Asus AAEON BOXER-8221AI-B Operation manual

Most Confidential
Confidential
Internal
Public
V
NVIDIA Jetson Nano Platform
ACLinux 4.9
BOXER-8221AI-B
July 2020
Revision 1.0
Installation User Guide

1
Revision History
Revision
Date
Description
1.0
July 2020
Initial release.

2
Contents
Revision History .......................................................................................1
1. Preparing...........................................................................................3
1.1. Pre-requisites ..........................................................................3
1.2. In Linux Host............................................................................4
2. To Flash Image...................................................................................5
2.1. Flash Image to Board...............................................................5

3
1.Preparing
1.1. Pre-requisites
1) Prepare an image compressed file. Its name will be like
I. {OS_IF} is OS Information; e.g. ACLNX49D which ACLNX means
ACLinux, 49 means ACLinux 4.9 and X means Desktop version.
II. {PLF_IF} is Platform Information; e.g. NV03
III. {PJ_IF} is Project Information; e.g. BOXER-8221AI-B
IV. {BN} is Build Number; e.g. 0,1,2,…,N
2) Prepare one host PC that OS is Ubuntu 16.04 or 18.04
3) Prepare Jetson Nano B01 module (with eMMC).
ACLinux_4.9_{OS_IF}.{PLF_IF}.{PJ_IF}.{BN}.tar.gz

4
1.2. In Linux Host
1) Unzip image compression file on Ubuntu Host PC.
$ tar -zxvf ACLinux_4.9_{OS_IF}.{PLF_IF}.{PJ_IF}.{BN}.tar.gz
2) Connect Host PC and BOXER-8221AI-B via micro USB.
3) Press and hold down the recovery button and then connect the
power supply. Please release the recovery button after two
seconds. The target board goes into recovery mode now.
4) When device is in recovery mode, lsusb command on host PC will
list a line of “0955:7f21 NVidia Corp"

5
2.To Flash Image
2.1. Flash Image to Board
1) Type [Ctrl] + [Alt] + [t] to open terminal on Ubuntu Host PC.
2) Enter the bootloader folder that you unzip.
3) Execute script to flash image.
$ sudo ./flashall.sh
4) Flash image complete.