ATEQ VT67 User manual

Pg. 1
TPMSTOOL
USER MANUAL
Rev. 1 OCT-2021

Pg. 2
TABLE OF CONTENTS
1. Overview..........................................
 1.1.Specicaons......................
 1.2.KitContents........................
 1.3.SafetyInformaon.............
2. Tool Controls....................................
3. Connecng the Tool to WiFi........
4. Registering & Updang the Tool.
5. Selecng a Vehicle.........................
 5.1.viaManualSelecon.........
 5.2.viaVINScan........................
6. Main Vehicle Screen.......................
7. Reset TPMS.....................................
 7.1.ManualRelearn...................
 7.2.OBDIIRelearn.....................
8. Program.............................................
 8.1.SelecnganAMSensor....
 8.2.Create...................................
 8.3Copy.......................................
 8.4CreateSet.............................
 8.5.CopySet..............................
 8.6.ManualID............................
 8.7.RetrieveID...........................
9. Diagnoscs.......................................
 9.1.Keyfob..................................
 9.2.TPMSDTCs.........................
 9.3.PlacardAdjustment............
 9.4.TPMSIDMatch..................
 9.5.RFDetecon.......................
...........................3
...........................3
............................3
............................4
...........................5
...........................6
...........................7
...........................8
............................8
............................9
.........................10
.........................11
.........................12
.........................13
........................14
.........................15
.........................16
.........................17
.........................18
.........................19
.........................21
.........................22
........................23
.........................24
.........................25
.........................26
.........................28
.........................29
 9.6.TrailerTPMS...........................
10. Tire Management............................
 10.1.TireTreadDepth.................
 10.2.DOT(Auto)...........................
 10.3.DOT(Manual)......................
 10.4.WheelInspecon................
11. Report................................................
 11.1SengUpEmail...................
 11.2SendingaReport..................
12. Support..............................................
 12.1.ContactSupport..................
 12.2.Help.......................................
 12.3.Training..................................
13. Sengs..............................................
14. User Manual & Quickstart Guide
15. Warranty............................................
.........................30
.........................31
.........................32
.........................33
.........................35
.........................36
.........................37
.........................38
.........................40
........................41
.........................42
.........................43
.........................44
.........................45
.........................46
........................47

Pg. 3
1.OVERVIEW
1.1 SPECIFICATIONS
Baery Type Li-Po4.2V3000mAh
Baery Life Approximately1,000acvaonspercharge
Dimensions (L,W,D) 6”x10”x1.625”(15.25cmx25.5cmx4.15cm)
Case Material HighImpactABS
Response Frequency 315MHZand433.92MHz
Low Baery Indicaon LCDDisplay
Weight Approx.2lbs.(0.9kg)
Temperature Operaon:-4°Fto131°F(-20°Cto+45°C)
Storage:-4°Fto131°F(-20°Cto+45°C)
Altude MaximumOperangAltude:10,000(3000m)
Environment Indoor/OutdoorUse(<80%Humidity)
1.2 KIT CONTENTS
•TPMSTool
•OBDIIQuickConnectCable
•USB-CCable
•UniversalCharger

Pg. 4
READ THESE SAFETY INSTRUCTIONS BEFORE USING
THE DEVICE
IMPORTANT:Beforerstuse,theuserwillbeprompted
toconguretheregionalvehicledatabaseandUHFRFID
frequencysengsaccordingtothegeographiclocaon
wherethetoolwillbeoperated.Aproperconguraon
willpreventunauthorizedradiofrequenciesinviolaon
oflocallaws(exampleGermanneregulaonsTKG§148
and§149).
Itisunderthesoleresponsibilityoftheusertodeclare
thecorrectregionalsengs,beforeoperangthetool.
Themanufacturercannotbeconsideredliableforany
non-compliancewithlawsorregulaons,duetotheuse
ofothersengs.
WARNING:Thisproductemitselectromagnecand
electronicallygeneratedwavesthatmayinterferewith
thesafeoperaonofpacemakers.Individualswith
pacemakersshouldNEVERUSEthisproduct.
WARNING:Donotuseonliveelectricalcircuits.
WARNING:Users/bystandersmustwearsafetygoggles.
WARNING:Riskofentanglement.
-Usethedeviceonlyinitsnormaloperangposions
andunplugitbeforeaempngtoserviceorcleanit.
-Keepyourdeviceanditsenhancements(chargers,
Lithium-polymerbaeries,etc.)outofthereachofsmall
childrenastheymaycontainsmallparts.
-Onlyusethechargersuppliedwithyourdevice.Using
anothertypeofchargerwillresultinmalfunconand/or
danger.
-Donotusethechargerinahighmoistureenvironment.
-Nevertouchthechargerwhenyourhandsorfeetare
wet.
-Donotcoverthechargerwithpaperorotherobjects
thatwillreducecooling.Makesurethereissucient
venlaonwhenoperangthecharger.Donotusethe
chargerwhileitisinsideacarryingcase.
-Connectthechargertoaproperpowersource.The
voltagerequirementsarefoundontheproduct.
-Donotusethechargerifthewiresbecomedamaged.
Donotaempttoservicetheunit.Replacetheunitifit
isdamagedorexposedtoexcessmoisture.
-Donotusethechargertochargeotherappliances.
-Donotdisassemble,crush,pierceordisposeofthe
baeryortheinstrumentinreorwater,donotshort
circuitorthecontactswithametalobject.
-Duringthechargingprocess,posionthedeviceto
alloweasyaccesstounplugthecharger.
-Neverleavethebaeryunaendedduringthecharging
processandleaveitcooldown.Ifthebaerybegins
tooverheatmorethan60°C(140°F),stopcharging
immediately.Incaseofanysmokeorliquidcomingfrom
thebaery,disconnectit,stopcharging,donotusethe
baeryagainandreturnyourdevicetoyourretailer.
-Cleanwithasodrycloth,orifnecessary,asodamp
clothwithcleanwater.Donotuseanyharshchemical
solventssuchasacetone,thinner,brakecleaner,alcohol…
asthismaydamagetheplascsurface.
-Donotusethistoolwherecontactorimmersionin
waterisapossibility.Neverspillliquidofanykindonto
thetool.
-Donotuseorstorethetoolinanareawhereitis
exposedtodirectsunlightorexcessivemoisture.
-Toreducetheriskofre,donotoperatethetoolinthe
vicinityofopencontainersorammableliquids.Donot
useifthepotenalforexplosivegasorvaporsexists.
WARRANTY
Validwarrantyclaimsareprocessedthroughthepointof
purchaseduringtherst30daysaerpurchase.Please
contactyourpointofpurchasefortechnicalassistance.
Theenrewarrantyperiodofyourdeviceisoneyear,itis
non-transferableandlimitedtotheoriginalpurchaser.
Nodealer,agent,oremployeeisauthorizedtomake
anymodicaon,extensionoraddiontothiswarranty.
Notethatthewarrantydoesnotcoverproblemsor
damageresulngfrom(1)accident/abuse/misapplicaon/
unauthorizedrepair/modicaon/disassembly;
(2)improperoperaon/maintenance/usagenotin
accordancewithproductinstruconsorconnecon
toimpropervoltagesupply;or(3)useofconsumables
(replacementbaeries…)
RECYCLING
Helpustoprotecttheenvironment:
-Donotdisposeoftherechargeablebaery,thetool
and/oritsaccessoriesinthegeneralwaste.
-Takeyourtoolandanyenhancementsmarkedwiththis
symboltoseparatecolleconattheendoftheproduct’s
servicelife.
-Donotdisposeofyourproductsasunsortedmunicipal
waste.
Forfurtherinformaonpleasecontactthepointofsale.
DECLARATION OF CONFORMITY
Themanufacturerofthetooldeclaresthatthedeviceis
inconformitywith:
-RadioEquipment(RED)Direcve2014/53/EU
-Restriconofhazardoussubstances(RoHS)Direcve
2011/65/EU
-FCCPART15B:2019
-FCCPART15.247:2019
-FCCPART15.407:2019
-FCCPART15.207/209:2019
1.3 SAFETY INFORMATION

Pg. 5
2.TOOLCONTROLS
FRONT
BACK
TOP
TouchScreen
Trigger/AcvaonBuon
Back/CancelBuon
Speaker
ToolInformaon
BackCamera/Flash
USB-CChargingPort
RJ45AccessoryPort
OBDIIPort
PowerBuon
Antenna
FrontCamera

Pg. 6
3.CONNECTING THE TOOLTO WIFI
1 2 3
Fromthemainmenuofthetool,
select“History/Sengs”
Then,whenintheSengsmenu,
select“OtherSengs”attheboom
ofthescreen.
Thiswilltakeyoutothetool’s
addionalsengs.Fromhere,select
WiFiatthetopofthescreen.
4 5 6
SelectyourpreferredWiFinetwork,
andenterthepassword.Once
nished,select“CONNECT”.
Onceconnected,yourWiFinetwork
namewillbedisplayed.Toreturnto
thetool,pressthebacktriangleicon
attheboomofthescreen,orpress
thebuononthetoolitself.
Backonthetool,youwillseethe
WiFiiconatthetopofthescreen
hasbeenupdated,indicangyour
toolisnowconnectedtoWiFi.

Pg. 7
4.REGISTERING & UPDATING THE TOOL
1 2!
Fromthemainmenuofthetool,
select“History/Sengs”
TheUpdatescreen
providesasimpleand
easy-to-usemenufor
bothregisteringand
updangthetool.
Tapeachseconto
enterregistraoninfo,
aswellastapthe
“UpdateNow”buon
tobeginupdangthe
tool.
Note:Aempngtoregisterorupdatethe
toolbeforeconnecngtoWiFiwilldisplay
anerrormessage.See previous secon on
Connecng the Tool to WiFi.
RegistraonInfo
ToolSerial#
&CurrentVersion:
UpdateTool
ToolInfo
RenewAnnual
Subscripon
Then,whenintheSengsmenu,
select“Update”attheboomofthe
screen.

Pg. 8
5.SELECTING AVEHICLE
5.1 VIA MANUAL SELECTION
1 2 3
Fromthemainmenuofthetool,
select“VehicleSelecon”
FromtheVehicleSeleconmenu,
selectthevehicle’sMake.
Then,selecttheModel.
4
Then,selecttheyear.
5
Lastly,selectthenumberofwheels.

Pg. 9
*NorthAmericaOnly*
5.2 VIA VIN SCAN
1 2 3
Fromthemainmenuofthetool,
select“VehicleSelecon”
FromtheVehicleSeleconmenu,
selecttheVINiconattheboom
rightofthescreen.
Thetool’sbackfacingcamerawill
turnon.Aligntheredbarwiththe
vehicle’sBarcode/QRCode.
*
Inlowlightsituaons,theFlashicon
attheboomrightcanbepressedto
helpilluminatethearea.
4
Thevehicle’sMake,Model,andYear
willbeautomacallyselected.Lastly,
selectthenumberofwheels.

Pg. 10
6.MAIN VEHICLE SCREEN
Aerselecngthevehicle’smake,model,andyear,themainvehiclescreenwillbedisplayed.Thisscreenisaone
stopshopforallofthefunconsonthetool.
Back/Home
Main
Funcons
InteracveVehicle
TriggerBuon SensorInfo
(ID,Pressure,TemperatureFrequency,Baery)
Camera&
PhotoViewer
TireSet
Selecon
Customer/JobInfo VehicleInfo

Pg. 11
7.RESET TPMS
ResetTPMSisusedtoperformbothmanualandOBDIIrelearns.ByselecngManualorOBDII,thetoolwilltake
youthroughtheprocessstep-by-stepwithinstruconsandvisualaids.*Note:Notallvehiclessupportbothopons.
MANUAL OBDII
Manualrelearnsrequirethevehicletobeputintoa
“learnmode”byperformingaseriesofsteps.Once
allstepshavebeencompleted,readallthesensorsto
completetheprocess.
OBDIIrelearnsrequiretheuseoftheincludedOBDII
QuickConnectCabletocompletetheprocess.Simply
scanallofthesensors,plugtheOBDcablein,and
selectBeginProceduretotransfertheinformaon.

Pg. 12
7.1 MANUAL RELEARN
1 2 3
FromtheResetTPMSmenu,select
theManualdrop-downmenu.
Followtheinstruconstoputthe
vehicleintolearnmode.Once
nished,selectBeginProcedure.
Beginbytriggeringtherstsensor
menonedintheinstrucons.The
instruconscanbereturnedtoat
anypoint.
4
Inmostcases,thehornwillhonk
oncetoindicatethatthesensorhas
beensuccessfullytriggered.The
sensorinformaonwillbedisplayed
on-screen.
5
Connuebytriggeringtheremaining
sensors.Oncecomplete,thehorn
willhonktwiceindicangthe
procedureiscomplete.
FormanyMakesandModels,thevehiclemustbeputintoa“learn”modebeforethesensorscanberelearned.The
toolprovidesinstruconsonhowtoperformtheseprocedures.*Note:Notallvehicle’shaveManualproceduresand
manyproceduresaredierent.Refertothetool’sbuilt-ininstruconsforeachspecicprocedure.

Pg. 13
7.2 OBDII RELEARN
1 2 3
BeginbytriggeringtheLFsensoron
thevehicle.
ConnuebytriggeringtheRF,RR,
andLRsensors.*ForHonda/Acura:
LR,RR,andRF.
SelecttheResetTPMSmenuand
selecttheOBDIIdrop-downmenu.
4
SelectBeginProcedure.*Note:Ifall
sensorshavenotbeentriggeredyou
willbetakenbacktothemainvehicle
screentonishtriggering.
5
ConnecttheOBDIIQuickConnect
Cabletothetopofthetool,then
intothevehicleandselectRelearn.
OBDIIRelearnsrequireuseoftheOBDIIQuickConnectCableandareperformedbytriggeringeachsensor,then
connecngthecabletothetool/vehicletocompletetheprocedure.*Note:Notallvehicle’shaveOBDIIprocedures
andsomeproceduresaredierent.Refertothetool’sbuilt-ininstruconsforeachspecicprocedure.
6
Aerafewmoments,allofthe
sensorswillhavebeensuccessfully
relearnedtothevehicle.
a
B

Pg. 14
8.PROGRAM
ProgramiswhereallOEMandAermarketsensorfunconsarefound.Programavastarrayofaermarketsensors
inavarietyofdierentways,andevenviewOEMsensorandServiceKitinformaon.Allsensorsincludeimagesand
partnumberstohelpwithidencaon.*Note: Not all aermarket sensor brands share the same funcons. This
secon will provide examples of each available funcon.
ProgramAermarketSensors
Viewvehicle-specicOEMsensorandservicekitinformaon

Pg. 15
8.1 SELECTING AN AFTERMARKET SENSOR
1 2
3
First,selectasensorbrandfromtherighthand
sideoftheProgrammenu.
Dependingonthesensorbrand,alistofcompable
sensorswillbedisplayed.Selectthesensormodel
youareworkingwithandhitProgram.
Onceasensormodelisselected,youwillnowbeable
toselectalltheavailableprogrammingfuncons.
TheProgramseconhasadynamictwo-sidedmenuthatallowsyoutoeasilyswapbetweensensors.Inorderto
accessthevariousprogrammingfuncons,asensormustrstbeselected.
B
A

Pg. 16
8.2 CREATE
1 2
First,selectCreatefromtheProgram
menu.
Placethesensorabovethetool’santennaandselectProgram.
3
Aerafewmomentsthenewsensor
IDwillbedisplayedandthesensor
willbesuccessfullyprogrammed.
CreateallowsyoutoprogramanewIDtoablankaermarketsensor.SensorIDscanalsobeoverwrien,if
programmedagainforadierentvehicleorapplicaon.

Pg. 17
8.3 COPY
CopyallowsyoutocopytheIDfromanexisngsensor,andpasteittoablankaermarketsensor.
1 2
First,selectCopyfromtheProgram
menu.
Placetheoriginalsensorabovethetool’santennaandselectCopy.You
canalsocopythesensorIDfromtheoriginalsensorifitissllinstalled
inthewheel.
OR
3
TheoriginalsensorIDwillbe
displayed.SelectProgramCopiedID.
4
Placethenewsensorabovethetool’santennaandselectProgram
CopiedID.AerafewmomentsthenewsensorIDwillbedisplayed
andthesensorwillbesuccessfullyprogrammed.

Pg. 18
8.4 CREATE SET
1
First,selectSetfromtheProgram
menu.
4
Placetherstsensorabovethe
tool’santennaandpresstheprogram
buon.
CreateSetallowsyoutoprogramnewIDsto4blankaermarketsensorsallonthesamescreen.
2 3
Then,selectCreateSet. Thetoolwilldisplayachartwith4
wheelsandaprogrambuonfor
each.
5
Aerafewmomentsthesensorwill
besuccessfullyprogrammedandthe
toolwilldisplaythesensor’sID.
6
Repeatstep4fortheremaining3
sensors.

Pg. 19
8.5 COPY SET
1
First,selectSetfromtheProgram
menu.
4
Placetheoriginalsensorabovethetool’santennaandselectCopy.Youcan
alsocopythesensorIDfromtheoriginalsensorifitissllinstalledinthe
wheel.
CreateSetallowsyoutoprogramnewIDsto4blankaermarketsensorsallonthesamescreen.
2 3
Then,selectCopySet. Thetoolwilldisplayachartwith4
wheelsandacopybuonforeach.
ThecopiedsensorIDwillbe
displayed.TheTOBECOPIED
columnwillnowallowyouto
programanewsensorforthat
wheel.
5
OR

Pg. 20
6
Placethenewsensorabovethetool’santennaandselectProgram.
Aerafewmomentsthenewsensorwillbesuccessfullyprogrammed.
7
Repeatsteps4-6fortheremaining3
sensors.