AT&T MiFi 2372 User manual

AT&T Mobile Hotspot
MiFi® 2372
Quickstart
90026316_R1_MASTER_QSG_MiFi2372_AT&T.indd 1 10/7/10 4:07 PM

2
Welcome to AT&T
Thank you for purchasing an AT&T Mobile Hotspot,
MiFi 2372.
Please use this Quickstart to get a brief overview
of the major features of your new MiFi 2372 and
DataConnect service
OR
take advantage of our interactive web tutorials at
for the most complete and up-to-date device setup
information. The online tutorials include step-by-step
instructions and an easy search function to find what
you need quickly.
Thanks again for choosing AT&T.
att.com/Tutorials
90026316_R1_MASTER_QSG_MiFi2372_AT&T.indd 2 10/7/10 4:07 PM

3. Now, insert the battery, lining up the contact points.
4. Slide the battery door closed.
Getting Started
3
Insert the SIM and the Battery
1. Slide open the battery door on the back of the
device.
2. Insert the SIM card (if not pre-installed)
into the SIM slot as shown.
90026316_R1_MASTER_QSG_MiFi2372_AT&T.indd 3 10/7/10 4:07 PM

4
Charge the Battery
Connect the A/C charger to the device and charge for a
minimum of 4 hours before use. The LED will flash amber
while the device is charging and glow solid amber once
charging is complete.
90026316_R1_MASTER_QSG_MiFi2372_AT&T.indd 4 10/7/10 4:07 PM

Please note that the device is secure. Only users
who have the Wi-Fi Password/Key will be able to
connect to the Internet with the device. You can
find your device SSID and the Wi-Fi Key on the label
on the back of the device.
1. Ensure that the device is charged or connected to an electrical outlet.
2. Press the LED power button; the LED light will
turn on.
3. A blue Wi-Fi indicator on the front of the device
appears when ready to connect.
4. Select the SSID (i.e. MiFi 2372 XXXX) in your computer’s Wi-Fi Network
Connections list.
5. When prompted for a Password/Key from your Operating System,
enter the Wi-Fi Key from the label on the back of the device then click
Connect.
The blue Wi-Fi light will begin blinking when you have successfully
connected your laptop to the MiFi 2372. You are now ready to start using
the Internet.
5
Connecting to the AT&T Mobile Network
and Accessing the Internet
90026316_R1_MASTER_QSG_MiFi2372_AT&T.indd 5 10/7/10 4:07 PM

6
You can access the advanced features of your MiFi 2372 through the Web
Interface:
1. Launch your web browser (no Internet connection required).
2. Type att.mifi in the address bar and hit enter.*
3. Use password attmifi to log in (in the top right corner of the Web
Interface).
The Web Interface allows you to:
• View your data usage, your messages and the wireless device number
• Change your Wi-Fi Password/Key
• Enable GPS on the device
*Note: Alternatively, you can enter device IP address http://192.168.1.1.
Access Data Usage and Device Settings
90026316_R1_MASTER_QSG_MiFi2372_AT&T.indd 6 10/7/10 4:07 PM

7
Power/Connection LED
Wi-Fi LED
LED Indicators
__
GPRS/EDGE
UMTS/HSPA
Battery
Error
No Power
Battery charging
Battery fully charged
Connected to a roaming networkSolid:
Wi-Fi is off or plugged into USB portNo Light:
On and connectedFlashing:
Flashing:
Flashing: Low battery
Device is powered off
Flashing:
Flashing:
On with no users connectedSolid:
Solid:
Solid: Device error (See Troubleshooting
in the web tutorial)
Solid:
Solid:
Roaming service is available
Connected to a network using
UMTS/HSPA
Connected to a network using
GPRS/EDGE
UMTS/HSPA service is available
GPRS/EDGE service is available
Flashing:Roaming
Wi-Fi
GREEN
VIOLET
BLUE
BLUE
AMBER
RED
No Light
90026316_R1_MASTER_QSG_MiFi2372_AT&T.indd 7 10/7/10 4:07 PM

MiFi, the MiFi logo, Novatel Wireless and the Novatel Wireless logo are either registered
trademarks or trademarks of Novatel Wireless, Inc. © 2010 AT&T Intellectual Property.
All rights reserved. AT&T, the AT&T logo and all other AT&T marks contained herein are
trademarks of AT&T Intellectual Property and/or AT&T affiliated companies. All other
marks contained herein are the property of their respective owners.
PN90026316_R1
Need help?
On the Web
For more information about using your new device, please refer to
the interactive web tutorial available at att.com/Tutorials. Select
Manufacturer: Novatel Wireless and Model: MiFi 2372 from the drop-
down menus.
Additional support is available online including device specifications,
troubleshooting and user forums at att.com/DeviceSupport.
On the Phone
Call AT&T Customer Care at 800-331-0500 for assistance with your
AT&T service. Please enter the 10-digit wireless phone number
associated with your MiFi 2372 when prompted. This will direct your
call to a specialized Care team. The wireless phone number associated
with your DataConnect rate plan can be found:
• on your sales receipt
• on your monthly statement
• on att.mifi
90026316_R1_MASTER_QSG_MiFi2372_AT&T.indd 8 10/7/10 4:07 PM