Asus Aaeon FWS-2273E7-A10-A10-00 User manual

FWS-2273
Desktop Network Appliance
User’s Manual 3rd Ed

Preface II
Desktop Network Appliance FWS-2273
Copyright Notice
This document is copyrighted, 2019. All rights are reserved. The original manufacturer
reserves the right to make improvements to the products described in this manual at
any time without notice.
No part of this manual may be reproduced, copied, translated, or transmitted in any
form or by any means without the prior written permission of the original manufacturer.
Information provided in this manual is intended to be accurate and reliable. However,
the original manufacturer assumes no responsibility for its use, or for any infringements
upon the rights of third parties that may result from its use.
The material in this document is for product information only and is subject to change
without notice. While reasonable efforts have been made in the preparation of this
document to assure its accuracy, AAEON assumes no liabilities resulting from errors or
omissions in this document, or from the use of the information contained herein.
AAEON reserves the right to make changes in the product design without notice to its
users.

Preface III
Desktop Network Appliance FWS-2273
Acknowledgement
All other products’ name or trademarks are properties of their respective owners.
Microsoft Windows is a registered trademark of Microsoft Corp.
Intel, Pentium, Celeron, and Xeon are registered trademarks of Intel
Corporation
Core, Atom are trademarks of Intel Corporation
ITE is a trademark of Integrated Technology Express, Inc.
IBM, PC/AT, PS/2, and VGA are trademarks of International Business Machines
Corporation.
All other product names or trademarks are properties of their respective owners.

Preface IV
Desktop Network Appliance FWS-2273
Packing List
Before setting up your product, please make sure the following items have been
shipped:
Item
Quantity
FWS-2273
1
SATA cable
1
SATA power cable
1
Power adapter
1
Rubber foot
4
If any of these items are missing or damaged, please contact your distributor or sales
representative immediately.

Preface V
Desktop Network Appliance FWS-2273
About this Document
This User’s Manual contains all the essential information, such as detailed descriptions
and explanations on the product’s hardware and software features (if any), its
specifications, dimensions, jumper/connector settings/definitions, and driver
installation instructions (if any), to facilitate users in setting up their product.
Users may refer to the AAEON.com for the latest version of this document.

Preface VI
Desktop Network Appliance FWS-2273
Safety Precautions
Please read the following safety instructions carefully. It is advised that you keep this
manual for future references
1. All cautions and warnings on the device should be noted.
2. All cables and adapters supplied by AAEON are certified and in accordance with
the material safety laws and regulations of the country of sale. Do not use any
cables or adapters not supplied by AAEON to prevent system malfunction or
fires.
3. Make sure the power source matches the power rating of the device.
4. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
5. Always completely disconnect the power before working on the system’s
hardware.
6. No connections should be made when the system is powered as a sudden rush
of power may damage sensitive electronic components.
7. If the device is not to be used for a long time, disconnect it from the power
supply to avoid damage by transient over-voltage.
8. Always disconnect this device from any AC supply before cleaning.
9. While cleaning, use a damp cloth instead of liquid or spray detergents.
10. Make sure the device is installed near a power outlet and is easily accessible.
11. Keep this device away from humidity.
12. Place the device on a solid surface during installation to prevent falls
13. Do not cover the openings on the device to ensure optimal heat dissipation.
14. Watch out for high temperatures when the system is running.
15. Do not touch the heat sink or heat spreader when the system is running
16. Never pour any liquid into the openings. This could cause fire or electric shock.

Preface VII
Desktop Network Appliance FWS-2273
17. As most electronic components are sensitive to static electrical charge, be sure
to ground yourself to prevent static charge when installing the internal
components. Use a grounding wrist strap and contain all electronic components
in any static-shielded containers.
18. If any of the following situations arises, please the contact our service personnel:
i. Damaged power cord or plug
ii. Liquid intrusion to the device
iii. Exposure to moisture
iv. Device is not working as expected or in a manner as described in
this manual
v. The device is dropped or damaged
vi. Any obvious signs of damage displayed on the device
19. DO NOT LEAVE THIS DEVICE IN AN UNCONTROLLED ENVIRONMENT WITH
TEMPERATURES BEYOND THE DEVICE’S PERMITTED STORAGE TEMPERATURES
(SEE CHAPTER 1) TO PREVENT DAMAGE.

Preface VIII
Desktop Network Appliance FWS-2273
FCC Statement
This device complies with Part 15 FCC Rules. Operation is
subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must
accept any interference received including interference that
may cause undesired operation.
Caution:
There is a danger of explosion if the battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the manufacturer. Dispose of used batteries
according to the manufacturer’s instructions and your local government’s recycling or
disposal directives.
Attention:
Il y a un risque d’explosion si la batterie est remplacée de façon incorrecte.
Ne la remplacer qu’avec le même modèle ou équivalent recommandé par le
constructeur. Recycler les batteries usées en accord avec les instructions du fabricant et
les directives gouvernementales de recyclage.

Preface IX
Desktop Network Appliance FWS-2273
China RoHS Requirements (CN)
产品中有毒有害物质或元素名称及含量
AAEON Embedded Box PC/ Industrial System
部件名称
有毒有害物质或元素
铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
印刷电路板
及其电子组件
○
○
○
○
○
○
外部信号
连接器及线材
○
○
○
○
○
○
外壳
○
○
○
○
○
○
中央处理器
与内存
○
○
○
○
○
○
硬盘
○
○
○
○
○
○
电源
○
○
○
○
○
○
O：表示该有毒有害物质在该部件所有均质材料中的含量均在
SJ/T 11363-2006 标准规定的限量要求以下。
X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出
SJ/T 11363-2006 标准规定的限量要求。
备注：
一、此产品所标示之环保使用期限，系指在一般正常使用状况下。
二、上述部件物质中央处理器、内存、硬盘、光驱、触控模块为选购品。

Preface X
Desktop Network Appliance FWS-2273
China RoHS Requirement (EN)
Poisonous or Hazardous Substances or Elements in Products
AAEON Embedded Box PC/ Industrial System
Component
Poisonous or Hazardous Substances or Elements
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
Chromium
(Cr(VI))
Polybrominated
Biphenyls
(PBB)
Polybrominated
Diphenyl Ethers
(PBDE)
PCB & Other
Components
O
O
O
O
O
○
Wires &
Connectors
for External
Connections
O
O
O
O
O
O
Chassis
O
O
O
O
O
O
CPU & RAM
O
O
O
O
O
O
Hard Disk
O
O
O
O
O
O
PSU
O
O
O
O
O
O
O：The quantity of poisonous or hazardous substances or elements found in each of the
component's parts is below the SJ/T 11363-2006-stipulated requirement.
X: The quantity of poisonous or hazardous substances or elements found in at least one of the
component's parts is beyond the SJ/T 11363-2006-stipulated requirement.
Note: The Environment Friendly Use Period as labeled on this product is applicable under
normal usage only

Preface XI
Desktop Network Appliance FWS-2273
Table of Contents
Chapter 1 – Product Specifications.......................................................................................13
1.1 Specifications................................................................................................................. 14
Chapter 2 – Hardware Information ......................................................................................17
2.1 Dimensions .................................................................................................................... 18
2.2 Jumpers and Connectors..........................................................................................20
2.3List of Jumpers..............................................................................................................22
2.3.1 CFD Voltage 3.3V/5V Selection (JP1).........................................................23
2.3.2 Auto PWRBTN Selection (JP2)..................................................................23
2.3.3 CMOS Setting Selection (CN1)..................................................................23
2.4 List of Connectors........................................................................................................24
2.4.1 Digital I/O (CN6)..............................................................................................26
2.4.2 Front Panel Pin Head (CN4) ......................................................................26
2.5 2.5” Hard Disk Drive Installation .................................................................27
2.6 Mini PCIe Card Installation...........................................................................33
Chapter 3 – AMI BIOS Setup................................................................................................ 35
3.1System Test and Initialization....................................................................................36
3.2 AMI BIOS Setup............................................................................................................37
3.3 Setup Submenu: Main................................................................................................38
3.4 Setup Submenu: Advanced......................................................................................39
3.4.1 Advanced: Trusted Computing...................................................................40
3.4.2 Advanced: CPU Configuration .................................................................42
3.4.3 Advanced: SATA Drives...............................................................................43
3.4.4 Advanced: USB Configuration..................................................................44
3.4.5 Advanced: Hardware Monitor ..................................................................45
3.4.6 Advanced: SIO Configuration...................................................................47
3.4.6.1 SIO Configuration: Serial Port Configuration...........................48

Preface XII
Desktop Network Appliance FWS-2273
3.4.6.1.2 Console Redirection Settings.....................................................50
3.4.7 Advanced: Power Management...............................................................57
3.4.8 Digital IO Port Configuration....................................................................59
3.5 Setup submenu: Chipset ...........................................................................................60
3.5.1 Chipset: North Bridge.................................................................................... 61
3.5.1.1 North Bridge: AMI Graphic Output Protocol Policy...............62
3.6 Setup submenu: Security...........................................................................................63
3.7 Setup submenu: Boot.................................................................................................64
3.8 Setup submenu: Exit ...................................................................................................65
Chapter 4 – Driver Installation ............................................................................................. 66
4.1 Driver Installation.........................................................................................................67
Appendix A – Watchdog Timer Programming .................................................................. 68
A.1 Watchdog Timer Initial Program.............................................................................69
Appendix B – I/O Information.............................................................................................. 75
B.1 I/O Address Map..........................................................................................................76
B.2 Memory Address Map...............................................................................................78
B.3 IRQ Mapping Chart.....................................................................................................80
Appendix C – Standard LAN Bypass Platform Setting...................................................... 89
C.1 Introduction to LED.....................................................................................................90
C.1.1 Status LED Configuration.............................................................................. 91
C.1.2 Sample Code..................................................................................................92
C.2 Introduction to LAN Bypass......................................................................................94
C.2.1 LAN Bypass.....................................................................................................95
C.2.2 Sample Code..................................................................................................97
C.3 Introduction to Software Reset Button Configuration......................................99
C.3.1 Soft Reset Button Configuration............................................................100
C.3.2 Sample Code.................................................................................................101

Desktop Network Appliance FWS-2273
Chapter 1
Chapter 1 –Product Specifications

Chapter 1 – Product Specifications 14
Network Appliance FWS-2273
1.1 Specifications
System
Form Factor
Desktop Network Appliance
Processor
Intel® Celeron® N3350 Processor SoC
Chipset
Intel® Celeron® N3350 Processor SoC
System Memory
204-pin DDR3L SODIMM x 1, up to 8GB
Network
Ethernet
Intel® i211, Gigabit Ethernet x 4 Intel® i210, SFP
x 2
Bypass
Supports up to 2 pairs bypass function
Display
Graphic Controller
Intel® HD Graphics 505 Intergrated
Connector
HDMI x 1
Storage
HDD
2.5” HDD Bay x 1
CF/CFAST/MSATA
CompactFlash™ socket x 1 (Co-lay for BOM
Optional CFast™ socket x 1) SATA 6.0 Gb/s port
x 1

Chapter 1 – Product Specifications 15
Network Appliance FWS-2273
Internal/ Expansion Interface
PCIe Slot
—
Mini-PCIe Slot
Mini-Card socket (full-size) with SIM socket x 2
KB Mouse
Reserve pin-header
USB
USB 3.0 x 2
Miscellaneous
RTC
Internal RTC
Watchdog Timer
1~255 steps by software programmable
TPM
(TPM v1.2 9660/TPM2.0 9665 Optional)
GPIO
Reserve internal pin header 8-bit Digital I/O
interface (4-in /4-out)
Fan
Fanless, reserved pin header for system fan
MTBF (Hours)
109,725
Color
Black
I/O
Front Panel
Power LED x 1, Status LED x 1,
Storage Active LED x 1, Bypass LED x 2,
LAN LED x 12
Rear Panel
USB 3.0 Port x 2, RJ-45 Port x 4, SFP x 2,
RJ-45 Console x 1,
12V DC Power Input x 1, Software Reset Button
x 1, Power Button x 1,
HDMI x 1,
Antenna Hole x 2

Chapter 1 – Product Specifications 16
Network Appliance FWS-2273
Environmental Parameters and Dimension
Power Requirement
12V DC Power in connector
Operating Temperature
32°F ~ 104°F (0°C ~ 40°C )
Storage Temperature
-4°F ~ 140°F (-20°C ~ 60°C)
Operating Humidity
10%~80% relative humidity, non-condensing
Storage Humidity
10%~80% @40°C; non-condensing
Vibration
0.5 Grms/ 5 ~ 500Hz / operation (2.5" HDD)
1.5 Grms/ 5 ~ 500Hz / non operation
Shock
10 G peak acceleration (11 m sec. duration),
operation
20 G peak acceleration (11 m sec. duration), non
operation
Dimension (W x D x H)
8.66” x 4.13” x 1.73” (220mm x 105mm x 44mm)

Desktop Network Appliance FWS-2273
Chapter 2
Chapter 2 –Hardware Information

Chapter 2 – Hardware Information 18
Network Appliance FWS-2273
2.1Dimensions
System

Chapter 2 – Hardware Information 19
Network Appliance FWS-2273
Board
Component Side
Solder Side

Chapter 2 – Hardware Information 20
Network Appliance FWS-2273
2.2 Jumpers and Connectors
Component Side