Associated Electrics 80930 User manual

Thank you for purchasing this Team Associated product. This manual contains instructions and tips for
converting your Associated 1 18th scale nitro vehicle to an electric powered vehicle. Please take a moment to
read through the manual and familiarize yourself with the steps. We are continually changing and
improving our designs; therefore, actual parts may appear slightly different than the illustrations. New
parts will be noted on supplimentary sheets located in the appropriate parts bags. Check each bag for these
sheets before you start
to build.
Team Associated wants you to en/'oy the process of building, driving, and maintaining your Associated
vehicle. If you discover
any prob ems or need help with the assembly of your model, please give us a call,
or visit web site, and we will do our very best to help you.

•
• • •
note;
the sce wlU raqulre
you to remove the
remote glow plug
along with the rBBt of
the nitro oompommts
•
•

,
,
,
~
noca:
, ,
remove receiver
,
~
from radio box
,

note:
cut fuel tubing
brace off of the
left side guard
" #

note:
save two
screws for
reinstall
~ notB: ------ ~
ssvefor
reinstallation
A
*Onlythe RCS and RCSTwill
require you to dissasemble
the center difffor spur gear
replacement. The SCS is
already equipped with the
correct spur gear.

,. . ,. ., I, ..

89110
spur gear
RCB/SCB
-OR-
89372
5DT spur gear
RCST
note:
two shims

B920B
x4
B9120

89501
motor
mount

riser
RCBanly!
nota:
RCBTl!lndSCB
use the existing
cancer dlff rIBBr:
onlythaRCB
uaaBthanaw
included riser
x3
x4

note:
speed contrtol
not included.
attatch with
servotape.
note:
route the speed
control receiver
wire through
this

note;
there ere two

note:
route the speed
control receiver
wire through the
radio box hole
note:
route the speed
control receiver
wire up and
over the bridge
reinstall servo
with your saved
hardware
88006
-"'C<,,,,,,n spacers
[1 thick)
note:
RTR vehicles will
need to add servo
spacers #88006

note:
route the servo
wire to the
receiver through
this opening
25215
M310cknut
89509
battery tray
post
note:
there are two
different positions
for the locknuts
depending on whet
itro vehicle you

note:
plug in your speed
control and servo
to your receiver
note:
route your receiver's
antenna wire through
the slot in the radio
tray, and through
your antenna tube.