AT&T Velocity User manual

User Guide
AT&T Velocity™
Mobile Hotspot

Copyright © 2014 ZTE CORPORATION.
All rights reserved.
No part of this publication may be excerpted, reproduced,
translated or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without the
prior written permission of ZTE Corporation.
The manual is published by ZTE Corporation.
We reserve the right to make modifications on
print errors or update specifications without
prior notice.
microSDHC is a trademark of SD, 3C-LLC.
Qualcomm®Gobi™ technologies are
products of Qualcomm Technologies, Inc.
Version No. : V1.1
Edition Time: December 2014
Get Started.........................................................1
Know Your Device ...............................................1
Manage Your Device and Settings ..............................3
Set Up and Connect to the Internet ............................8
Optional Autorun Installation (For USB use only)..............9
Use Your Mobile Hotspot ........................................15
AT&T Wi-Fi Manager Home Page ..............................15
Security Credentials............................................16
View Your Data Usage ..........................................17
Manage Wi-Fi®..................................................18
Message........................................................ 24
File Sharing..................................................... 25
Battery .........................................................28
Security ........................................................33
Configure Data Network Options.............................38
View Details ....................................................39
Replace the SIM Card .........................................42
Reset the Mobile Hotspot.....................................43
Advanced Settings ..............................................44
Manage Wi-Fi ..................................................44
Change Advanced Settings ...................................45
Contents
Contents i

Troubleshooting .................................................50
Specifications ...................................................52
Regulatory and Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . .53
To the Owner..................................................53
Using Your Device............................................ 54
Using Battery ................................................. 54
Radio Frequency (RF) Energy ................................55
FCC Compliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
CTIA Requirements...........................................57
Warranty........................................................ 59
Limited Warranty ............................................60
How to Get Warranty Service.................................61
Other Warranty Programs ....................................61
Contentsii
Get Started
This chapter provides an overview of the Velocity Mobile
Hotspot features, and instructions on how to set up your
mobile hotspot and connect to the Internet.
Know Your Device
Your mobile hotspot enables you to create a Wi-Fi network
anywhere there is cellular network coverage. You can use that
Wi-Fi network to connect your laptop and other Wi-Fi capable
devices to your network provider’s mobile broadband network
and connect to the Internet. You can also use your mobile
hotspot by connecting it to your laptop with the USB cable to
access the Internet.
Additional features include:
• Touch screen LCD interface — Configure basic Wi-Fi and
display settings, view data usage details, view system and
network provider messages.
• Wi-Fi Protected Setup (WPS) — A fast, easy way to connect
WPS-enabled devices to your Wi-Fi network.
• Guest Wi-Fi — Set up a guest Wi-Fi network for temporary
users, and use the main network for trusted devices.
Get Started 1

Get Started2
Power
button
WPS
buttonmicroSDHC™
Micro USB
charging port
Touch
screen
SIM card cover/
reset button
3Get Started
Manage Your Device and Settings
You can manage your device and change settings using:
• The device’s LCD touch screen — Configure basic Wi-Fi and
display settings, view data usage details, view system and
network provider messages.
• The AT&T Wi-Fi Manager home page — Web user interface for
configuring mobile broadband network settings and advanced
Wi-Fi and device settings.
Note: To personalize the mobile hotspot and change basic
settings, tap Settings or Wi-Fi on the LCD home screen. For
advanced settings, use a Wi-Fi enabled device to connect
to the mobile hotspot and then use a browser to display the
AT&T Wi-Fi Manager home page (http://attwifimanager). Log
in as Administrator to make changes (default admin login
is attadmin).
Power Button
Power Button Usage
Press and hold the Power button to power on/off the mobile
hotspot. Press the Power button to wake up the mobile
hotspot.
Status LED
indicator

LCD Touch Screen
Icons on the touch screen’s top row indicate the status of the
mobile hotspot, and several screen elements can be tapped or
swiped to configure Wi-Fi and device settings, view data usage
details, and view carrier messages.
Signal strength
Network indicator
New message
Tap for
usage details
Tap for WPS,
Guest Wi-Fi, and
other options
Tap to view
messages
Wi-Fi network
name &
password
Battery
Tap to change
display, file
sharing mode,
and other
settings
5Get StartedGet Started4
Customizable
data alert
LCD Home Screen Elements
Icon Indication
Network signal strength
Network type
Wi-Fi network
name and
Wi-Fi password
Used by Wi-Fi enabled devices to connect to
the mobile hotspot
New message received
Data usage for current billing period. Tap the
data bar to view detailed information.
Battery power indication
Wi-Fi menu
N umber indicates currently connected devices.
Tap to configure basic Wi-Fi settings.
Settings menu
Tap to configure basic device settings.
Tap to view carrier messages.

Status LED Indicator
The LED indicates the device’s connection status.
LED Indicator Patterns
Color Indicator Status
Green Blinking
Steady
Notifications
New SMS
S oftware update notification
Data usage notification
Battery fully charged
Red Blinking
Steady
Low battery
No SIM
SIM lock
SIM PIN/PUK enabled
Searching for network
No service
Limited service
Charging
7Get StartedGet Started6
Accessories
• Micro USB cable — Used for recharging the battery and
tethering the mobile hotspot to your computer.
• Wall charger — Used with the USB cable to recharge the
battery or to power the mobile hotspot from a wall outlet.
Micro USB cable Wall charger

Set Up and Connect to the Internet
Install the Battery
Remove the back cover.
Insert the battery as shown with
the contacts located against
the metal springs, and press the
battery down into the case.
Replace the back cover.
Note: The battery comes partially charged and ready to go.
When the battery needs recharging, follow the instructions in
Recharge the Battery on page 32.
9Get StartedGet Started8
Optional Autorun Installation
(For USB use only)
Power on the mobile hotspot and connect it to your
computer with the USB cable.
When prompted, tap OK on your device.
Click AT&T Velocity from the popout menu.
Click Run AutoRun.exe from the popout menu.
The tips displayed in the status bar show the installation
progress of the software. You may see the following
messages:
• Device is initializing...
• Create ShortCut...
• Running webGUI...
The hotspot automatically installs a desktop shortcut to the
PC and opens the AT&T Wi-Fi Manager home page in your
browser.
Note: You can also manually install by double clicking the
AutoRun.exe located in the CD drive under My Computer.
Once installation is complete, disconnect the device from
your computer.

Connect to the Internet
When your mobile hotspot is powered on, it automatically
searches for and connects to your network provider’s mobile
broadband network.
Connect your computer or other devices to your network.
a) Use the Wi-Fi application on your computer or other
wireless devices to search for the available wireless
network.
b) Select the Wi-Fi network name displayed on the mobile
hotspot screen, and then click Connect.
c) Input the Wi-Fi network password, which is located on the
mobile hotspot home screen, and click Next.
d) If prompted, choose whether you want to turn on sharing
between PCs or connecting to devices on the network.
Launch your browser to surf the Internet.
Connect Devices to Your Mobile Hotspot’s Wi-Fi
You can connect up to 10 wireless devices such as
smartphones, laptops, tablets, digital cameras, printers, gaming
consoles, and digital picture frames to your mobile hotspot’s
Wi-Fi network(s). (See Set Maximum Number of Connected
Devices on page 19 for instructions on setting connections for
the Main Wi-Fi and Guest Wi-Fi networks.)
You can connect:
• A wireless device to your Wi-Fi network by typing the Wi-Fi
password.
• A WPS-enabled wireless device by pressing the WPS buttons
on the mobile hotspot and the wireless device.
Note: You can also connect a single device directly to the
hotspot using the USB cable.
11Get StartedGet Started10

Connect a Wireless Device Manually
To connect a wireless device to your mobile hotspot’s Wi-Fi
network, see Connect to the Internet on page 10.
Connect a WPS-Enabled Wireless Device
If your wireless device supports WPS, you don’t have to input
the password manually to connect to the mobile hotspot.
On the Mobile hotspot:
Press and hold the WPS button on the mobile hotspot.
Select Pair with Main Wi-Fi or Pair with Guest Wi-Fi.
Press the WPS button on a device you want to connect to
your mobile hotspot.
Your mobile hotspot and the wireless device will communicate
and establish the connection.
Note: WPS can be modified under Wi-Fi > Main Wi-Fi Network
or Guest Wi-Fi Network.
On the AT&T Wi-Fi Manager home page:
On your laptop (or other Wi-Fi device), log in to
the AT&T Wi-Fi Manager home page by visiting
http://attwifimanager or http://192.168.1.1. The
default login is attadmin.
Click Settings on the navigation menu on the left side.
Click Wi-Fi > Basic tab.
Choose the WPS method you want to use:
• If the device you want to connect has a WPS button:
Click WPS Push button, and then within 2 minutes
(120 seconds) press the device’s WPS button.
• If the device you want to connect has a WPS PIN
associated with it:
Enter the device’s WPS PIN and click Enter WPS PIN.
Your mobile hotspot and the wireless device will
communicate and establish the connection.
13Get StartedGet Started12

Use Your Mobile Hotspot
This chapter describes the main features of the touch screen
and web interfaces for managing your mobile hotspot.
AT&T Wi-Fi Manager Home Page
You must be logged in as Administrator to change settings and
view detailed information.
• Default home page URL — http://attwifimanager
(or http://192.168.1.1)
• Default Administrator Login — attadmin
To log in as Administrator:
On the AT&T Wi-Fi Manager home page, place your cursor in
the Login field and type attadmin (the default Login).
Click Login.
15Use Your Mobile HotspotGet Started14

Security Credentials
The mobile hotspot uses three passwords:
• Wi-Fi password — Used to authenticate wireless devices
(notebook, etc.) to your mobile hotspot network. It is:
• Unique to your device.
• Displayed on the main mobile hotspot LCD screen. If
the screen is blank (a power-saving feature), press and
quickly release the Power button to view the information
on the screen.
• Printed on a label on the mobile hotspot (default password).
If you want to change the Wi-Fi password, see Change Wi-Fi
Network Names and Passwords on page 33.
• Guest Wi-Fi Password — When enabled, temporary users can
use this password to access the Guest Wi-Fi network. If you
want to change the Wi-Fi password, see Change Wi-Fi Network
Names and Passwords on page 33.
• Admin Login — Used to log into the AT&T Wi-Fi Manager home
page as Administrator. You must be logged in as Administrator
to use certain features and to make changes to your mobile
hotspot settings. The default admin login is attadmin. The
admin login can be changed to 4–32 characters.
You can change these passwords on the AT&T Wi-Fi Manager
home page (http://attwifimanager).
View Your Data Usage
You can view estimates of your data usage (not accurate for
billing purposes) on the mobile hotspot and the AT&T Wi-Fi
Manager home page.
The plan data counter resets automatically when the next billing
cycle starts.
To view detailed data usage information:
On the mobile hotspot home screen, tap the data usage bar.
On the Data Usage screen, swipe down/up to view all of the
details for:
• Data Alert — Receive a notification when you reach a
specified data usage point.
• My Device — View an estimate of your data usage.
• Disclaimer — View a disclaimer about data usage.
• Next Billing Date — See when your billing cycle resets
and how you're doing with data usage.
Tap to view
usage details
17Use Your Mobile HotspotUse Your Mobile Hotspot16

You can also view data usage information on the AT&T Wi-Fi
Manager home page under Data Usage. Click Data Usage for
more detailed information.
Manage Wi-Fi
View Connected Devices
You can view a list of devices connected to your mobile hotspot
on the mobile hotspot or the AT&T Wi-Fi Manager home page.
On the touch screen:
From the home screen, tap Wi-Fi.
Tap Connected Devices. A list of devices connected to the
Main Wi-Fi and Guest Wi-Fi networks appears.
To view the IP and Mac addresses of one of the devices, tap
the device name.
On the AT&T Wi-Fi Manager home page:
Log in as Administrator.
Select Connected Devices on the navigation menu on the
left side. A list of devices connected to the Main Wi-Fi and
Guest Wi-Fi networks appears on the screen. You can view
the IP and Mac addresses of the devices.
Set Maximum Number of Connected Devices
You can connect up to 10 wireless devices to the mobile
hotspot. These connections are shared between the mobile
hotspot’s Main and Guest Wi-Fi networks. You can customize
the distribution of devices from the mobile hotspot or the AT&T
Wi-Fi Manager home page.
On the mobile hotspot:
From the home screen, tap Wi-Fi.
Tap Max Wi-Fi Devices.
Tap or to adjust the maximum number of Wi-Fi
connections.
19Use Your Mobile HotspotUse Your Mobile Hotspot18

Tap next to Main or Guest to set the number of connections
you want available for each network.
Tap Save.
On the AT&T Wi-Fi Manager home page:
Log in as Administrator.
Click Home on the navigation menu on the left side.
In the Main and Guest Wi-Fi Max Devices section, click
the drop-down menu to adjust the maximum number of
Wi-Fi connections. Select next to Main Wi-Fi or Guest
Wi-Fi to set the number of connections you want available
for each network.
Click Apply.
Block/Unblock Devices
Note: Whenever you block or unblock devices, the Wi-Fi radio
resets to activate the new settings. Any devices connected
to the mobile hotspot will be disconnected when the Wi-Fi
radio resets.
You can block a device that is currently connected to your
mobile hotspot, and it will not be able to connect to your Wi-Fi
unless you choose to unblock it. Some reasons that you may
want to block a device include:
• Stopping them from overusing your bandwidth (and possibly
resulting in charges for overages on your plan).
• Temporarily blocking a child from surng the Internet. You can
block/unblock devices from the mobile hotspot or the AT&T
Wi-Fi Manager home page.
On the mobile hotspot:
To block a connected device:
From the home screen, tap Wi-Fi.
Tap Connected Devices. A list of devices connected to the
Main Wi-Fi and Guest Wi-Fi networks appears.
To block a listed device from connecting to your mobile
hotspot, tap the device name.
21Use Your Mobile HotspotUse Your Mobile Hotspot20

Tap Block.
Tap OK. The mobile hotspot will reset and the blocked device
will not be able to reconnect to access the Internet.
To unblock a device:
From the home screen, tap Wi-Fi.
Tap Connected Devices. A list of devices connected to the
Main Wi-Fi and Guest Wi-Fi networks appears.
At the bottom of the list (swipe up if required), tap Block List.
A list of blocked devices appears.
To unblock one of these devices so it can connect to your
mobile hotspot, tap the device you want to unblock.
Tap OK.
On the AT&T Wi-Fi Manager home page:
To block a connected device:
Log in as Administrator.
Select Connected Devices. A list of devices connected to the
Main Wi-Fi and Guest Wi-Fi networks appears on the screen.
To block a listed device from connecting to your mobile
hotspot, select the box for the device.
Click Apply > OK.
To unblock a device:
Select Connected Devices on the navigation menu on the
left side.
23Use Your Mobile HotspotUse Your Mobile Hotspot22

The Blocked Wi-Fi device(s) section shows all blocked
devices.
To unblock a listed device so it can connect to your mobile
hotspot, select the box for the device and click Apply > OK.
Message
View SMS Messages
You can view SMS messages on the mobile hotspot or AT&T
Wi-Fi Manager home page.
On the mobile hotspot:
To view or delete messages:
From the home screen, tap Messages.
Note: The Messages icon shows the number of unread
messages.
A list of messages appears, previewing the first portion of
the text.
Tap any message to read the full text.
If you want to delete the message, go to the bottom of the
message and tap Delete > OK.
On the AT&T Wi-Fi Manager home page:
To view or delete messages:
Log in as Administrator.
Click Messages on the navigation menu on the left side. A list
of messages appears.
For any message in the list, click the message to read.
If you want to delete the message, click the boxes in front of
the messages and select Delete.
File Sharing
File sharing allows you to share the files on a microSDHC card
via USB cable or web browser.
On the mobile hotspot:
To set share mode:
From the home screen, tap Settings.
Tap File Sharing.
Tap Share Mode, and select the desired share mode.
25Use Your Mobile HotspotUse Your Mobile Hotspot24

On the AT&T Wi-Fi Manager home page:
Sharing microSDHC card via USB cable:
Log into the AT&T Wi-Fi Manager home page.
Select File Sharing > Settings tab on the navigation menu on
the left side to set the sharing mode.
Select USB Only.
Click Apply to save the settings.
Connect the device to PC/tablet via USB cable.
Go to My Computer of your PC/tablet to access all files on the
microSDHC card.
Note: You can access the microSDHC card via USB cable
only in USB mode. The web page for sharing content on the
microSDHC card will be disabled.
Sharing microSDHC Card via Web Browser
Select File Sharing > Settings tab.
Select Wi-Fi Only.
Set Path to Share and Access Type.
Click Apply to save the settings.
Launch the browser on your PC/tablet/smartphone
connected to the device via Wi-Fi and enter
http://attwifimanager or http://192.168.1.1 in the address bar.
27Use Your Mobile HotspotUse Your Mobile Hotspot26

If you are still logged in, select File Sharing > File Browser tab.
Otherwise, click Access the files on the SD Card on the login
window to access the files on the microSDHC card.
Battery
Battery Life
The mobile hotspot is configured (by default) to optimize
battery life. Battery life is affected by:
• Standby time
• Data throughput
• Mobile broadband signal strength (the better the signal, the
longer the battery life)
Wi-Fi Range
• Long — Extends Wi-Fi range but decreases battery life.
• Medium — Balances Wi-Fi range and battery life.
• Short — Reduces Wi-Fi range but extends battery life.
There are several methods you can use to extend the
battery life:
• Adjust Wi-Fi settings:
• Shorten the Wi-Fi range — If the devices you are connecting
to your Wi-Fi network are always near the mobile hotspot
device, shorten the Wi-Fi range.
• Set the Wi-Fi Standby timer to a shorter period — Reduce
the amount of time to wait when no devices are connected
to either Wi-Fi network before going into sleep mode
(Wi-Fi radio powers off).
• Adjust display settings:
• Dim the screen — Reduce the LCD’s brightness level.
• Set the Display Timeout to a shorter period — Reduce the
amount of time to wait without the LCD being used before
the screen goes dark.
• Hide the info shown on the home screen — Reduce the info
shown on the home screen.
Extend Battery Life
You can choose Wi-Fi and display settings on the mobile
hotspot or the AT&T Wi-Fi Manager home page to extend the
mobile hotspot’s battery life.
On the mobile hotspot:
From the home screen, tap Wi-Fi.
29Use Your Mobile HotspotUse Your Mobile Hotspot28

Adjust these settings:
• Wi-Fi Sleep Mode — Select a shorter time period. The shorter
the time, the longer the battery life.
• Wi-Fi Range — Select Medium or Short.
Go back to the home screen and tap Settings > Display.
Adjust these settings:
• Screen Brightness — Tap or to adjust the brightness.
• Display Timeout — Select a shorter time period.
• Wi-Fi Info on Home — Choose between Show or Hide.
On the AT&T Wi-Fi Manager home page:
Log in as Administrator.
Click Settings on the navigation menu on the left side.
Click Wi-Fi > Advanced Settings tab.
Adjust these settings in the Security Settings section:
• Wi-Fi Coverage — From the drop-down box, select Short.
• Sleep Mode — From the drop-down box, select a shorter
time period.
31Use Your Mobile HotspotUse Your Mobile Hotspot30

Recharge the Battery
The battery comes partially charged. You can recharge
the battery from a wall outlet or from the USB port on your
computer.
To recharge the battery from a wall outlet (faster option):
Attach one end of the micro USB cable to the mobile hotspot
and attach the other end to the wall charger (included).
Plug the wall charger into a wall outlet.
The battery icon on the LCD screen indicates when the battery
is fully charged ( ) and an alert is displayed.
To recharge the battery from the USB port on your computer:
Attach one end of the micro USB cable to the mobile hotspot
and plug the other end into the USB port on your computer.
The battery icon on the LCD screen indicates when the battery
is fully charged ( ) and an alert is displayed.
Security
Change Wi-Fi Network Names and Passwords
You can customize the network names and passwords for the
Main and Guest Wi-Fi networks on the AT&T Wi-Fi Manager
home page.
Change Main Wi-Fi Name and Password
On the AT&T Wi-Fi Manager home page:
Log in as Administrator.
Click Settings on the navigation menu on the left side.
Click Wi-Fi > Basic tab.
Change the Main Wi-Fi network name and/or password.
Click Apply.
Note: If you changed the Wi-Fi network name or password, all
connected devices will be disconnected and have to reconnect.
33Use Your Mobile HotspotUse Your Mobile Hotspot32

Change Guest Wi-Fi Name and Password
If you are using the Guest Wi-Fi profile, you can change the
Guest Wi-Fi name or password from the AT&T Wi-Fi Manager
home page.
Note: By default, the Guest Wi-Fi name is the same as the Main
Wi-Fi name, with “-GUEST” appended.
On the AT&T Wi-Fi Manager home page:
Log in as Administrator.
Click Settings on the navigation menu on the left side.
Click Wi-Fi > Basic tab.
Change the Guest Wi-Fi network name and/or password.
Click Apply.
Note: If you changed the Wi-Fi network name or password, all
connected devices will be disconnected and have to reconnect.
Change AT&T Wi-Fi Manager Home Page Access Settings
You can customize the Admin Login used to access the AT&T
Wi-Fi Manager home page.
On the AT&T Wi-Fi Manager home page:
Log in as Administrator.
Click Settings on the navigation menu on the left side.
Click Advanced > Administrator tab.
If desired, change the admin login (maximum 32 characters).
Click Apply.
Note: If you forget the admin login, you will need to perform a
hardware reset.
35Use Your Mobile HotspotUse Your Mobile Hotspot34