Atdec APA-B User manual

APA-B Page 1 of 2
Installation Guide
APA-B
POS Base
IMPORTANT INFORMATION
!Please ensure this product is installed as per these installation instructions.
!The manufacturer accepts no responsibility for incorrect installation.
!This product is not suitable for outdoor use.
!Do no use this product for mobile applications.
! This product requires additional accessories, sold seperately.
COMPONENT CHECKLIST
REQUIRED TOOLS
• Phillips head screwdriver
WEIGHT RANGE
0 - 10kg
(0 - 22lb)
A
Tilt Head
B
Base Plate
E
Mounting Pad
F
M6x6mm
Screw
(x1)
G
Self-Tapping
Screw
(x 4)
H
4mm
Hex Key
C
Spacer
D
Plate Cover

APA-B Page 2 of 2
1. Select installation type
2. Mount Base Plate
3. Attach Plate Cover
No portion of this document or any artwork contained herein should be reproduced in any way without
the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer
reserves the right to alter specications without notice. ©20220816
D
B
OR
F
Customer
Direction
Customer
Direction
F
sold
seperately
Use Hex
Key H to
adjust tilt
if required
A
C
4. Mount Tilt Head
5. Install Locking Screw 6. Attach Accessory
For 310° Rotation
Customer
direction
Cable hole
For Fixed Position
Customer
direction
Select an install type
and position Base Plate
Baccordingly
NOTE: Cables should be
routed before mounting
B
G
OPTION 1:
Mount Base Plate
with Self-Tapping
Screws Gonto desk
OPTION 2:
Stick Mounting Pad E
to Base Plate before
mounting on desk surface.
E
B
NOTE: Plate Cover
Dcan be placed
to 90˚ increments
around the mount
OPTIONAL:
Add Spacer C
if extra height
is desired
OR