share lanes with OCuLink4. OCuLink4 will disable when SLOT7 is
populated
SATA/SAS Storage
PCH Built-in
Storage
Intel® Z690 (8 SATA 6Gb/s; RAID 0/1/5/10):
4 SATA 7-pin, 1 OCuLink
Intel® W680 (8 SATA 6Gb/s; RAID 0/1/5/10):
4 SATA 7-pin, 1 OCuLink
Ethernet
Additional
Ethernet
Controller
Z690D4U-2L2T/G5 / W680D4U-2L2T/G5:
2 RJ45 (10GbE) by Intel® X710
2 RJ45 (1GbE) by Intel® i210
Z690D4U-2L2T/G5/BCM / W680D4U-2L2T/G5/BCM:
2 RJ45 (10GbE) by Broadcom BCM57416
2 RJ45 (1GbE) by Intel® i210
USB
Controller/Hub Intel® Z690 / Intel® W680
Connectors/
headers
External:
2 Type-A (USB3.2 Gen1)
Internal:
1 header (19-pin, 2 USB3.2 Gen1)
1 header (9-pin, 2 USB2.0)
Graphics
Controller ASPEED AST2600:
1 DB15 (VGA)
Intel® Integrated Processor Graphics:
1 HDMI, 1 DisplayPort
Security
TPM 1 (13-pin, SPI)
Rear I/O
UID button/
LED
1 UID button w/ LED
Video output 1 DB15 (VGA), 1 HDMI, 1 DisplayPort
Serial port 1 DB9 (COM)
USB 2 Type A (USB3.2 Gen1)
RJ45 2 RJ45(10GbE), 2 RJ45(1GbE), 1 dedicated IPMI
Hardware Monitor
Temperature CPU, MB, Card side, VR, M.2, X710, TR1 Temperature
sensing

4 5
English
Fan Fan Tachometer
CPU Quiet Fan (Allow Chassis Fan Speed Auto-Adjust by
CPU Temperature)
Fan Multi-Speed Control
Voltage 3VSB, 5VSB, CPU_VCORE, VCCIN_AUX,VDD2, 1.05V_
PCH, 0V82SB_PCH, VCCGT, 1V8SB, VCCSA, BAT, 3V, 5V,
12V
Server Management
BMC Controller ASPEED AST2600: iKVM, vMedia support
IPMI Dedicated
GLAN
1 RJ45 Dedicated IPMI LAN port by Realtek RTL8211F
System BIOS
BIOS type AMI 256Mb SPI Flash ROM
Features Plug and Play, ACPI 6.4 and above compliance wake up
events, SMBIOS 2.8 and above, ASRock Rack Instant Flash
Internal Connectors/Headers
PSU connector 1 (24-pin, ATX main power), 2 (8-pin, ATX 12V)
Auxiliary panel
header
1 (18-pin): chassis intrusion, system fault LED, LAN1/LAN2
activity LED, locate, SMBus
System panel
header
1 (9-pin): power switch, reset switch, system power LED,
HDD activity LED
NMI button 1
VGA header 1
Speaker header 1 (4-pin)
Buzzer 1
Fan header 7 (4-pin)
ermal sensor
header
1
TPM header 1 (13-pin, SPI)
SGPIO header 1
SMbus header 1
PMbus header 1
IPMB header 1
Clear CMOS 1 (contact pads)
LED Indicators
Standby Power
LED
1 (5VSB)
80 debug port
LED
1
Fan Fail LED 7
BMC Heartbeat
LED
1
Supported OS
Microso®
Windows®
Windows® 10 (64bit)
Windows® 11 (64 bit)

Z690D4U & W680D4U G5 Series
4 5
English
is motherboard supports Wake from on Board LAN. To use this function, please make
sure that the “Wake on Magic Packet from power o state” is enabled in Device Manager
> Intel® Ethernet Connection > Power Management. And the “PCI Devices Power On” is
enabled in UEFI SETUP UTILITY > Advanced > ACPI Conguration. Aer that, onboard
LAN1&2 can wake up S5 under OS.
If you install Intel® LAN utility or Marvell SATA utility, this motherboard may fail Win-
dows® Hardware Quality Lab (WHQL) certication tests. If you install the drivers only, it
will pass the WHQL tests.
Enviroment
Operating
temperature
10 - 35°C (50 - 95 degF)
Non-operating
temperature
-40 - 70°C (-40 - 158degF)

6 7
English
Z690D4U/G5
MB Physical Status
Form Factor Micro-ATX
Dimension 9.6'' x 9.6'' (244 mm x 244 mm)
Processor System
CPU Supports 12th Gen Intel® Core™, Pentium® and Celeron® series
processors
Socket Single Socket LGA 1700
ermal Design
Power (TDP)
125W
Chipset Intel® Z690
System Memory
Supported
DIMM Quantity
4 DIMM slots (2DPC)
Supported Type Supports DDR5 288-pin non-ECC UDIMM
Max. Capacity
per DIMM
32GB
Max. Frequency 4400MT/s (2DPC-1DIMM) / 4000MT/s (2DPC-2DIMM 1R) /
3600MT/s (2DPC-2DIMM 2R)
Voltage 1.1V
Note memory support is to be validated
PCIe Expansion Slots (SLOT7 close to CPU)
SLOT7 PCIe4.0 x4* [CPU]
SLOT6 PCIe5.0 x16 [CPU]
SLOT4 PCIe3.0 x1 [PCH]
Note *SLOT7 share lanes with OCuLink4. OCuLink4 will disable when SLOT7 is
populated
Other PCIe Expansion Connectors
M.2 slot '1 M-key (PCIe3.0 x4); support 2280/2260/2242/2230 form
factor [PCH]
OCuLink 1 OCuLink (PCIe4.0 x4)* [CPU]
1 OCuLink (PCIe4.0 x4 or 4 SATA 6Gb/s) [PCH]
2 OCuLink (PCIe4.0 x4) [PCH]
Note *SLOT7 share lanes with OCuLink4. OCuLink4 will disable when SLOT7 is
populated
SATA/SAS Storage
PCH Built-in
Storage
Intel® Z690 (8 SATA 6Gb/s; RAID 0/1/5/10):
4 SATA 7-pin, 1 OCuLink
Ethernet
Additional
Ethernet
Controller
2 RJ45 (1GbE) by Intel® i210

Z690D4U & W680D4U G5 Series
6 7
English
USB
Controller/Hub Intel® Z690
Connectors/
headers
External:
2 Type-A (USB3.2 Gen1)
Internal:
1 header (19-pin, 2 USB3.2 Gen1)
1 header (9-pin, 2 USB2.0)
Graphics
Controller ASPEED AST2600:
1 DB15 (VGA)
Intel® Integrated Processor Graphics:
1 HDMI, 1 DisplayPort
Security
TPM 1 (13-pin, SPI)
Rear I/O
UID button/
LED
1 UID button w/ LED
Video output 1 DB15 (VGA), 1 HDMI, 1 DisplayPort
Serial port 1 DB9 (COM)
USB 2 Type A (USB3.2 Gen1)
RJ45 2 RJ45(1GbE), 1 dedicated IPMI
Hardware Monitor
Temperature CPU, MB, Card side, VR, M.2, TR1 Temperature sensing
Fan Fan Tachometer
CPU Quiet Fan (Allow Chassis Fan Speed Auto-Adjust by
CPU Temperature)
Fan Multi-Speed Control
Voltage 3VSB, 5VSB, CPU_VCORE, VCCIN_AUX,VDD2, 1.05V_
PCH, 0V82SB_PCH, VCCGT, 1V8SB, VCCSA, BAT, 3V, 5V,
12V
Server Management
BMC Controller ASPEED AST2600: iKVM, vMedia support
IPMI Dedicated
GLAN
1 RJ45 Dedicated IPMI LAN port by Realtek RTL8211F
System BIOS
BIOS type AMI 256Mb SPI Flash ROM
Features Plug and Play, ACPI 6.4 and above compliance wake up
events, SMBIOS 2.8 and above, ASRock Rack Instant Flash

8 9
English
Internal Connectors/Headers
PSU connector 1 (24-pin, ATX main power), 2 (8-pin, ATX 12V)
Auxiliary panel
header
1 (18-pin): chassis intrusion, system fault LED, LAN1/LAN2
activity LED, locate, SMBus
System panel
header
1 (9-pin): power switch, reset switch, system power LED,
HDD activity LED
NMI button 1
VGA header 1
Speaker header 1 (4-pin)
Buzzer 1
Fan header 7 (4-pin)
ermal sensor
header
1
TPM header 1 (13-pin, SPI)
SGPIO header 1
SMbus header 1
PMbus header 1
IPMB header 1
Clear CMOS 1 (contact pads)
LED Indicators
Standby Power
LED
1 (5VSB)
80 debug port
LED
1
Fan Fail LED 7
BMC Heartbeat
LED
1
Supported OS
Microso®
Windows®
Windows® 10 (64bit)
Windows® 11 (64 bit)
Enviroment
Operating
temperature
10 - 35°C (50 - 95 degF)
Non-operating
temperature
-40 - 70°C (-40 - 158degF)
is motherboard supports Wake from on Board LAN. To use this function, please make
sure that the “Wake on Magic Packet from power o state” is enabled in Device Manager
> Intel® Ethernet Connection > Power Management. And the “PCI Devices Power On” is
enabled in UEFI SETUP UTILITY > Advanced > ACPI Conguration. Aer that, onboard
LAN1&2 can wake up S5 under OS.
If you install Intel® LAN utility or Marvell SATA utility, this motherboard may fail Win-
dows® Hardware Quality Lab (WHQL) certication tests. If you install the drivers only, it
will pass the WHQL tests.

Z690D4U & W680D4U G5 Series
8 9
English
1.3 Unique Features
ASRock Rack Instant Flash is a BIOS ash utility embedded in Flash ROM. is convenient
BIOS update tool allows you to update system BIOS without entering operating systems rst
like MS-DOS or Windows®. With this utility, you can press the <F6> key during the POST or
the <F2> key to enter into the BIOS setup menu to access ASRock Rack Instant Flash. Just
launch this tool and save the new BIOS le to your USB ash drive, oppy disk or hard drive,
then you can update your BIOS only in a few clicks without preparing an additional oppy
diskette or other complicated ash utility. Please be noted that the USB ash drive or hard
drive must use FAT32/16/12 le system.

10 11
English
1.4 Motherboard Layout
Z690D4U-2L2T/G5 / W680D4U-2L2T/G5 /
Z690D4U-2L2T/G5/BCM / W680D4U-2L2T/G5/BCM
DDR3_B 1 (64 bit, 240-pin module )
DDR3_A1 (64 bit, 240-pin module )
24.4cm (9.6 in)
AT XPWR1
COM1
VGA1
LAN3
IPMI
LA N
DDR5_B 2 (64 bit, 288-pin module )
DDR5_B1 (64 bit , 288-pin module )
DDR3_B 1 (64 bit, 240-pin module )
DDR3_A1 (64 bit, 240-pin module )
DDR5_A 2 (64 bit, 288-pin module )
DDR5_A1 (64 bit, 288-pin module )
PCIE 6
PCIE 7
PCIE 4
BA T1
1
PSU_SMB1
AT X12V 1
SA TA_SGPIO 1
1
1
PANEL1
AUX_P ANEL1
HDLED RESET
PLED PWRBT N
1
11
FRONT_LED_LAN1
1
IPMB_1
BMC_SMB_1
1
USB_1_2
1
UID1
24.4cm (9.6 in)
Intel
Z690/
W680
BIOS
RO M
178
3
9
T 1
1
Supe r
I/O
R
M2_1
NUT60_1NUT80_1
14
15
11
34
RoHS
36
LAN4
21
22
25
2728
31 26
US B 3.2 Gen1
T: USB3_1
B: USB3_2
HDMI1
Dr. Debug
LAN2
LAN1
1
FRNT_VGA 1
2
16
SA TA _5
SA TA _4
1
TPM_BIOS_PH1
NMI_BTN1
SEC_OR1
1
BUZZER1
18
19
2324
35
29
CLRMOS1
32
i210
SA T A_7
SA T A_6
FAN4
FAN3
FAN2
FAN1
PWM_CFG1
1
AT X12V 2
1
SPEAKER1
PECI1
1
NUT42_1
NUT30_1
FAN7
FAN6
FAN5
ASPEED
ASR2600
Displa y
Port
OCU1
OCU3
OCU2
OCU4
456
12
13
17
20
30
37
10
USB3_3_4
Z690D4U-2L2T/G5
W680D4U-2L2T/G5
Z690D4U-2L2T/G5/BCM
W680D4U-2L2T/G5/BCM
33
X710-AT2
:='8/7*
:'8/7*

BCM57416
:='8/7*%&0
:'8/7*%&0


Z690D4U & W680D4U G5 Series
10 11
English
No. Description
1 Front VGA Header (FRNT_VGA1)
2 PWM Conguration Header (PWM_CFG1)
3 2 x 288-pin DDR5 DIMM Slots (DDR5_A1, DDR5_B1)
4 ATX 12V Power Connector (ATX12V1)
5 ATX 12V Power Connector (ATX12V2)
6 PSU SMBus Header (PSU_SMB1)
7 ATX Power Connector (ATXPWR1)
8 2 x 288-pin DDR5 DIMM Slots (DDR5_A2, DDR5_B2)
9 Chassis Fan Connector (FAN4)
10 Chassis Speaker Header (SPEAKER1)
11 USB 3.2 Gen1 Header (USB3_3_4)
12 OCuLink x4 Connector (OCU4)
13 OCuLink x4 Connector (OCU3)
14 OCuLink x4 Connector (OCU1)
15 Chassis Fan Connector (FAN3)
16 Chassis Fan Connector (FAN2)
17 Chassis Fan Connector (FAN1)
18 SATA3 Connectors (SATA3_5)(Upper), (SATA3_4)(Lower)
19 SATA3 Connectors (SATA3_7)(Upper), (SATA3_6)(Lower)
20 OCuLink x4 Connector (OCU2)
21 System Panel Header (PANEL1)
22 Auxiliary Panel Header (AUX_PANEL1)
23 SATA SGPIO Connector (SATA_SGPIO1)
24 SPI TPM Header (TPM_BIOS_PH1)
25 USB 2.0 Header (USB_1_2)
26 CPU PECI Mode Jumper (PECI1)
27 ermal Sensor Header (TR1)
28 Intelligent Platform Management Bus Header (IPMB_1)
29 BMC SMBus Header (BMC_SMB_1)
30 Non Maskable Interrupt Button (NMI_BTN1)
31 Security Override Jumper (SEC_OR1)
32 Front LAN LED Connector (FRONT_LED_LAN1)
33 Clear CMOS Pad (CLRMOS1)
34 M.2 Socket (M2_1) (Type 2230/2242/2260/2280)

12 13
English
No. Description
35 Chassis Fan Connector (FAN5)
36 Chassis Fan Connector (FAN6)
37 Chassis Fan Connector (FAN7)