Asus E9024 User manual

User Guide
E9024
ASUS Tablet
First Edition / April 2014
E9024_ME170C_ME7010C_ME7010CX_UG.indd 1 2014/4/29 �� 03:31:18

Charging your device
Ensure to fully charge your ASUS Tablet before using it in
battery mode for extended periods. Remember that the power
adapter charges your ASUS Tablet as long as it is plugged into
an AC power source. Be aware that it takes much longer to
charge the ASUS Tablet when it is in use.
IMPORTANT! Do not leave the ASUS Tablet connected to
the power supply once it is fully charged. ASUS Tablet is not
designed to be left connected to the power supply for extended
periods of time.
Airplane precautions
Contact your airline provider to learn about related inight
services that can be used and restrictions that must be followed
when using your ASUS Tablet in-ight.
IMPORTANT! You can send your ASUS Tablet through x-ray
machines (used on items placed on conveyor belts), but do not
expose them from magnetic detectors and wands.
Safety precautions
This ASUS Tablet should only be used in enviroments with
ambient temperatures between 0°C to 35°C (32°F to 95°F).
Long time exposure to extremely high or low temperature
may quickly deplete and shorten the battery life. To ensure the
battery’s optimal performance, ensure that it is exposed within
the recommended environment temperature.
E9024_ME170C_ME7010C_ME7010CX_UG.indd 2 2014/4/29 �� 03:31:18

ASUS Tablet
3
Package contents
NOTES:
• Ifanyoftheitemsisdamagedormissing,contactyour
retailer.
• *Thesecontentsvarywithcountryorregion.
Powercharger* Poweradapter*
ASUS Tablet
USER GUIDE
ASUS Tablet
Technical
documentations and
warranty card
MicroUSBcable*
E9024_ME170C_ME7010C_ME7010CX_UG.indd 3 2014/4/29 �� 03:31:18

ASUS Tablet
4
Touch screen panel
Your ASUS Tablet
Front view
Front camera
Audio speaker
Microphone
E9024_ME170C_ME7010C_ME7010CX_UG.indd 4 2014/4/29 �� 03:31:18

ASUS Tablet
5
Rear view
Micro USB 2.0 port
Volume button
Power button
Speaker/Headset port Rear camera
MicroSDcardslot*
* ThemicroSDcardslotsupportsmicroSDandmicroSDHCcardformats.
E9024_ME170C_ME7010C_ME7010CX_UG.indd 5 2014/4/29 �� 03:31:18

ASUS Tablet
6
Charging your ASUS Tablet
Using the power adapter and micro USB cable
To charge your ASUS Tablet:
Connect the micro USB cable to the power adapter.
Plug the micro USB connector into your ASUS Tablet.
Plug the power adapter into a grounded power outlet.
Charge your ASUS Tablet for eight (8) hours before
using it in battery mode for the rst time.
NOTE: The output voltage of this adapter is DC 5.2 V, 1.35 A, 7 W.
E9024_ME170C_ME7010C_ME7010CX_UG.indd 6 2014/4/29 �� 03:31:19

ASUS Tablet
7
Using the power charger
To charge your ASUS Tablet:
Plug the micro USB connector into your ASUS Tablet.
Plug the power charger into a grounded power outlet.
Charge your ASUS Tablet for eight (8) hours before
using it in battery mode for the rst time.
NOTE: The output voltage of this adapter is DC 5 V, 1 A, 5 W.
E9024_ME170C_ME7010C_ME7010CX_UG.indd 7 2014/4/29 �� 03:31:19

ASUS Tablet
8
NOTES:
• YourASUSTabletcanbechargedviatheUSBportona
computer only when it is in sleep mode (screen o) or turned
o.
• ChargingthroughaUSBportofacomputermaytakelonger
time to complete.
• Ifyourcomputerdoesnotprovideenoughpowerfor
charging your ASUS Tablet, charge your ASUS Tablet via the
grounded power outlet instead.
IMPORTANT!
• UseonlythebundledpoweradapterandmicroUSBcable
to charge your ASUS Tablet. Using a dierent power adapter
may damage your ASUS Tablet.
• Peeltheprotectivelmofromthepoweradapterandmicro
USB cable before charging the ASUS Tablet to prevent risk or
injury.
• Ensuretoplugthepoweradaptertothecorrectpoweroutlet
with the correct input rating.
• WhenusingyourASUSTabletwhileplugged-intoapower
outlet, the grounded power outlet must be near the unit and
easily accessible.
• DonotplaceobjectsontopofyourASUSTablet.
E9024_ME170C_ME7010C_ME7010CX_UG.indd 8 2014/4/29 �� 03:31:19

ASUS Tablet
9
Appendices
Federal Communications Commission
Statement
This device complies with FCC Rules Part 15. Operation is
subject to the following two conditions:
• Thisdevicemaynotcauseharmfulinterference.
• Thisdevicemustacceptanyinterferencereceived,including
interference that may cause undesired operation.
This equipment has been tested and found to comply with
the limits for a class B digital device, pursuant to Part 15 of the
Federal Communications Commission (FCC) rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur
inaparticularinstallation.Ifthisequipmentcausesharmful
interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by doing one or
more of the following measures:
• Reorientorrelocatethereceivingantenna.
• Increasetheseparationbetweentheequipmentand
receiver.
• Connecttheequipmentintoanoutletonacircuitdierent
from that to which the receiver is connected.
E9024_ME170C_ME7010C_ME7010CX_UG.indd 9 2014/4/29 �� 03:31:19

ASUS Tablet
10
• Consultthedealeroranexperiencedradio/TVtechnicianfor
help.
Changes or modications not expressly approved by the party
responsible for compliance could void the user‘s authority to
operate the equipment.
The antenna(s) used for this transmitter must not be co-
located or operating in conjunction with any other antenna or
transmitter.
RF Exposure Information (SAR)
This device meets the government’s requirements for exposure
to radio waves. This device is designed and manufactured not
to exceed the emission limits for exposure to radio frequency
(RF) energy set by the Federal Communications Commission of
the U.S. Government.
The exposure standard employs a unit of measurement
known as the Specic Absorption Rate, or SAR. The SAR limit
set by the FCC is 1.6 W/kg. Tests for SAR are conducted using
standard operating positions accepted by the FCC with the EUT
transmitting at the specied power level in dierent channels.
The highest SAR value for the device as reported to the FCC is
0.65 W/kg when placed next to the body.
The FCC has granted an Equipment Authorization for this device
with all reported SAR levels evaluated as in compliance with the
FCC RF exposure guidelines. SAR information on this device is
on le with the FCC and can be found under the Display Grant
section of www.fcc.gov/oet/ea/fccidaftersearchingonFCCID:
MSQK017.
E9024_ME170C_ME7010C_ME7010CX_UG.indd 10 2014/4/29 �� 03:31:19