Assa Abloy Profile S2-PA User manual

Intelligent WiFi
Access Control
Copyright © 2003, 2004, 2007-2013, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
Profile Series v.S2
Available through Authorized Channel Partners only.
Contact your local ASSA ABLOY Door Security
Solutions sales consultant for details.
FOR TRAINING PURPOSES ONLY
DATED MATERIAL

Intelligent WiFi Access Control
Profile Series v.S2
90669:D 8/01/2013 Copyright © 2003, 2004, 2007-2013, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
1-800-727-5477 • www.sargentlock.com
On the Cover
v.S2 8200 Series Mortise Lock
with a MJ Studio Collection Lever
Table of Contents
Overview and Features ..............................................................1
Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
S2 8200 Series Mortise Locks ........................................................3
S2 10 Line Bored Locks ..............................................................4
S2 80 Series Exit Devices.............................................................5
Standard and Coastal Series Levers, Finishes & Handing ..............................6
Studio Collection Levers.............................................................7
Ordering Gramercy Series Levers ....................................................8
Lock Management Tool..............................................................9
Access Credentials .................................................................10
Accessories and Software...........................................................11
Accessories ........................................................................12
Mechanical Options & Shipping Information .......................................13
Cylinder Options ............................................................... 14-15
Windstorm Certifications: UL Listed & Florida Building Codes .......................16
Architectural Specifications ........................................................17
Profile Series v.S2
Wireless Ethernet
Typical Application
MicroShield®Coating
• Revolutionary finish coating available on all SARGENT
product lines, utilizes a silver-based antimicrobial
compound from Agion Technologies
• As an integral part of the finish coating, MicroShield®lasts for
the life of the hardware
•MicroShield®coating permanently suppresses the growth
of bacteria, algae, fungus, mold and mildew. It is effective
against a broad spectrum of bacteria.
•Non-toxic and completely safe. The Agion antimicrobial
compound is EPA and NSF approved and FDA listed for use in
medical and food preparation equipment.
• Applications: Anywhere there is need for a clean
environment (hospitals, laboratories, schools, medical
centers, daycare, food processing etc.)
MicroShield®
As part of their promise to provide innovative solutions to
their customers, certain ASSA ABLOY Group brands offer the
MicroShield®technology, a silver-based antimicrobial coating
designed to inhibit the growth of bacteria.
MicroShield®is a registered trademark of Yale Security Inc.,
an ASSA ABLOY Group company.
As part of their promise to provide innovative, fast and effective
high security solutions to their customers, certain ASSA ABLOY
Group brands offer ElectroLynx®, a universal quick-connect
system that simplifies the electrification of the door opening.
ElectroLynx®is a registered trademark of ASSA ABLOY Inc.
FOR TRAINING PURPOSES ONLY
DATED MATERIAL

Overview
The SARGENT®Profile Series v.S2 intelligent WiFi products, combined with approved third party software or Lock Management Tool, provide the ability
to manage hardware from a centralized location through a WiFi network. The Profile Series v.S2 provides a broad selection of technologies, features
and mechanical locking means housed in a sleek, architecturally pleasing design. Programming and security management is performed utilizing the
ASSA ABLOY Lock Management Tool (LMT) or a third party access control system. All products utilize a microprocessor based controller with non-volatile
memory to preserve user information.
All technology features are supported by the physical security of a SARGENT ANSI Grade 1 mechanical locking device: Mortise, Bored or Exit. These access
control devices allow for optimal electronic control and are UL Listed for use on fire doors. Trims and finishes are identical among the various technology
offerings (v.S2-PA, v.S2-PK, v.S2-IA, v.S2-IK) allowing for a cost-effective combination and design.
All technologies with a keypad feature have the option of using pin codes as an added measure of security. Each credential can be programmed to operate
the lock in a variety of modes tailored to the opening. Typical modes include Unlock, Extended Unlock, Passage and Panic.
The Lock Management Tool is a Windows®-based application that allows the programming, interrogation and overall management of the facility’s Profile
Series v.S2 locks (up to 50) from a centralized location. The LMT application, on a PC, and the Profile Series v.S2 locks communicate using a wireless
(IEEE 802.11 b/g) infrastructure.
This centralized control satisfies the need to protect occupants in a building, including updating access privileges, audit trail reporting, alarms and door
status monitoring (open/close).
About ASSA ABLOY’s Authorized Channel Partner and Certified Integrator Programs
The SARGENT v.S2 is part of a stream of new ASSA ABLOY products moving from traditional mechanical locks to being extensions of access control
systems in facilities. These exciting new technology-rich products require an increase in knowledge to ensure the correct selection and implementation
in various environments.
To aid our customers in this area, ASSA ABLOY has created two programs that provide the necessary training to sell, order, install and service our
technology products, including Integrated Wiegand, IP-enabled and self-configurable intelligent components:
• The Authorized Channel Partner (ACP) program is open to wholesale, contract hardware distributors, and access control manufacturers
who sell ASSA ABLOY’s technology products to security systems integrators and locksmiths, and help with product selection based on the
application. The ACP is for resellers that do not install and service products.
• The Certified Integrator (CI) program provides hands-on training for security systems integrators and network administrators. Not only does
this training familiarize certified integrator candidates on product features and applications, it also gives them valuable experience installing,
commissioning, and troubleshooting the products in a real-world environment. This category extends to End Users that install and manage
their own systems and third party lock installers as well.
Overview and Features
Profile Series v.S2
1
1-800-727-5477 • www.sargentlock.com
Profile Series v.S2 Features & Benefits
Powering Options
• Six (6) AA batteries included for completely wireless applications
• Hard wiring is accomplished with a 3267 Remote Power Supply (sold
separately, see page 11) and ElectroLynx Hinge (sold separately)
S2 Proximity (125 kHz) Product
Accesses per
Door
With Comm
Session(s)/day
Batteries will last
approximately
Low Usage 60 /day 1 22 months
Medium Usage 120 /day 2 14 months
High Usage 300 /day 5 7 months
For more information on the qualifications for becoming an ACP or CI, contact your local ASSA ABLOY Door Security Solutions sales consultant for details.
Note: Higher security products such as iCLASS may experience a slight decrease in
battery life.
Features Benefits
Utilizes 802.11b/g wireless network infrastructure Cost-effective installations, no proprietary equipment required;
ideal for hard-to-wire locations
Integrated ANSI/BHMA Grade 1 hardware, available in:
10 Line Bored Lock; 8200 Series Mortise Lock; 80 Series Exit Device
Flexibility to support a variety of openings; industry leading Grade 1 hardware
offers the highest degree of physical security available in access control locks
Intelligence built into lock for local decision making Lock operates regardless of network status; supports up to 2,400 users
per lock and provides a 10,000 event transaction history/audit trail
Supports HID®125 kHz prox or 13.56 MHz iCLASS®credentials;
(26 - 39 bit) supports CSN reads for other common 13.56 MHz cards, including
MiFare, DesFire, and Felica
Integrates easily with existing credential systems
Full iCLASS®credential authentication Offers enhanced security through encryption and mutual authentication
Built-in door status monitoring and configurable alarm notifications Provides real-time alarms for immediate response
Weatherseal gasket and conduit included. Shroud available. Can be used on a variety of exterior doors
Open architecture design Facilitates integration with any access control system
Uses six AA batteries Easy, cost effective deployment and maintenance
Keypad option available Two-factor authentication offers enhanced security
90669:D 8/01/2013 Copyright © 2003, 2004, 2007-2013, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
FOR TRAINING PURPOSES ONLY
DATED MATERIAL

Product Features
Profile Series v.S2
90669:D 8/01/2013 Copyright © 2003, 2004, 2007-2013, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
“S2-PK” Proximity/Keypad or
“S2-IK” iCLASS/Keypad Products
The “S2-PA” (proximity only) and “S2-IA” (iCLASS-only)
configurations of networked access control products provide a
higher level of security by utilizing proximity or iCLASS credentials
only. The lock is programmed utilizing LMT or third party access
control (via SDK). This configuration is ideal for high traffic
applications where keypad usage is less desirable.
“S2-PA” Proximity Only or
“S2-IA” iCLASS®Only Products
The “S2-PK” (proximity/keypad) and “S2-IK” (iCLASS/keypad) versions
of networked access control products offers the highest level of security
and flexibility. Programming and security management is done utilizing
LMT or third party access control (via SDK). The “S2-PK” and “S2-IK” can
be programmed to require both proximity or iCLASS credentials and Pin
Code to gain entry or proximity /iCLASS only.
Exit Device shown Mortise shown
21-800-727-5477 • www.sargentlock.com
Hardware Features
• Lock holds 2,400 users and 10,000 events locally
• Available with key override
Proximity Credentials
• Supports all HID 125 kHz proximity formats up to 39 bits,
including Corporate 1000
• Also available with keypad option (PK) for two-factor
authentication
iCLASS Credentials
• Supports HID 13.56 MHz iCLASS®credentials (full
authentication, all formats) and CSN reads for other common
13.56 MHz credentials, including MiFare, DesFire, and Felica
• Also available with keypad (IK) for two-factor authentication
Environmental Specifications
• Operating temperature:
125 kHz proximity products: -40° F (-40°C) to 135° F (57°C)
13.56 MHz iCLASS products: -13°F (-25°C) to 151°F (66°C)
• Humidity: < 85% non-condensing
• Storage temperature: -22°F (-30°C) to 176°F (80°C)
HID and iCLASS are registered trademarks of HID Global Corporation.
Security
• Advanced data security with standard encryption techniques
• AES 128-bit encryption
• Supports most current WiFi network security standards.
For specific security information, please contact your local
ASSA ABLOY Door Security Solutions sales consultant or
call 800-810-Wire.
Software
• Lock Management Tool available for small installations
• To ensure quick and easy integration, our products are tested and
certified to work with access control software and systems from many
providers. Visit www.intelligentopenings.com for a complete list of
partners.
• Software Development Kits (SDK) and support available to integrate
into other third party access control systems. Call 800-810-WIRE for
assistance
FOR TRAINING PURPOSES ONLY
DATED MATERIAL

S2 8200 Series Mortise Locks
Profile Series v.S2
90669:D 8/01/2013 Copyright © 2003, 2004, 2007-2013, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
3
1-800-727-5477 • www.sargentlock.com
The motorized 8200 Mortise Lock Profile Series v.S2 one-piece escutcheon has a clean, crisp design and can be aesthetically complemented by SARGENT
Studio Collection and Coastal Series levers in a full array of finishes. The Profile Series v.S2 Mortise Locks offer network access control solutions for
business and facility entrances, computer room areas, telephone rooms, health clubs, and child care facilities. The Mortise Lock with deadbolt (82276,
82277) is an excellent choice for rest room doors providing privacy when the deadbolt is thrown.
Mechanical Features
•Certified to ANSI/BHMA A156.13 Series 1000 Operational Grade 1 and
Security Grade 1
•UL/ULC Listed for fire doors*
• FCC certified
•Windstorm & Florida Building Code information is listed on page 16
• Motor driven 8200 Series Mortise Lock
• 3/4" stainless steel, anti-friction reversible latch
• For 1-3/4" (44mm) thick door standard. Consult factory for
additional thicknesses
• Stainless steel non-handed deadlocking latch
• Not available with SC- or SE- options
• Handed, easily field reversible without disassembling lockbody
• Lever trim through-bolted for increased security and durability
•Batteries included
13-1/2"
(343mm)
3-3/4"
(95mm)
Outside Shown
Ordering Profile Series v.S2 Mortise Lock
Profile Series v.S2 Mortise Lock Functions
If the lock needs to have: Then select:
Series Type Function Technology
Prox and keypad
Key override and deadbolt S2 82 276 PK
Key override and no deadbolt S2 82 278 PK
Deadbolt and no key override S2 82 277 PK
No deadbolt and no key override S2 82 279 PK
Prox only
Key override and deadbolt S2 82 276 PA
Key override and no deadbolt S2 82 278 PA
Deadbolt and no key override S2 82 277 PA
No deadbolt and no key override S2 82 279 PA
If the lock needs to have: Then select:
Series Type Function Technology
iCLASS and keypad
Key override and deadbolt S2 82 276 IK
Key override and no deadbolt S2 82 278 IK
Deadbolt and no key override S2 82 277 IK
No deadbolt and no key override S2 82 279 IK
iCLASS only
Key override and deadbolt S2 82 276 IA
Key override and no deadbolt S2 82 278 IA
Deadbolt and no key override S2 82 277 IA
No deadbolt and no key override S2 82 279 IA
All v.S2 Mortise Functions feature:
• Trim outside rigid except when in “passage” mode or
valid user code entered
• Trim inside always retracts latch and deadbolt
• Guardbolt deadlocks latch
Cylinder Override Function Features:
• Key outside retracts latch and deadbolt when trim is
locked electronically
• Key override requires a size 43 cylinder standard or
removable core (1-3/8" [35mm] length of shell)
Deadbolt Function Features:
• Deadbolt monitoring
• When deadbolt thrown, outside lever operable only
with Emergency or Supervisor code
• 1" hardened stainless steel deadbolt
v.S2 Mortise Lock Functions
Options Series Type Function Technology Levers Finish Hand
Select from page 13-15 Select from S2 Mortise Lock Function
chart above PK, PA, IK, or IA Select lever and finish
from pages 6-8
RHR, LHR,
RH or LH
Example: S2-82276 PK G 03 RH
Inside/Outside Escutcheon
• Keys/buttons with double shot mold construction
prevents wear
• Zinc die cast
•Operating temperature
125 kHz proximity products:
-40° F (-40°C) to 135° F (57°C)
13.56 MHz iCLASS products:
-13°F (-25°C) to 151°F (66°C)
• LEDs indicate valid/invalid entries
• Projection at bottom 5/16"
(8mm) less lever
• Projection at top
1-5/8" (41mm)
* Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no represen-
tations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing
a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
FOR TRAINING PURPOSES ONLY
DATED MATERIAL

S2 10 Line Cylindrical Locks
Profile Series v.S2
90669:D 8/01/2013 Copyright © 2003, 2004, 2007-2013, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
41-800-727-5477 • www.sargentlock.com
The Profile Series v.S2 10 Line Cylindrical Lock is available with many lever designs including Coastal Series and 11 hardware finishes. Its unique design
provides uniformity when used with other SARGENT Cylindrical Locks at a facility. The Profile Series v.S2 products offer wireless access control solutions for
meeting rooms, country club locker rooms and assisted living facilities.
Inside Outside
v.S2 Cylindrical Locks
3-3/4"
(95mm)
14-1/4"
(362mm)
14-1/4"
(362mm)
3-3/4"
(95mm)
Escutcheons
• Zinc die cast
• Projection at bottom 11/16" (17mm) less lever
• Projection at top 1-5/8" (41mm)
•Tactile keypad
•Operating temperature
125 kHz proximity products: -40° F (-40°C) to 135° F (57°C)
13.56 MHz iCLASS products: -13°F (-25°C) to 151°F (66°C)
• LEDs indicate valid/invalid entries
•Keys/buttons with double shot mold construction
prevents wear
52-3893 Door Position Switch (DPS)
(included)
• SPDT concealed switch (2 wire)
• Metal Door adapter included
• 3/8" Diameter for wood door
• 3/4" Diameter for metal door
• Supplied with v.S2-10G77
• Key outside always retracts latch
• Lever outside rigid except when in
“passage” mode or valid user code entered
• Lever inside always retracts latch
• Guardbolt deadlocks latch
• Key override standard
• “Request-to-Exit (REX)” signaling
standard
• Door Position Switch (DPS,
P/N 52-3893) supplied
Note: The DPS is installed right above the
lock and connects directly into the lock’s
electronics
v.S2 Cylindrical Lock Functions
If the lock needs to have: Then select:
Series Type Function Technology
Prox and keypad
Key override S2 10 G77 PK
Prox only
Key override S2 10 G77 PA
If the lock needs to have: Then select:
Series Type Function Technology
iCLASS and keypad
Key override S2 10 G77 IK
iCLASS only
Key override S2 10 G77 IA
How to Order v.S2 Cylindrical Locks
Options Series Type Function Technology Levers Finish Hand
Select from page 13-15 Select from S2 Cylindrical Lock Function
chart above PK, PA, IK, or IA Select lever and finish
from page 6
RHR, LHR,
RH or LH
**28- S2-10G77 PK G 03 RH
**28- option supplies a 4-7/8" strike, opposed to the 2-3/4" T strike supplied standard
Mechanical Features
• Certified ANSI/BHMA A156.2 Series 4000 - Grade 1
• UL/ULC Listed for fire doors*
• FCC certified
• Windstorm & Florida Building Code information is listed on page 16
• Motor driven Cylindrical Lock
• Latch Stainless Steel, 1/2" (13mm) throw
• 2-3/4" (70mm) backset standard
• For 1-3/4" (44mm) thick door standard. Consult factory for other thicknesses
• Non-Handed lock body, levers may be handed (Specify RH, RHR, LH or LHR)
• Heavy duty lever spring return
• Steel mounting studs
• Not available with 10-UL-, 83-, 84- options
• Batteries included
* Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no represen-
tations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing
a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
FOR TRAINING PURPOSES ONLY
DATED MATERIAL

S2 80 Series Exit Devices
Profile Series v.S2
90669:D 8/01/2013 Copyright © 2003, 2004, 2007-2013, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
5
1-800-727-5477 • www.sargentlock.com
The Profile Series v.S2 products for the SARGENT Rim and Mortise Exit Devices provide networked access control in areas where life-safety is a primary
concern. This includes stairwell areas or tenant-occupied facilities.
Inside
9"
(228mm)
Outside
8-3/4"
(222mm)
3-3⁄4"
(95mm)
1-13⁄16"
(46mm)
Outside ET Lever Control
•Cast escutcheon
•Projection
13/16" (21mm)
• For Rim Exit
Devices:
777-8 (cylinder hole)
778-8 (no cylinder hole)
• For Mortise Exit
Devices:
777 (cylinder hole)
778 (no cylinder hole)
8-1/16"
(205mm)
ETL Shown
Mechanical Features
• Certified ANSI/BHMA A156.3 Grade 1
• UL/ULC Listed for fire doors*
• FCC certified
• Windstorm & Florida Building Code information is listed on page 16
• Motor-driven ET trim
• Latch 3/4" (19mm) throw (stainless steel 8800, anti-friction brass 8900)
• For 1-3/4" (44mm) door standard. Consult factory for other thicknesses
• Batteries included
Proximity Only
Shown
3-3/4"
(95mm)
Escutcheons
• Zinc die cast
• Projection at top
1-5/8" (41mm)
• Operating temperature –
125 kHz proximity products:
-40° F (-40°C) to 135° F (57°C)
13.56 MHz iCLASS products:
-13°F (-25°C) to 151°F (66°C)
• LEDs indicate valid/invalid entries
• Keys/buttons with double shot
mold construction prevents wear
52-3893 Door Position Switch (DPS)
(included)
• SPDT concealed switch (2 wire)
• Metal Door adapter included
• 3/8" Diameter for wood door
• 3/4" Diameter for metal door
• Supplied with v.S2 Exit Devices
All S2 Exit Devices feature:
• Always allows free egress
• Key outside retracts latch (8877 and 8977)
• Outside lever rigid except when in passage
mode or valid user code entered
• Door Position Switch (DPS, P/N 52-3893)
supplied
Note: The DPS is installed right above the lock
and connects directly into the lock’s electronics
Cylinder Override features:
• Cylinder override for 8877 is a 34 rim cylinder;
for 8977 is a 46 Mortise cylinder (1-3/4" length)
17-3/8"
(441mm)
17"
(431mm)
17-3/8"
(441mm) 17"
(431mm)
S2-8900 Mortise
Exit Devices
S2-8800 Rim
Exit Devices
Options Series Technology Type Function Rail Size ET Trim/Lever Finish Hand Door Width
Select from
pages 13-15
Select from S2 Exit Device
Function chart above
E: 24 - 32"; F: 33 - 36";
J: 37 - 42"; G: 43 - 48"
ET followed by lever
designation from
pages 6 & 7
Select from
pages 6-8
RHR or
LHR
If supplied,
rails will be
cut to size
Example: S2-PK-8878 F ETL 10B RHR 36"
Mortise Lock Exit Rim Exit
If the lock needs to have: Then select: Then select:
Series Technology Type Function Series Technology Type Function
Prox and keypad
Key override S2 PK 89 77 S2 PK 88 77
No key override S2 PK 89 78 S2 PK 88 78
Prox only
Key override S2 PA 89 77 S2 PA 88 77
No Key override S2 PA 89 78 S2 PA 88 78
iCLASS and keypad
Key override S2 IK 89 77 S2 IK 88 77
No key override S2 IK 89 78 S2 IK 88 78
iCLASS only
Key override S2 IA 89 77 S2 IA 88 77
No Key override S2 IA 89 78 S2 IA 88 78
* Any retrofit or other field modification to a fire rated opening can potentially impact the fire
rating of the opening, and Sargent Manufacturing Company makes no representations or
warranties concerning what such impact may be in any specific situation. When retrofitting any
portion of an existing fire rated opening, or specifying and installing a new fire-rated opening,
please consult with a code specialist or local code official (Authority Having Jurisdiction) to
ensure compliance with all applicable codes and ratings.
FOR TRAINING PURPOSES ONLY
DATED MATERIAL

Standard and Coastal Series Levers,
Finishes and Handing
Profile Series v.S2
90669:D 8/01/2013 Copyright © 2003, 2004, 2007-2013, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
61-800-727-5477 • www.sargentlock.com
Profile Series v.S2 products are available with the following identified lever designs to provide uniformity throughout a facility. Lever projection
from door surface varies with lock type. S2 mortise locks and cylindrical locks are specified by the technology (PA, PK, IA, or IK) followed by the
lever designation (e.g., PAL). S2 Exit devices are specified by the ET designation followed by the lever designation (e.g., ETP).
ET Lever Controls for Exit Devices
13/16"
(21mm)
1-13/16"
(46mm)
8-1/16"
(205mm)
3-9/16" MAX
(90mm)
The 700 Series ET and Lever Control is the
external trim with all v.S1 80 Series
Exit Devices
ET Escutcheons and levers are plated brass
Stainless steel levers are available
Finishes
SARGENT offers many different finishes for v.S1 products. Please reference the chart below for
finishes available.
Standard and Coastal Levers
Handing
Left Hand Door
LH
Outside
Right Hand Door
RH
Outside
Right Hand Reverse Door
Outside
RHR
LHR
Outside
Left Hand Reverse Door
‡ ET Trim will be supplied with the requested finish, the Exit Devices will be supplied in 32
or 32D accordingly
∞ Only available with exit devices, the external trim will be supplied in 26 or 26D accordingly
Finishes ANSI Mortise
Locks
Cylindrical
Locks
Exit
Devices
03 Bright brass 605 X X X
04 Satin brass 606 X X X
09 Bright bronze 611 X X X
10 Satin bronze, clear powder 612 X X X
10B Oxidized satin bronze oil rubbed 613 X X X
10BL Oxidized satin bronze, clear power coat – X X X
14‡ Bright nickel, clear coated 618 X X X
15‡ Satin nickel, clear coated 619 X X X
20D Dark statuary bronze, clear powder coat – X X X
26‡ Bright chrome 625 X X X
26D‡ Satin chrome 626 X X X
32∞ Bright stainless steel 629 – – X
32D∞ Satin stainless steel 630 – – X
Standard Levers
Lever Design Handed Mortise
Locks
Cylindrical
Locks
Exit
Devices
AYes X X
B– X X X
E– X X
F– X X
J– X X X
L– X X X
P– X X X
W– X X
Coastal Levers
Lever Design Handed Mortise
Locks
Cylindrical
Locks
Exit
Devices
C– X X
GYes X X X
R– X X
SYes X X
YYes X X X
FOR TRAINING PURPOSES ONLY
DATED MATERIAL

Studio Collection Levers
Profile Series v.S2
90669:D 8/01/2013 Copyright © 2003, 2004, 2007-2013, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
7
1-800-727-5477 • www.sargentlock.com
Studio Collection Levers are available with the 8200 Series Mortise Locks. With Exit Device, the Studio Collection is available with the ET trim creating
uniformity throughout a facility.
* Lever returns within 1/2" (13mm) of door face
** Gramercy levers are customized. Refer to page 8 for ordering information.
*** Contact factory for current lead times
Studio Collection Levers are available with the 8200 Series Mortise Locks. With Exit Devices the Studio Collection is available with the ET trim creating
uniformity throughout a facility.
Notting Hill Series
Lever Design Handed Mortise
Locks
Exit
Devices
MA*** Yes X X
MQ Yes X X
MT Yes X X
MM Yes X X
MR*** Yes X X
MY* Yes X X
Centro Levers
MC*** – X X
MD – X X
MJ
– X X
MP – X X
ND* – X X
NJ* – X X
Aventura Series
Lever Design Handed Mortise
Locks
Exit
Devices
MB – X X
ME – X X
MF – X X
NF*
– X X
MG – X X
MI – X X
NI* – X X
MW* – X X
Gramercy Levers**
RCM – X X
RAL
– X X
REM – X X
RAM – X X
RAS – X X
RAW – X X
RAG – X X
RGM – X X
Rialto Series
MO Yes X X
MZ* Yes X X
Odeon Series
MN Yes X X
MH Yes X X
MK Yes X X
MS Yes X X
MU Yes X X
MV Yes X X
NS* Yes X X
NU* Yes X X
MX* Yes X X
FOR TRAINING PURPOSES ONLY
DATED MATERIAL

81-800-727-5477 • www.sargentlock.com
Ordering Gramercy
Series Levers
Profile Series v.S2
90669:D 8/01/2013 Copyright © 2003, 2004, 2007-2013, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
Options Series Function Technology Lever Finish Hand
select from
pages 12-14 N2-82 select from
page 3
IA, IK,
PA or PK
Leather
insert Bright stainless steel with brown leather RHR, RH, LHR,
or LH
10- N2-82 276 IA RAL 29BN RH
How to Order: Profile Series v.S2 Mortise Locks with Gramercy Levers
Options Series Technology Type Functions Rail Size Trim &
Lever Finish Hand Inside Finish Door Width
select
from
pages
12-14
Select from Exit Device Function
chart from page 5
E, F,
J or G
Leather
insert
Bright stainless
steel with
brown leather
RHR or
LHR
select
from
page 7
If supplied,
rails will be
cut to size
10- N2- IA 89 77 F ET RAL 29BN RHR 32D 36"
How to Order: Profile Series v.S2 Series Exit Devices with Gramercy Levers
Gramercy Series Levers
REM, RGM RCM RAG, RAL, RAM, RAS, RAW
Lever Designation Lever Description Available Finishes (AS ORDERED)
RAG Grooved Insert 2929 or 3030
RAL Leather Insert 29BK, 29BN or 30BK, 30BN
RAM Metallic Insert 2930** only
RAS Santoprene Insert 29BK or 30BK
RAW Wood Insert 29BH or 30BH
RCM Raised Band 2929, 3030 or 2930**
REM Plain 2929 or 3030
RGM Two Grooves 2929 or 3030
BHMA Finish SARGENT Finish Gramercy Code* Description
630 32D 30 Satin Stainless Steel
629 32 29 Bright Stainless Steel
N/A N/A BH Birch (wood insert)
N/A N/A BK Black (Santoprene™ or leather insert)
N/A N/A BN Brown (leather insert)
**Two-tone finish - grip of lever is 32D, balance of lever is 32.
*Code used to specify Gramercy Series finishes only. Use available finishes list to specify desired finish when ordering.
To order Gramercy Series levers with SARGENT products, see the examples below. When specifying finish, use the last two digits of the BHMA standard
finish code, i.e. use “29” for polished stainless, BHMA finish 629.
Gramercy Finish Codes
Gramercy Lever Descriptions & Available Finishes
FOR TRAINING PURPOSES ONLY
DATED MATERIAL

9
1-800-727-5477 • www.sargentlock.com
Lock Management Tool
Profile Series v.S2
90669:D 8/01/2013 Copyright © 2003, 2004, 2007-2013, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
• Password protected database
• User database size based on local hardware configuration
• Allows for creation of user groups
• Easy to follow data entry
• Real-time clock with date and time
• Sixteen different time zones
• Holiday support
• Auto-unlock schedule with or without “first in” unlock
• Allows viewing of system wide events and history (total number of events based on local
hardware configuration)– includes event type, date, time, user ID and name
• Configurable for all major HID Prox 125 kHz or iCLASS 13.56 MHz card formats
• Scheduler utility to establish lock communication at pre-defined intervals
• User manual included
• Browser-based user interface
• Simple drag-and-drop configurations
• Basic alarm monitoring
Please note that LMT does not support lockdown or door status information.
Lock Management Tool
Lock Management Tool™ allows programming, interrogation and overall management from a centralized location for up to 25 doors. The application
facilitates communication from a computer to the v.S2 WiFi locks via 802.11b/g wireless infrastructure. Lock Management Tool is a program that allows
an administrator to establish multiple user types, time zones, holidays, user groups, auto-unlock periods and to obtain transaction history from all locks
connected to the system. The Lock Management Tool consists of a server based installation (a small workstation will be sufficient) with most of the daily
administration and configuration being done through a web browser. A local client on the server can be used for more complex configuration tasks.
Hardware
• Memory: 2 GB minimum, 4 GB+ recommended
• Storage: 20 GB free hard disk space
• Processor: Dual Core/(min Pentium IV w/HT) @ 2GHz (or equivalent) or faster
• Screen: 800 x 600 required; 1024 x 768 Recommended
• Network Card required
• CD-ROM required
• RS232 Serial Port (DB9)
Operating System:
• Windows XP 32bit, Server 2003 32bit, Vista 32/64bit, Windows 7 32/64bit, or Windows Server 2008/2008R2
Note: IP address must be assigned by authorized network administrator and PC must utilize a static IP address
Lock Management Tool (P/N WFCD2) Features
Hardware and Software Requirements
SARGENT Profile Series IP locks are managed by a range of access control and security systems. For more information on which systems support
SARGENT IP LOCKS, please contact your local ASSA ABLOY Door Security Solutions office, www.assaabloydss.com. To learn more about how to integrate
these and other ASSA ABLOY products with your system, please call 800-810-WIRE.
Integration Tools for ASSA ABLOY Locks
FOR TRAINING PURPOSES ONLY
DATED MATERIAL

Credential Features
• 26 & 33 bit Wiegand format available (consult factory for additional formats)
• HID®Prox 125 kHz-based proximity cards, fobs or tags
• Allows integration into existing facilities with HID Prox 125kHz-based technology
• SARGENT standard credentials are 26 Bit Wiegand format, Site Code and Proximity ID assigned by SARGENT
• Custom credentials available with customer assigned Prox ID#’s
Below are 125 kHz proximity credentials offered by SARGENT. Other credentials (125 kHz proximity and 13.56 MHz iCLASS, 26-39 bit formats) can be
purchased from HID.
Product # Features Image
PCH-L70
for SARGENT
logo on card
SARGENT HID ProxCard II™
• Site Code and Proximity ID#’s determined and controlled by SARGENT
• 26 Bit Format, HID Coded Wiegand Output 125kHz
• Dimensions: 2-1/8" x 3-3/8" (54mm x 86mm)
• Thickness: .070" nom. (1.8mm)
• Cards ordered individually*** (Min. Order is 25 Cards)
PCH-B70
for blank
white card
PCH-L30
for SARGENT
logo on card
ISO Prox Card II™ (Printable Card)
• Site Code and Proximity ID#’s determined and Controlled by
• 26 Bit Format, HID Coded Wiegand Output 125kHz
• Dimensions: 2-1/8" x 3-3/8" (54mm x 86mm)
• Thickness: .031" nom. (1.8mm)
• Blank Cards can be printed on by others
• Cards ordered individually*** (Min. Order is 25 Cards)
PCH-B30
for blank
white card
Contact
Factory for
specifications
options and
pricing
DuoProx™ Card
• Multiple Technology Proximity Cards - DuoProx™– dual technology -
proximity & magnetic stripe
• DuoProx™ cards with unique site codes for higher level of security (SARGENT 1000) are available
• Cards ordered individually*** (Min order is 100 Cards)
The MicroProx™ Tag is a coin-sized (disk-shaped) transponder that provides the ability to add HID proximity
technology to a device. The MicroProx™ Tag has an adhesive backing which allows it to be secured to any
non-metallic object.
• Easily Secured To: Employee badges, PDAs, Magnetic stripe cards, Cell phones
• 26 Bit Format, HID Coded Wiegand Output 125kHz • Gray color with HID Logo
• Proximity ID# marked on each Tag • Dimensions: 1.285" Dia. x 0.070" (32.6mm x 1.78mm)
MPT
- Site Code and Proximity ID#’s determined and controlled by SARGENT
- MicroProx™ Tag ordered individually***
- Min. order is 25 MicroProx™ Tag
NOTE: The
MicroProx™ Tag
should be attached to
magnetic stripe cards
so that contact with
the magnetic card
reader is avoided.
MPT-C
- Site Code and Proximity ID#’s requested by customer
- MicroProx™ Tag ordered individually***
- MicroProx Tag with custom Site Code, consult factory for minimum quantities
PF
PF SARGENT ProxKey II™
• Site Code and Proximity ID#’s determined and controlled by SARGENT
• 26 Bit Format, HID Coded Wiegand Output 125kHz
• Dimensions: 1-29/32" x 29/32" x 11/32" (48mm x 23mm x 9mm)
• Includes Keyring
• SARGENT ProxKey II™ ordered individually*** (Min order is 25 ProxKey II™)
PF-C
PF-C Custom ProxKey II™
• Site Code - requested by customer PF-C
• Proximity ID#’s requested by customer
• 26 Bit Format, HID Coded Wiegand Output 125kHz
• Dimensions: 1-29/32" x 29/32" x 11/32" (48mm x 23mm x 9mm)
• Includes Keyring
• PF-C Custom ProxKey II™ ordered individually*** (Min order is 100 Custom ProxKey II™)
1000
*** Products are ordered individually, Ordered Quantity is the number of individual items to be shipped. If a Qty of 25 is ordered -
25 individual items will be shipped
(Note: Min Order Requirements)
10 1-800-727-5477 • www.sargentlock.com
90669:D 8/01/2013 Copyright © 2003, 2004, 2007-2013, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
Access Credentials
Profile Series v.S2
FOR TRAINING PURPOSES ONLY
DATED MATERIAL

11
1-800-727-5477 • www.sargentlock.com
Profile Series v.S2
Accessories and Software
90669:D 8/01/2013 Copyright © 2003, 2004, 2007-2013, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
52-0256 Gel Cell Battery
• Optional for 3267 Remote Power supply
• Provides continuous operation of Profile Series v.S2 in the event of
a power failure
• 12VDC 1.2 AH rating
• 10,000 cycles typical in the event of power failure
3267 Remote Power Supply
• The Hard Power option (91-) is recommended for high
traffic doors and multiple daily communication
sessions
• Provides a filtered and regulated 9VDC remote power
for Profile Series v.S2 locks
• Each unit can supply power to (1) Profile Series
product**
• Optional 12VDC Gel Cell battery allows for operation in the event of a power
failure (Strongly recommended for applications without cylinder over-ride to
prevent lock-out)
• Requires Manufactured door with ElectroLynx or retrofit harnesses
through door (see p.11) & ElectroLynx Hinge*
Reference template list below for correct raceway preparation:
4540 – Bored Lock
4541 – Mortise Lock
4542 – Rim and Mortise Exits
Includes:
• Plug-In Wall Transformer (52-0255) and (52-0258) 12’ (3.6m) of shielded
wire for connection between power transfer and power supply.
(Maximum length of 50’ (15.2m) recommended)
* Recommended for new opening. Retrofit application may require surface
mounted wire mold and transfer loop by others.
**Note: S2 lock controller requires (6) AA batteries (P/N 01-0898) even when hard
powered
3267 Replacement Parts
52-0255 Plug-In Wall Transformer
• Output 16.5 VAC, 2.4 Amps
• UL/cUL Listed
• Provides input power to
Model 3267 Remote Power supply module
52-0258
• Cable Assembly-Power Supply
to Power Transfer
• 12’ (3.6m) shielded cable
52-2498
• 9VDC, 700 ma Power Supply circuit
board
• Replacement circuit board
assembly
52-3852 v.S Adapter Cable
•Included with v.S1
• For DPS monitoring features
• Compatible with ElectroLynx®system
52-3893 Door Position Switch (DPS)
• SPDT concealed switch (2 wire)
• Metal Door adapter included
• 3/8" Diameter for wood door
• 3/4" Diameter for metal door
• Supplied with v.S1 Exit Devices
and Bored Locks
WFCD2 Lock Management Tool (LMT) CD*
• Lock Management Tool™ allows programming,
interrogation and overall management from a
centralized location of up to 25 doors
• License is included and is obtained at time of
installation
• Kit Contains:
- LMT software
- Users’ manual (on CD)
WFCD3 Lock Management Tool (LMT) CD*
• Lock Management Tool™ allows programming, interrogation
and overall management from a centralized location of up to
50 doors
• License is included and is obtained at time of installation
• Kit Contains:
- LMT software
- Users’ manual (on CD)
* The Network and Lock Configuration CD Tool Kit (WFCD1)
is required to set up v.S2 locks. The Lock Management Tool
(WFCD2) is required ONLY if third-party access control software
is not being used. Only one of each is required per system.
WF001 - iCLASS Reader Configuration Cards Pack
Includes four (4) cards for field configuration of reader
- iCLASS Configuration Card
- iCLASS Hard-Powered/PoE Configuration Card
- CSN Configuration Card
- CSN Hard-Powered/PoE Configuration Card
- Included with WFCD1
WFCD1 Network And Lock Configuration
CD Tool Kit*
• At least one kit required per site. Allows for connection to
and configuration of v.S2’s network interface, as well as initial
install settings.
Contains:
- NCT/LCT software
- Serial adapter
Cable (P/N 52-3956)
- Users’ manual
(on CD)
- Quick start guide
- Configuration cards
(to configure 13.56 MHz locks)
FOR TRAINING PURPOSES ONLY
DATED MATERIAL

12 1-800-727-5477 • www.sargentlock.com
Profile Series v.S2
90669:D 8/01/2013 Copyright © 2003, 2004, 2007-2013, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
52-2593 Protective Shroud
• Provides weather protection for
outside escutcheon
• Cover and hinge molded of tough
polycarbonate
• Stainless steel torsion spring maintains cover in
closed position
• Easily lifts for access to keypad
• Comes with mounting hardware and gasket
• Fast, easy installation
• Order separately
52-2847 Conduit
• Provides weather protection inside of door
• Constructed of durable ABS material
• For non-fire rated exterior applications only
• Included with product
82-0500
For use with
8200 Mortise
Escutcheon
68-1400
For use with
8800 or 8900
Exit
Escutcheon
Weatherseal Gasketing
52-0263
For use with
ET Trim
10-0469
For use with
10G77
Bored
Escutcheon
• Provides sealing between outside escutcheon and door for
exterior applications
• Gasketing (included) recommended for non-fire rated
exterior applications
ElectroLynx hinges and harnesses required for
hard-powered v.S2 applications are available
through McKINNEY.
Accessories
Keypad Assembly
52-2432 or 52-4423 52-2431 or 52-4422 52-4425
• Assemblies include circuit board and housing
• Batteries not included
Controller
Assembly Product
Keypads S2-IA (iCLASS only) 52-4422
S2-IK (iCLASS with keypad) 52-4423
S1/S2-PA (prox only) 52-2431
S1/S2-PK (prox with keypad) 52-2432
Controllers S2-IA/IK/PA/PK (iCLASS or prox) 52-4425
FOR TRAINING PURPOSES ONLY
DATED MATERIAL

13
1-800-727-5477 • www.sargentlock.com
Profile Series v.S2
90669:D 8/01/2013 Copyright © 2003, 2004, 2007-2013, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
Mechanical Options &
Shipping Information
Lock Shipping Weight Pc. Count/Carton
S2-82276-PK x lever trim (with cylinder) 11.2 lbs (5.1kg) 1/carton
S2-82277-PK x lever trim (no cylinder) 10.7 lbs (4.9kg) 1/carton
S2-82278-PK x lever trim (with cylinder no deadbolt) 11.2 lbs (5.1kg) 1/carton
S2-82279-PK x lever trim (w/o cylinder no deadbolt) 10.7 lbs (4.9kg) 1/carton
S2-PK8877 21.0 lbs (9.5kg) 1/carton
S2-PA8977 23.0 lbs (10.4kg) 1/carton
S2-10G77-PKL 10.7 lbs (4.9kg) 1/carton
S2-82276-IK x lever trim (with cylinder) 11.2 lbs (5.1kg) 1/carton
S2-82277-IK x lever trim (no cylinder) 10.7 lbs (4.9kg) 1/carton
S2-82278-IK x lever trim (with cylinder no deadbolt) 11.2 lbs (5.1kg) 1/carton
S2-82279-IK x lever trim (w/o cylinder no deadbolt) 10.7 lbs (4.9kg) 1/carton
S2- IK8877 21.0 lbs (9.5kg) 1/carton
S2-IA8977 23.0 lbs (10.4kg) 1/carton
S2-10G77- IK 10.7 lbs (4.9kg) 1/carton
Shipping Information
Mechanical Options:
Add Strength 3- Stainless steel hubs for institutional specifications (mortise locks only)
Fire Rated 12- UL Fire Label Exit hardware (exit devices only, not available with 16- & HK-)
Cylinder Dogging 16- Cylinder lockdown (non-fire rated exit devices only)
LD- Less hex key dogging (non-fire rated exit devices only)
Less Touch Pad 19- Pushbar without Lexan touchpad (exit devices only)
Strike Options
23- 4-7/8" (124mm) ANSI flat lip strike (8900 mortise lock exit device & mortise locks only)
28- 4-7/8" Strike #808. Lip length 1-1/4 (10 line only)
OBS- Open Back Strike (for 82278 & 82279 only)
WBS- Wrought Box Strike (Not available for 8800 series)
10 Line Backset
Options
23- 3-3/4" Backset x 2-1/4" x 1-1/8" Front (10 Line only)
25- 5" Backset x 2-1/4" x 1-1/8" Front (10 Line only)
Security Fasteners 36- Six lobe security head screws
37- Spanner head screws
3/4" Latch Throw 41- 3/4" (19mm) throw latch x 2-3/4" (70mm) backset (10 Line only)
Flush End cap 43- Flush End Cap (exit devices only)
Tactile Warning
Options
75- Tactile Warning - Milled Inside Lever (Not available with Exit Devices, Studio & Coastal Levers and the A Lever)
76- Tactile Warning - Milled Outside Lever (Not available with Studio & Coastal Levers and the A Lever)
77- Tactile Warning - Milled Inside & Outside Lever
(Not available with Exit Devices, Studio & Coastal Levers and the A Lever)
85- Tactile Warning - Abrasive Coating on Inside Lever (or Push Rail for Exits)
86- Tactile Warning - Abrasive Coating on Outside Lever
87- Tactile Warning - Abrasive Coating on Outside Lever
Finish Protection CPC- Clear Powder Coat (Available for 26, 26D, 32 & 32D Finishes)
SG- MicroShield®antimicrobial clear powder coat (Not available with 10B Finish)
SARGuide PL- SARGuide™ PL – Photoluminescent Coated Push Rail – (Touchpad eliminated) (Not available 75-, 77 & TL-)
Windstorm
Options
HC- Hurricane Code (rim exit devices only, see page 16 for details)
WS- Windstorm Rated (rim & mortise lock exit devices only, see page 16 for details)
Electrical Options 91- Power/Remote Unlocking wiring harness
To order options listed below, list the alpha or numerical code before the product model number
FOR TRAINING PURPOSES ONLY
DATED MATERIAL

14 1-800-727-5477 • www.sargentlock.com
Cylinder Options
Profile Series v.S2
90669:D 8/01/2013 Copyright © 2003, 2004, 2007-2013, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
Cylinder Options:
Conventional
Cylinder —SARGENT Conventional Cylinders supplied Standard (Nomenclature not required)
Signature Key
System
10- SARGENT Signature Key System (Not Available with other Key Systems)
10-21- SARGENT Signature Construction Key System (Lost Ball)
10UL-SARGENT Signature UL437 Key System (Not Available with 10 Line or other Key Systems)
Signature:
Large Format
Interchangeable
Core
(Removable Core)
10-63- SARGENT Signature LFIC (Removable Core) Cylinder
XC- Key System 11- XC Key System (not available with 10-, 10UL, 22- options)
11-21- XC- Construction Key System (Lost Ball)
XC- Large Format
Interchangeable
Core
(Removable Core)
11-60- Hardware to accept XC- Permanent LFIC (Removable Core), Disposable plastic Core- provided
11-63- Hardware provided with XC- LFIC (Removable Core) Cylinder - (Includes masterkeying, grand masterkeying)
11-64- Hardware provided with Keyed construction core to accept XC- LFIC (Removable) Permanent Core (ordered separately)
XC- Small Format
Interchangeable
Cores
11-70-7P- Hardware to accept XC- SFIC ( 7 Pin) XC- Permanent Cores, plastic disposable core provided (10 line J lever not available)
11-72-7P- Hardware to accept XC- SFIC (7-Pin Keyed Construction Core provided) cylinder Permanent core ordered separately
(10 Line J lever not available)
11-73-7P-Hardware supplied with XC- Small Format 7-Pin interchangeable core (Includes masterkeying, grand masterkeying)
(10 Line J lever not available)
11-65-73-
7P-
Hardware provided to accept XC- Uncombinated 7-Pin SFIC (Permanent) Core - (Packed Loose)
(10 Line J lever not available)
Construction
Key Systems
21- SARGENT Lost Ball Construction Keying for Conventional, XC and Signature Series (N/A with 63-, 73-, 82-, SC- & SE-)
22-SARGENT Construction Split Key System for Conventional Cylinders (Existing Systems)
(N/A with 10-, 11-, 63-, 73-, 82-, SC- & SE-)
Old Style
Removable Core
51- Removable Core Cylinder (Old Style) provided (Existing Systems Only)
52- Removable Construction Core (Old Style) Permanent core ordered separately (Existing Systems Only)
Large Format
Interchangeable
Core
(Removable Core)
60- Hardware to accept SARGENT Permanent LFIC (Removable Core), Disposable plastic Core provided
(Permanent Cores Ordered Separately)
63- Hardware provided with LFIC (Removable Core) Cylinder - (Includes masterkeying, grand masterkeying)
64- Hardware provided with Keyed construction core to accept LFIC (Removable) Permanent Core (ordered separately)
Small Format
Interchangeable
Cores
70- Hardware to accept 6 or 7-Pin SFIC Permanent Cores, plastic disposable core provided (10 Line J lever not available)
72- Hardware to accept 6 or 7-Pin SFIC (Keyed Construction Core provided) Cylinder (Permanent Core Ordered
Separately) (10 line J lever not available)
73- Hardware supplied with 6-Pin SFIC (Includes masterkeying, grand masterkeying) (10 Line J lever not available)
65-73- Hardware provided to accept Uncombinated 6-Pin SFIC (Permanent) Core - (Packed loose for field keying)
(10 Line J lever not available)
65-73-7P- Hardware provided to accept Uncombinated 7-Pin SFIC (Permanent) Core - (Packed loose for field keying)
(10 Line J lever not available)
73-7P- Hardware supplied with Small Format 7 Pin Interchangeable Core (Includes masterkeying, grand masterkeying)
(10 Line J lever not available)
To order options listed below, list the alpha or numerical code before the product model number
FOR TRAINING PURPOSES ONLY
DATED MATERIAL

15
1-800-727-5477 • www.sargentlock.com
Cylinder Options
Profile Series v.S2
90669:D 8/01/2013 Copyright © 2003, 2004, 2007-2013, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
Keso &
Keso F1
81-Hardware provided with housings to accept Keso (83) & Keso F1 (F1-83-) removable cores (Not available with
10 Line) (Permanent Cores Ordered Separately)
82- Hardware provided with SARGENT Keso Security Cylinder
F1-82- Hardware provided with SARGENT Keso F1 Security Cylinder (Patented)
83- Hardware supplied with SARGENT Keso Security Removable Core cylinder (Not available with 10 Line)
F1-83- Hardware supplied with SARGENT Keso F1 Security Removable Core cylinder (Not available with 10 Line) (Patented)
84- Hardware provided with SARGENT Keso Construction Cores (Not available with 10 Line)
(Permanent Cores ordered separately)
Cylinder Options:
To order options listed below, list the alpha or numerical code before the product model number
Bump Resistant BR- Bump Resistant Cylinder (Available with Conventional & Conventional XC Cylinders Only)
Less Cylinder LC- Hardware supplied less cylinder
Accepts Schlage
Cylinders
30- 10 Line Lever to accept Schlage Cylinder-Cylinder is not provided (10 Line only)
SF- L Lever to accept Medeco KeyMark Large Format
Interchangeable and Schlage Full Size Interchangeable Core (10 Line only)
Schlage Keyways
SC- Schlage C keyway cylinder, 0 bitted (10 Line only)
SE- Schlage E keyway cylinder, 0 bitted (10 Line only)
Note: For V-10 Cylinders and information, contact ASSA, Inc. @ 800-235-7482
FOR TRAINING PURPOSES ONLY
DATED MATERIAL

16 1-800-727-5477 • www.sargentlock.com
Windstorm Certifications: UL Listed
& Florida Building Codes
Profile Series v.S2
90669:D 8/01/2013 Copyright © 2003, 2004, 2007-2013, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
S2-10 Line cylindrical locks are
UL Certified and Listed on the Florida Building Code Website as stated:
S2-8200 Series mortise locks are
UL Certified and Listed on the Florida Building Code Website as stated:
• UL Listed per ANSI/SDI-BHMA A250.13
• ANSI/ASTM E330-2002
• ANSI/ASTM E1886-2005
• ASTM E1996-2009
• Testing Application Standard (TAS) 201-1994*
• Testing Application Standard (TAS) 202-1994*
• Testing Application Standard (TAS) 203-1994*
* published in the “Florida Building Code”
• UL Certification Directory ZHEM.R21744 Latching Hardware
• UL Certification Directory ZHLL.R21744 Windstorm-rated Assemblies
• Listed on Florida Building Code Website: FL6728-R1
• Listed on Florida Building Code Website: FL4351-R1
• UL Listed per ANSI/SDI-BHMA A250.13
• ANSI/ASTM E330-2002
• ANSI/ASTM E1886-2005
• ASTM E1996-2009
• Testing Application Standard (TAS) 201-1994*
• Testing Application Standard (TAS) 202-1994*
• Testing Application Standard (TAS) 203-1994*
* published in the “Florida Building Code”
• UL Certification Directory ZHEM.R21744 Latching Hardware
• UL Certification Directory ZHLL.R21744Windstorm-rated Assemblies
• Listed on Florida Building Code Website: FL6728-R1
• Listed on Florida Building Code Website: FL4351-R1
S2-HC8800 rim exit devices are
UL Certified and Listed on the Florida Building Code Website as stated:
• S2-HC8800 for single and double door applications; 8-0 max opening
• UL Listed per ANSI/SDI-BHMA A250.13
• ANSI/ASTM E330-2002
• ANSI/ASTM E1886-2005
• Testing Application Standard (TAS) 201-1994*
• Testing Application Standard (TAS) 202-1994*
• Testing Application Standard (TAS) 203-1994*
* published in the “Florida Building Code”
• UL Certification Directory ZHEM.R21744 Latching Hardware
• UL Certification Directory ZHLL.R21744 Windstorm-rated Assemblies
• Listed on Florida Building Code Website: FL2998-R2
S2-WS8800 rim exit devices are
UL Certified and Listed on the Florida Building Code Website as stated:
• S2-WS8800 for Single Hollow Metal 1-3/4" Thick Doors applications,
3'0" x 7'0" Max. Door with 6" Min Stile
• UL Listed per ANSI/SDI-BHMA A250.13
• ANSI/ASTM E330-2002
• ANSI/ASTM E1886-2005
• ASTM E1996-2009
• Testing Application Standard (TAS) 201-1994*
• Testing Application Standard (TAS) 202-1994*
• Testing Application Standard (TAS) 203-1994*
* published in the “Florida Building Code”
• UL Certification Directory ZHEM.R21744 Latching Hardware
• Listed on Florida Building Code Website: FL4351-R1
S2-WS8900 mortise lock exit devices are
UL Certified and Listed on the Florida Building Code Website as stated:
• S2-WS8900 available for Single Hollow Metals Doors applications
for 1-3/4" Thick door, 3'0" x 7'0" Max. Door with 6" Min Stile
• UL Listed per ANSI/SDI-BHMA A250.13
• ANSI/ASTM E330-2002
• ANSI/ASTM E1886-2005
• ASTM E1996-2009
• Testing Application Standard (TAS) 201-1994*
• Testing Application Standard (TAS) 202-1994*
• Testing Application Standard (TAS) 203-1994*
* published in the “Florida Building Code”
• UL Certification Directory ZHEM.R21744 Latching Hardware
• Listed on Florida Building Code Website: FL4351-R1
SARGENT Manufacturing offers a wide variety of products that meet building codes requiring hurricane, windstorm and FEMA certifications. SARGENT
products are tested to meet the requirements of the most severe building codes as specified by the Florida Building Code, Miami Dade Code
Requirements and in the International Building Code. Listed below are certifications and the standards met by these products.
FOR TRAINING PURPOSES ONLY
DATED MATERIAL

17
1-800-727-5477 • www.sargentlock.com
Architectural Specifications
Profile Series v.S2
90669:D 8/01/2013 Copyright © 2003, 2004, 2007-2013, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
B. Profile v.S2 8200 Series Mortise Locksets
C. Profile v.S2 8800/8900 Series Rim and Mortise Exit Devices
Intelligent WiFi Access Control
Bored Locks
1. WiFi Access Control Bored
Locks to be 10-Line Series
as manufactured by Sargent
Manufacturing of New Haven, CT.
2. BHMA certified extra heavy duty,
lever type bored lock conforming
to ANSI 156.2 Series 4000, Grade
1 standard and ANSI A117.1
accessibility guidelines. Motorized
locking control of lever handle
trim (solenoids not acceptable) with 1/2" anti-friction
deadlocking latch, UL listed and labeled for up to 3
hour fire rated openings.
a. Backset: 2 3/4 inches.
3. WiFi access control locks interface using wireless
connection to an Ethernet Local Area Network
(LAN) facilitating centralized control via a Software
Development Kit (SDK). Locks will continue to
operate independent of Ethernet (LAN) wireless
connection slowdown or failure.
a. Provide access control products with non-volatile
memory.
4. Provide keypad/proximity (S2-PK), proximity only
(S2-PA), keypad/iCLASS (S2-IK), and iCLASS only
(S2-IA) locks with a minimum of 2,400 user codes
and the ability to audit the last 10,000 transactions.
5. Provide Lock Management Tool (S2-PA, S2-PK,
S2-IA, S2-IK), Microsoft Windows operating system
compatible, required to program time zone periods,
blocked holidays, automatic unlock with or without
first entry, and listing 10,000 event transaction history
– event type, date, time, user ID and name.
6. Monitoring: Software accessible monitoring (via
SDK) of inside lever handle (Request-to-Exit) and Door
Position Switch (door open/closed status).
7. Emergency override access capability by mechanical
key retraction of latch bolt without electronic
activation necessary.
8. Inside lever retracts latch bolt.
9. Locks to be weather resistant via installation of
shroud (optional), conduit and gaskets.
10. 6 AA alkaline batteries power supply with LED
indication of locked, programming mode and low
capacity warning status conditions.
11. Hard wiring electrical connections and wiring by
others.
12. Cylinders: Reference 2.04 Keying for keying
requirements.
A. Profile v.S2 10G77 Series Bored Locksets
Intelligent WiFi Access Control
Mortise Locks
1. WiFi Access Control Mortise
Locks to be 8200 Series as
manufactured by Sargent
Manufacturing of New Haven, CT.
2. BHMA certified extra heavy
duty, lever type mortise lock
conforming to ANSI 156.13 Series
1000, Grade 1 standard and ANSI
A117.1 accessibility guidelines.
Motorized locking control of lever
handle trim (solenoids not acceptable) with 3/4"
anti-friction deadlocking latch and 1" case-hardened
steel deadbolt. UL listed and labeled for up to 3 hour
fire rated openings.
3. WiFi access control locks interface using wireless
connection to an Ethernet Local Area Network
(LAN) facilitating centralized control via a Software
Development Kit (SDK). Locks will continue to
operate independent of Ethernet (LAN) wireless
connection slowdown or failure.
a. Provide access control products with non-volatile
memory.
4. Provide keypad/proximity (S2-PK), proximity only
(S2-PA) , keypad/iCLASS (S2-IK), and iCLASS only
(S2-IA) locks with a minimum of 2,400 user codes
and the ability to audit the last 10,000 transactions.
5. Provide Lock Management Tool (S2-PA, S2-PK,
S2-IA, S2-IK), Microsoft Windows operating system
compatible, required to program time zone periods,
blocked holidays, automatic unlock with or without
first entry, and listing 10,000 event transaction history
– event type, date, time, user ID and name.
6. Monitoring: Software accessible monitoring (via
SDK) of inside lever handle (Request-to-Exit), auxiliary
latch, deadbolt, and door position switch (door open/
closed status).
7. Emergency override access capability by mechanical
key retraction of both latch bolt and deadbolt without
electronic activation necessary.
8. Inside lever retracts latch bolt and deadbolt
simultaneously.
9. Locks to be weather resistant via installation of
shroud (optional), conduit and gaskets.
10. 6 AA alkaline batteries power supply with LED
indication of locked, programming mode and low
capacity warning status conditions.
11. Hard wiring electrical connections and wiring
by others.
12. Cylinders: Reference 2.04 Keying for keying
requirements.
Intelligent WiFi Access Control
Rim and Mortise Exit Devices
1. WiFi Access Control Exit Devices
to be 80 Series as manufactured by
Sargent Manufacturing of
New Haven, CT.
2. BHMA certified panic and exit
device hardware conforming to
ANSI 156.3, Grade 1 standard
and ANSI A117.1 accessibility
guidelines. U.L. listed for either
panic or as “Fire Exit Hardware” for
us on labeled doors up to 3 hour fire rated openings.
3. Motorized locking and unlocking of lever handle
(solenoids not acceptable) contained completely
within the body of the outside trim control. Provide
lever design matching lock lever design.
4. WiFi access control locks interface using wireless
connection to an Ethernet Local Area Network
(LAN) facilitating centralized control via a Software
Development Kit (SDK). Locks will continue to
operate independent of Ethernet (LAN) wireless
connection slowdown or failure.
a. Provide access control products with non-volatile
memory.
5. Provide keypad/proximity (S2-PK), proximity only
(S2-PA), keypad/iCLASS (S2-IK), and iCLASS only
(S2-IA) locks with a minimum of 2,400 user codes
and the ability to audit the last 10,000 transactions.
6. Provide Lock Management Tool (S2-PA, S2-PK,
S2-IA, S2-IK), Microsoft Windows operating system
compatible, required to program time zone periods,
blocked holidays, automatic unlock with or without
first entry, and listing 10,000 event transaction history
– event type, date, time, user ID and name.
7. Monitoring: Software accessible monitoring (via
SDK) of inside push bar (Request-to-Exit), latch, and
door position switch (door open/closed status).
8. Provide keyed cylinder dogging feature for
non-rated panic devices and keyed removable
mullions as specified in the Hardware Groups.
9. Locks to be weather resistant via installation of
shroud (optional), conduit and gaskets.
10. 6 AA alkaline batteries power supply with LED
indication of locked, programming mode and low
capacity warning status conditions.
11. Hard wiring electrical connections and wiring
by others.
12. Cylinders: Reference 2.04 Keying for keying
requirements. Provide cylinders for exit devices with
cylinder override and cylinder dogging features.
FOR TRAINING PURPOSES ONLY
DATED MATERIAL

90669:D 8/13
SARGENT Manufacturing Company
100 Sargent Drive
New Haven, CT 06511 USA
800-727-5477 • www.sargentlock.com
Founded in the early 1800s, SARGENT®is a market leader in locksets, cylinders, door closers, exit devices,
electro-mechanical products and access control systems for new construction, renovation, and replacement applications.
The company’s customer base includes commercial construction, institutional, and industrial markets.
Copyright © 2003, 2004, 2007-2013, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
ASSA ABLOY is the global leader in door opening solutions, dedicated to
satisfying end-user needs for security, safety and convenience.
FOR TRAINING PURPOSES ONLY
DATED MATERIAL