Asus T2 3-in-1 Upgrade ET1605 User manual

T2 3-in-1 Upgrade
ET1605
User’s Guide
First Edition V1
March 2004

2 ASUS T2 3-in-1 Upgrade User’s Guide
Copyright © 2004 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a
retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup
purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of
alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT
NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. IN NO EVENT SHALLASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES ORAGENTS BE LIABLE FOR ANY INDIRECT,
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF
BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESSAND THE LIKE), EVEN IF ASUS HAS BEENADVISED OF
THE POSSIBILITY OF SUCH DAMAGESARISING FROM ANY DEFECTOR ERROR IN THIS MANUALOR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND
ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,AND SHOULD NOT BE CONSTRUED ASACOMMITMENT BY
ASUS. ASUSASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTSAND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective
companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.

ASUS T2 3-in-1 Upgrade User’s Guide 3
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING: Any changes or modifications to this product not expressly approved by the manufacturer could void
any assurances of safety or performance and could result in violation of Part 15 of FCC Rules.
Reprinted from the Code of Federal Regulations #47, part 15.193, 1993. Washington DC: Office of the Federal Register, NationalArchives
and Records Administration, U.S. Government Printing Office.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications. This class B digital apparatus complies with Canadian ICES-003.

4 ASUS T2 3-in-1 Upgrade User’s Guide
Contents
Notices .................................................................................................................. 3
1. Welcome! ....................................................................................................... 5
2. Specifications ................................................................................................. 5
3. Package contents .......................................................................................... 6
4. Installing the T2 3-in-1 Upgrade Card ............................................................ 7
5. Installation of devices................................................................................... 10
6. Driver Setup ..................................................................................................11
7. Troubleshooting ............................................................................................11
ASUS Contact Information.................................................................................. 12

ASUS T2 3-in-1 Upgrade User’s Guide 5
1. Welcome!
Congratulations on your purchase of an ASUS T2 3-in-1 Upgrade card! This card is efficiently
designed to provide a bridge between data-intensive devices and your computer system.
The T2 3-in-1 Upgrade card combines powerful features including a Gigabit LAN controller, an
IEEE802.11b-compliantwirelessLAN andanIEEE1394 controller.TheASUST2 3-in-1Upgrade
cardprovidesGigabitLAN, wireless LAN and easy-to-usedigitalinterfacefor throughput devices
such as DV camcorders, digital cameras, DVDs, scanners, and printers.
2. Specifications
• 3COM Gigabit LAN controller
• VIA VT6307 1394 controller
• IEEE 802.11b-compliant wireless LAN controller
• Real-time data transmission
• Two (2) internal 8-pin IEEE 1394 connectors
• Seamless I/O interconnect
• Hot-pluggable connectors

6 ASUS T2 3-in-1 Upgrade User’s Guide
3. Package contents
Check your T2 3-in-1 package for the following items:
• Dipolar antenna
• T2 3-in-1 upgrade card
• IEEE 1394 signal cables
• Front panel I/O sticker
• User guide
NOTE:
If any of the following items are damaged or missing, contact your retailer.

ASUS T2 3-in-1 Upgrade User’s Guide 7
4. Installing the T2 3-in-1 Upgrade Card
1. Turn off the system and remove the system cover.
2. Remove possible static discharge by touching a bare metal chassis railing.
3. Identify the available PCI slot and remove the bracket opposite the slot that you will use.
4. Align the card connector with the slot and press
firmly until the card is completely seated on the
slot.
5. Replace the expansion card lock to secure the
card to the chassis.
PCI card 4
5

8 ASUS T2 3-in-1 Upgrade User’s Guide
6. Connect one end of the first IEEE 1394 signal
cable to the IEEE 1394 connector labeled
IE1394_1 on the 3-in-1 card.
7. Connect one end of the second IEEE 1394
signal cable to the IEEE 1394 connector labeled
IE1394_2 on the 3-in-1 card.
8. Connect the other end of the first IEEE 1394
signal cable to the IEEE 1394 connector labeled
IE1394_1 on the front panel I/O daughterboard
of the Terminator 2 system.
9. Connect the other end of the second IEEE 1394
signal cable to the IEEE 1394 connector labeled
IE1394_2 on the front panel I/O daughterboard
of the Terminator 2 system.
10. Replace the system cover.
7
6
9
8
NOTE:
For details on PCI card installation, refer to “Chapter 2: Basic Installation” of the Terminator 2
User Guide.

ASUS T2 3-in-1 Upgrade User’s Guide 9
11. Remove the installed front panel I/O sticker.
12. Place the bundled front panel I/O sticker.

10 ASUS T2 3-in-1 Upgrade User’s Guide
5. Installation of devices
The T2 3-in-1 Upgrade card supports one external RJ-45 port for Gigabit LAN, an IEEE
802.11b-compliant wireless LAN, and two internal IEEE 1394 10-1 pin connectors for connection
of additional 4-pin and 6-pin 1394 ports in the system front panel.
PCI-5IN1
R
IE1394_1
IE1394_2
IEEE 1394 devices Dipolar antenna
RJ-45 Gigabit LAN