Astonica 40200101 User manual

IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER, CONTACT CUSTOMER SERVICE AT
1-888-424-3354
290805rev2
Read the instructions and precautions before use of this product
Please keep this instruction manual for future reference
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER, CONTACT CONSUMER SUPPORT AT
1-888-424-3354
OR
IF YOU ARE A STORE MANAGER OR EMPLOYEE IN NEED OF ASSISTANCE CALL
1-888-851-5569
PLEASE HAVE YOUR STORE NUMBER READY
Limited Warranty
World Factory, Inc.®Products for Home Use
World Factory, Inc.®(Seller) warrants to the original Buyer only, that each Astonica®Product will be
free from defects in material and workmanship for a period of one (1) year from date of purchase.
SELLER’S SOLE OBLIGATION AND BUYER’S EXCLUSIVE REMEDY UNDER THIS LIMITED
WARRANTY SHALL BE THE REPAIR OR REPLACEMENT OF PARTS, WITHOUT CHARGE, WHICH
ARE DEFECTIVE IN MATERIAL OR WORKMANSHIP. ANY PARTS AS DETERMINED BY THE
SELLER WHICH HAVE BEEN MISUSED; ABUSED OR DAMAGED EITHER DIRECTLY OR INDIRECTLY
FROM REPAIRS OR ALTERATIONS ATTEMPTED BY UNAUTHORIZED PERSONS; IMPROPER
MAINTENANCE, NEGLECT OR ACCIDENT ARE NOT COVERED BY THIS LIMITED WARRANTY. This
warranty does not apply to damage, heat-induced coloration changes, scratching or alteration due to
normal use or weathering. To make a claim under this Limited Warranty, you must return the complete
product with proof of purchase, transportation prepaid, to any World Factory, Inc.®authorized service
center. Call 1-888-424-3354 for the location of the nearest authorized service center.
Additional Limitations
THIS LIMITED WARRANTY DOES NOT APPLY TO ACCESSORY OR CONSUMABLE ITEMS RELATED
TO THIS PRODUCT. ALL IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO ONE (1)
YEAR FROM DATE OF PURCHASE. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LIABILITY FOR
LOSS OF PROFITS, ARISING FROM THE SALE OR USE OF THIS PRODUCT.
If any provision of this Limited Warranty is for any reason held to be invalid or unenforceable, such
provision shall not affect any other provision herein, this Limited Warranty shall be construed as if
such invalid and/or unenforceable provision had never been contained herein.
This Warranty contains the entire agreement between Seller and Buyer and supersedes any and all
prior agreements, arrangements, or understandings between the parties relating to product warranty.
®
Made in China
©2005 World Factory, Inc.
Distributed by:
World Factory, Inc.
Coppell, TX 75019
Model No: 40200101
Girl With Umbrella Resin Fountain
Instruction Manual
Due to ongoing product development
the actual product or products may vary from
the illustrations or photos shown within this manual.


 AMP Load  Volts Extension Cord Length
   120V 25'  50'  100'  150'
      AWG
  1-5  18  16 16 14
  6-10  18  16  14  12
 10-12  14  14  14  12
 12-16  14  12  Not recommended
Table 1. Minimum Recommended Extension Cord Gauge (AWG) Chart
WARNING: RISK OF ELECTRICAL SHOCK. This product must be plugged into an outlet
 properly installed and grounded in accordance with all codes and ordinances. Never remove
 the grounding prong or modify the plug in any way. Do not use adaptor plugs. Check with a
 qualified electrician if you are in doubt as to whether the outlet is properly grounded. If product
 should electrically malfunction or break down grounding provides a low resistance path to
 carry electricity away from the user.


Extension Cords
1.Make sure your extension cord is in good condition.
2.When using an extension cord, be sure to use one heavy enough to carry the current your
 product will draw. An undersized cord will cause a drop in line voltage resulting in loss of
 power and overheating. Reference Table 1 for the correct size to use depending on cord
 length and nameplate Ampere rating. If in doubt, use the next heavier gage. The smaller the
 gage number, the heavier the cord.
Outdoor Use Extension Cords.
1.When product is used outdoors, use only extension cords intended for outdoor use
 and so marked.
2.Use only UL listed extension cords. Inspect extension cord before use and never use
 damaged or altered extension cords.
3.Follow extension cord manufacturer safety instruction.
1
SAFETY INSTRUCTIONS

PARTS & HARDWARE LIST
PART # DESCRIPTION QUANTITY
A 1Girl Ornament
B 1Umbrella
C 1Dish
D 1Pump Cover
E 1Post
F 1Post Connector
G 1Base
H 1
1
1
Basin
I 1Pump Assembly
J
K
L
3Screws and Washers
Copper Connector
Pump and Girl Ornament Mounting Bracket
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER. CONTACT CUSTOMER SERVICE AT
1-888-424-3354.
Carefully remove the contents from the package. If any parts are missing do not attempt to
use the product until they have been obtained and correctly installed.
A
B
C
D
G
Figure 1
Figure 4
Figure 3
Figure 2
1.(SEE FIGURE 1) Connect post (E) and post
 connector (F) together.
2.Insert the pump (I) electrical cable through
 the center hole of post assembly (E and F)
 and base (G).
3.Thread the lower end of post connector (F) into
 base (G). Rotating clockwise to tighten.
4. (SEE FIGURE 2) Thread bowl (H) onto
 upper end of post (E). Rotate clockwise
 to tighten.
5. Secure the pump assembly (I) to basin (H)
 using mounting bracket (L), screws and
 washers (J).
6. Thread the copper connector (K) in the
 mounting bracket (L) until copper tube of
 connector is tight on the top of the spout,
 located on the top the pump assembly.
NOTE: Pump electrical cable should be routed
 in slot in bottom of bracket (L). Mounting holes
 in pump assembly will align with basin in
 only direction, rotate as necessary to secure.
7.  (SEE FIGURE 3) Adjust the pump flow selector
 lever to the central position, midway between
 "+" and "-" symbols.
8. Place the pump housing (D) and dish (C) over
 the pump assembly (I).
CAUTION: Never operate the pump without
 water. Damage to the pump may occur.
9.  (SEE FIGURE 4) Thread the girl ornament (A)
 onto the pump assembly tube. Rotating
 clockwise to tighten.
10.Slip the umbrella (B) onto the girl ornament (A).
11.Fill basin with water and test water flow.
12.Follow reverse order of assemble to adjust
 pump flow if necessary.
IJKL
H
E
F
E
F
G
H
I
E
J
L
H
D
C
A
B
ASSEMBLY INSTRUCTIONS
I
23
K
I