Astonica 50105602 User manual

IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER, CONTACT CUSTOMER SERVICE AT
1-888-424-3354
050107rev1
Read the instructions and precautions before use of this product
Please keep this instruction manual for future reference
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER, CONTACT CONSUMER SUPPORT AT
1-888-424-3354
OR
IF YOU ARE A STORE MANAGER OR EMPLOYEE IN NEED OF ASSISTANCE CALL
1-888-851-5569
PLEASE HAVE YOUR STORE NUMBER READY
Limited Warranty
World Factory, Inc.®Products for Home Use
World Factory, Inc.®(Seller) warrants to the original Buyer only, that each Astonica®Product will be
free from defects in material and workmanship for a period of one (1) year from date of purchase.
SELLER’S SOLE OBLIGATION AND BUYER’S EXCLUSIVE REMEDY UNDER THIS LIMITED
WARRANTY SHALL BE THE REPAIR OR REPLACEMENT OF PARTS, WITHOUT CHARGE, WHICH
ARE DEFECTIVE IN MATERIAL OR WORKMANSHIP. ANY PARTS AS DETERMINED BY THE
SELLER WHICH HAVE BEEN MISUSED; ABUSED OR DAMAGED EITHER DIRECTLY OR INDIRECTLY
FROM REPAIRS OR ALTERATIONS ATTEMPTED BY UNAUTHORIZED PERSONS; IMPROPER
MAINTENANCE, NEGLECT OR ACCIDENT ARE NOT COVERED BY THIS LIMITED WARRANTY. This
warranty does not apply to damage, heat-induced coloration changes, scratching or alteration due to
normal use or weathering. To make a claim under this Limited Warranty, you must return the complete
product with proof of purchase, transportation prepaid, to any World Factory, Inc.®authorized service
center. Call 1-888-424-3354 for the location of the nearest authorized service center.
Additional Limitations
THIS LIMITED WARRANTY DOES NOT APPLY TO ACCESSORY OR CONSUMABLE ITEMS RELATED
TO THIS PRODUCT. ALL IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO ONE (1)
YEAR FROM DATE OF PURCHASE. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LIABILITY FOR
LOSS OF PROFITS, ARISING FROM THE SALE OR USE OF THIS PRODUCT.
If any provision of this Limited Warranty is for any reason held to be invalid or unenforceable, such
provision shall not affect any other provision herein, this Limited Warranty shall be construed as if
such invalid and/or unenforceable provision had never been contained herein.
This Warranty contains the entire agreement between Seller and Buyer and supersedes any and all
prior agreements, arrangements, or understandings between the parties relating to product warranty.
®
Made in China
©2006 World Factory, Inc.
Distributed by:
World Factory, Inc.
Coppell, TX 75019
Model No: 50105602
Nassau 35" x 35" Square Glass
Top Expandable Table
Instruction Manual
Due to ongoing product development
the actual product or products may vary from
the illustrations or photos shown within this manual.
NOTE: This product is intended for residential, non-commercial use.

PARTS LIST
PART # DESCRIPTION QUANTITY
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER. CONTACT CUSTOMER SERVICE AT
1-888-424-3354
Carefully remove the contents from the package. If any parts are missing do not
attempt to use the product until they have been obtained and correctly installed.
A Expandable Table Top 1
B Table Leg 4
C Corner Brace 4
D Bolt 24
E Flat Washer 24
F Plastic Bolt Cap 24
G Hex Key 1
NOTE: This product is intended for residential, non-commercial use.
Parts Detail A
C
BD
EF
1
G

ASSEMBLY INSTRUCTIONS
Figure 1
 CAUTION: Do not over tighten fasteners.
Install Table Legs and Corner Braces
1.(SEE FIGURE 1) Place expandable table top (A) upside down on flat non-scratch surface.
2.Turn one table leg (B) upside down and align mounting tab with corner of table top (A)
 mounting holes.
3.Loosely attach table leg (B) to table top (A) using two flat washers (E), and two bolts (D).
4.Align one corner brace (C) with table table leg and table top as shown in Figure 1. Loosely
 attach corner brace to table leg and table top.
5.Repeat steps 2 through 4 with remaining table legs (B) and corner braces (C).
6.Once all table legs and corner braces are in place tighten all fasteners using hex key (G).
7.Place bolt cap (F) over the bolt heads (D) and push to snap caps securely in place.
A
A
B
F
D
E
C
B
2
CTable Leg
Mounting Tab
Figure 2
Figure 3
OPERATING EXPANDABLE TABLE TOP
How to Open Table Top
1.(SEE FIGURE 2) Slide first level of table top outwards as far as top will go.
 Do not force the top to move. If the top sticks make sure it is straight, then slide outwards.
NOTE: First level of table top should lock in place when moved fully outward.
2.Slide second level of table top outwards as far as top will go withoutforcing the top to move.
 Then, lift upwards on second level and slide inward to lock in place.
How to Close Table Top
1.(SEE FIGURE 3) Slide second level of table top outward to separate.
2.Lift upwards slightly, until table top engages in track. Next push second level inward
 until top locks in place.
3.Slide first level of table top inward until top locks in place.
Table Top
First Level
Table Top
Second Level
Table Top
Second Level
2)Lift upward
3)Push forward
 to close
Table Top
First Level
TABLE
CLOSED
TABLE
HALF OPEN
TABLE
FULLY OPEN
1)Slide outward
 to open
1)Slide outward
 to separate.
2)Slide outward
 to open, then
 inwards to lock
3
Table Top
Second Level
TABLE
FULLY OPEN
TABLE
HALF CLOSED
4)Push forward
 to close
Table Top
Second Level
Table Top
First Level
Table Top
First Level
Table Top
First Level