AT&T Hot Joe PWS01 User manual

Portable Bluetooth®Speaker
quick
start guide
Hot Joe
model #: PWS01

Thank you for purchasing
Hot Joe [PWS01]
The AT&T brands are used under license.
Any repair, replacement, or warranty
service,andallquestionsaboutthisproduct
should be directed to Concept 101 LLC at
www.att.com/electronicsor call 1 [phone] from
the USA or Canada. Concept 101 LLC warrants that the
product will be free from defects in material, parts and
workmanship for the period of one (1) year from date
of purchase. Concept 101 LLC agrees that it will, at its
option,replacethe defective product with eithera new
or remanufactured product equivalent to your original
purchaseduringthewarrantyperiod. Pleasebe advised
thereturnedproductmustcarrytheproofofpurchase.
Portable Bluetooth®Speaker
Controls
1. Pair button
2. Bluetooth®LED indicator
3. AUX IN jack
4. Micro USB port for charging
5. Charge indicator
6. Power ON/OFF (bottom)
Charging & Power ON/OFF
1. Using the included micro USB cable, charge your speaker
by connecting it to any USB port on your computer, or a
USB wall adapter.
2. The Charge LED indicator will turn red to indicate that your
speaker is charging.
3. Once fully charged the Charge LED indicator will turn off.
4. Power ON/OFF your speaker by sliding the power switch at
the bottom of the speaker.
PAIR

Bluetooth®Pairing + Playing
ON OFF
IR
PAIR
PAIR
Bluetooth ON
Connected
Devices
Hot Joe
1. Power ON your speaker.
2. You will hear a tone from the
speaker and the Bluetooth®
LED indicator will be blinking
blue. The speaker is now
ready to be paired with your
Bluetooth®media player.
3. Navigate to the Bluetooth®
menu on your media player
or smartphone and select
“Hot Joe” from the menu.
4. The Bluetooth®LED
indicator on the speaker will
turn solid blue. You are now
connected! Hit play on your
media player and enjoy.
5. Press and hold the PAIR
button to pair a 2nd
Bluetooth®media player
or smartphone. The
Bluetooth®LED indicator will
blink blue and the speaker is
now ready to pair.
Note: Control your music playback and volume using the
native controls on your media player or smartphone.
Only one device can be connected at a time.

Bluetooth®LED Indicator Lights
Play Audio Through AUX IN Jack
1. Plug one end of a 3.5mm audio cable (not included) into
the AUX IN jack on the speaker and the other end into the
headphone jack of your media player.
2. Power on the speaker and press play on your media player.
3. Control your music playback and volume using the native
controls on your media player or smartphone.
Support
For any questions or support please visit
http://www.att.com/electronics and click on the Support tab.
Status
Power OFF
Ready to pair
Bluetooth®connected
Indicator
No light
Flashing blue light
Solid blue light
Concept 101 LLC does not warrant that the speaker will work
properlyin allenvironmentalconditions,and makes nowarranty
and representation, either implied or expressed, with respect
to the quality, performance, merchantability, or fitness for a
particular purposeother thanthe purposeidentifiedwithin this
user’smanual. Concept101 LLC hasmadeeveryeffort toensure
thatthis user’s manualis accurate anddisclaimsliability for any
inaccuraciesor omissionsthatmay haveoccurred. Information
in this user’s manual is subject to change without notice and
does not represent a commitment on the part of Concept 101
LLC. Concept101 LLCreserves therighttomake improvements
to this user’s manual and/or to the products described in this
user’s manual atanytime withoutnotice. Ifyoufind information
inthis manualthatis incorrect,misleading,or incomplete,please
contact us through our website.
TheBluetooth
®
word markandlogos areregisteredtrademarks
owned by Bluetooth SIG, Inc. and any use of such marks by
Concept 101 LLC is under license.

©2014Concept 101LLC.AllRightsReserved. AT&Tand the AT&T
logo are trademarks of AT&T Intellectual Property licensed to
Concept 101 LLC, New York, New York 10018. Issue 5.0 AT&T
11/2014.
www.att.com/electronics