Asus EA-N66R User manual

®
Quick Start Guide
EA-N66R
Ethernet Adapter

English............................................. 4
Français ........................................... 12
Español............................................ 20
Português do Brasil..................... 28
Q7020 / July 2012

4
English
A quick look
1) Ethernet port
2) DC In port
3) LED indicator
OFF: No power or physical connection
Solid light: Excellent connection
Blinking fast: Active connection
Blinking slow: connection
4) Air vent
5) Mounting hole
6) WPS button
7) Reset button
12
345
7
6

5
English
Mounting options
Out of the box, the ASUS EA-N66Ris
designed to sit on a raised at surface like
a le cabinet or book shelf. The unit may
also be converted for mounting to a wall
or ceiling.
1. Look on the
underside for the
mounting hook.
2. Mark an upper
hole in a at
surface.
3. Tighten one screw
until only 1/4’’is showing.
4. Latch the hook of your EA-N66Ronto
the screw.
Package contents
EA-N66RPower adapter
Network cable Quick Start Guide
NOTE: If any of the items is damaged or
missing, contact your retailer.
NOTES:
• Re-adjust the screw if you cannot latch
EA-N66Ronto the screw or if it is too
loose.
• The screw is not included in the
EA-N66Rpackage contents.

6
English
Getting started
1. Connect to a wireless network.
A. Connecting via the WPS button
The WPS (Wi-Fi Protected Setup) button
allows you to connect to a secured and
protected network.
2. Press WPS
button on
the router.
1. Press the
WPS button
on EA-N66R.

7
English
B. Connecting via a network cable
a: Insert your EA-N66R’s AC adapter to
the DC-In port and plug it to a power
outlet.
b: Using the bundled network cable,
connect your computer to your
EA-N66R’s LAN port.
EA-N66R
Power
Wall Power Outlet
LAN
a
b
2. Log into the EA-N66R's web
graphics user interface (web
GUI).
a: Ensure that the wireless LED is
blinking.
Wireless LED
b: In your web browser, key in www.
asusrouter.com. Key in admin as the
default username and password.
c: From the web GUI, select the
operation mode and congure its
settings for your wireless network
setup.

8
English
NOTE: If the web GUI does not launch,
refer to the Frequently Asked Questions
section.
IMPORTANT:
• For the best wireless performance, place
EA-N66 at a distance of more than 1.5
meters away from the parent Access
Point (AP).
• You can adjust the transmission power
of EA-N66Rfrom its web interface.

9
English
Operation modes
ASUS EA-N66Rprovides three operation
modes: Ethernet Adapter, Access Point
(AP), and Repeater.
NOTE: Please follow the GUI Setup Wizard
for these modes.
Ethernet Adapter mode
By default, EA-N66Ris set to the Ethernet
Adapter mode. In this mode, you can con-
nect any Ethernet-enabled device to your
wireless home network via the wireless
router. This mode is perfect for home
theater devices such as the Internet TV,
TiVo, and Blu-ray player.
Internet TV
ADSL/
Cable
modem

10
English
Frequently Asked Questions
Q1: I cannot access the web GUI to
congure the EA-N66Rsettings.
• Close all running web browsers and
launch again.
• Follow the steps below to congure
your computer settings based on its
operating system.
Windows 7
A. Disable the proxy server, if enabled.
1. Click Start > Internet Explorer to
launch the web browser.
2. Click Tools > Internet options > Con-
nections tab > LAN settings.
3. From the Local Area Network (LAN)
Settings screen, untick Use a proxy
server for your LAN.
4. Click OK when done.
B. Set the TCP/IP settings to automati-
cally obtain an IP address.
1. Click Start > Control Panel > Net-
work and Internet > Network and
Sharing Center > Manage network
connections.
2. Select Internet Protocol Version 4
(TCP/IPv4), then click Properties.
3. Tick Obtain an IP address automati-
cally.
4. Click OK when done.