Atlantis Super User manual

CAUTION: Before using the water dispenser, read this manual and follow all operating
and safety instructions.
INDIAS FIRST
THE FINGER
DISTANCE
WATER DISPENSER
USER MANUAL
WATER DISPENSERS
WORKS WITHOUT TOUCH
Merchant copy
Customer copy
SUPER BIG PLUS JUMBO
PLUS
FROSTY
PLUS
BLUE PRIME PRIME
TABLE TOP
Model :
Name of Purchaser :
Date of Purchase :
Serial No. of Unit :
Name and Address of the Seller :
Seller’s Stamp & Signature :
Model :
Name of Purchaser :
Date of Purchase :
Serial No. of Unit :
Name and Address of the Seller :
Seller’s Stamp & Signature :
THE VENDING COMPANY
Plot No. - 28, Sector -4, IIE, Sidcul, Pantnagar,
Rudrapur, Uttarakhand - 263145,
INDIA.
Manufactured By:
THE VENDING COMPANY
Plot No. - 28, Sector -4, IIE, Sidcul, Pantnagar,
Rudrapur, Uttarakhand - 263145,
INDIA.
Manufactured By:

Disclaimers:
Accessories shown are not part of the standard product package.
Actual design, colour and specification may vary from the sketches shown.
The picture are used for representation purpose only.
Note: The machine specifications are subject to change without notice.
Current Publication: July 2021
First Published: April 2017
THE VENDING COMPANY
Plot No - 28, Sector- 4, IIE, Sidcul, Pantnagar,
Rudrapur - 263153, Uttarakhand,
INDIA.
Call : [phone]
VENDING UPDATES INDIA PVT. LTD.
B-23, Sector - 88, Phase II, Noida - 201305,
District Gautam Budh Nagar, Uttar Pradesh,
INDIA.
Plot No. - 35, Sector - 155, Noida - 201310,
District Gautam Budh Nagar, Uttar Pradesh,
INDIA.
Customer Care
e-mail: [e-mail]
Call : [phone]
SCAN THIS QR CODE
FOR PROGRAMMING
SCAN THIS QR CODE
FOR MORE FEATURES
2
Marketed By:
Manufactured By:
INDEX
3
Letter From The Company
Important Safeguards
Operating Instructions
Installing The Water Bottle
Important Notice About Leaking Bottles
Adjusting The Temperature (cold Water Only)
Cleaning And Maintenance
Led Function Indicators
Technical Specifications
Exploded View Of Machine With Part Names
Troubleshooting Tips
Troubleshooting Tips - Airpress
Disposal Of Machine
Frequently Asked Questions
Warranty Card
Warranty Instructions For User
Customer Details
04
04
06
06
07
08
09
10
11
12
14
15
16
16
18
18
19
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
S. NO. TOPIC PAGE NO.

Please read the enclosed operating instructions carefully and retain this
booklet for future reference.
We have carefully engineered your Bottled Water Dispenser to give you
years of service and trouble free operation.
IMPORTANT SAFEGUARDS
Never turn the dispenser upside down or tilt more than 45 degrees. If
unit has been resting on its side for an extended period of time, place
the water dispenser in the upright position for approximately 12 hours
before turning it on.
5
LETTER FROM THE COMPANY
Please read the
User manual prior
to using the machine.
In the event of any
service matter see
service manual.
Ensure staff access to
user manual !
4
• For use with 10-25 liter water bottles and most water filtration systems ,
(not included).
• Never use this dispenser with water that is unsafe to drink or is from an unknown
source.
• Never use any other liquid in the dispenser other than known & microbiologically
safe bottled water.
• Never allow children to dispense hot water without proper and direct supervision.
• This water dispenser is equipped with a grounded power cord plug for your safety.
It must be plugged into a grounded outlet.
Do not use an extension cord with your water dispenser.
WARNING: When positioning the appliance, ensure the supply cord
is not trapped or damaged.
• Keep your water dispenser in a dry place away from direct sunlight.
• Never put anything flammable close to the dispenser.
• Leave a minimum of 2” (5 cm) space around the back and sides of the
dispenser for proper ventilation.
To avoid water overflow when cleaning your
dispenser, always remove the bottle support
funnel before pouring water cleaning solution
into the reservoir.
WARNING: Do not locate multiple portable socket-outlets or portable
power supplies at the rear of the appliance
• Always install your water dispenser on a level floor. Wait for three
minutes before restarting machine after shutting down.
• Always unplug the water dispenser before servicing or cleaning.
• Regular cleaning of your water dispenser is required for your warranty.
Please follow cleanin g instructions outlined in this manual and clean
the dispenser every 4 months.
Congratulations on your purchase of the
Atlantis Bottled Water Dispenser.
This product has been engineered
for optimum and convenient performance.
We assure you years of satisfactory and
trouble free performance.
This appliance is intended to be used in
household and similar applications such as:
– staff kitchen areas in shops, offices and
other working environments, farm houses.
– by clients in hotels, motels and other
residential type environments.
– bed and breakfast type environments.
Please be sure to follow the instructions in the operating guideline
for a long life of the product.
We do hope that you will enjoy using your Atlantis Bottled Water
Dispenser.
Do not switch on the hot water until water runs out from the red tap
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with
the appliance

IMPORTANT NOTICE ABOUT LEAKING BOTTLES
If you find that your dispenser is leaking, check the water bottle first !
Almost all 10-25 liter water bottles are recycled, and handled extensively
during cleaning, filling, and shipping. As a result they are very prone to
developing pin holes or small cracks that can cause an overflow (or leak)
when placed on top of a water dispenser.
In almost all cases, there is nothing wrong with your water
dispenser. If you are experiencing a leak, this simple test
will allow you to determine whether your water bottle or
dispenser is the source of the problem.
1. Unplug the unit, turn off power switch and remove the water bottle.
2. a) Remove the bottle support funnel and check the
water level inside the reservoir – it should be at roughly
three-quarters full.
b) Please add or drain a few glasses of water to achieve
the required fill level. Water level should be
approximately 3/4” – 1” BELOW VENT TUBE
3. Let the water sit for approximately 2 hours. If the
dispenser does not leak, it is the bottle that is leaking
due to a small crack or pinhole.
Please contact your water supplier for a replacement
bottle.
2.a
Vent Tube
Water Level
2.b
1.
DISPENSING WATER
1. Place a glass under the tap for water, press the lever until the desired
amount of water is dispensed.
oo
2. Plain water temperature will be around 4 C to 6 C lower compared to
bottle water temperature.
7
OPERATING INSTRUCTIONS
Initial Product Cleaning Procedure
As with most new appliances, it is recommended to
clean the reservoir prior to first time use.
IMPORTANT: To avoid water overflow while cleaning the dispenser,
always remove the bottle support funnel before pouring water or
cleaning solution into the reservoir.
1. Press all dispensing buttons until water no longer comes out.
2. Drain the reservoirs from the drain valve on the back of the unit. (in hot &
cold unit only)
3. Rinse again with clean water.
4. Place bottle support funnel back on top of dispenser.
INSTALLING THE WATER BOTTLE
IMPORTANT: Always wash your hands first! Clean the top (neck) of the bottle
with a clean cloth and do not touch the part of the unit that the water touches.
Make sure the unit is unplugged and power switch is in the OFF position.
The water bottle can be purchased from your local retailer.
1. Remove the protective cap from the end of the water bottle unless the bottle
has a puncturable cap or sticker.
2. Lift and turn the bottle upside down, placing it securely on the bottle support
funnel
3. Press and hold all dispenser buttons until water flows from the dispenser.
Drain about 0.3 gal / 1 L of water before initial use. This does not need to be
repeated with replacement bottles.
4. Plug in the water dispenser.
5. Set the power switch at the rear of the dispenser to the ON position
6. Ready-to-dispense indicator lights will come on when water reaches
optimum temperatures and is ready for use.
.
1. Make sure the unit is unplugged and power switch is
turned off.
2. Remove the bottle support funnel, saturate a clean cloth with water
dispenser cleaner or vinegar and wipe the inside of the reservoir.
3. Pour water dispenser cleaner or a mixture of 0.3 gal / 1 L of vinegar
with 0.3 gal / 1 L of hot water into the reservoir and wait 20 minutes.
6

To remove, take the grill off the tray and firmly li the tray up, dislodging
it from the guides. Drain and clean.
The waste water tray should be emptied and
cleaned regularly to remove spotting and any
mineral deposits. Clean with water dispenser
cleaning solution or a mild soap and water.
For tough deposits, add vinegar and let it soak
until the deposits come loose. Then wash, rinse
and dry thoroughly.
To replace, put the grill back on the tray and
slide the tray onto the guides.
The outside of the dispenser can be wiped clean with water dispenser
cleaning solution or a mild soap and water. Never use harsh chemicals or
abrasive cleaners. Rinse thoroughly with clean water and then dry surfaces.
CLEANING THE OUTSIDE OF THE WATER DISPENSER
CLEANING THE WASTE WATER TRAY
CLEANING AND MAINTENANCE
Like most appliances, your new water dispenser requires periodic maintenance
to operate efficiently. Your water dispenser must be cleaned every 4 months.
Please note that as per your warranty, routine maintenance of the dispenser
is required. Failure to maintain the water dispenser will void your warranty.
IMPORTANT: Make sure you turn the power switch to the OFF position and
unplug the dispenser before performing any of the following cleaning
procedures.
CLEANING YOUR WATER DISPENSER
9
CHILDPROOF SAFETY FEATURE - IN HOT & COLD MODEL ONLY
To prevent hot water from accidentally harming a child, the hot water
dispenser button has a safety switch on it. Available in some models only.
DANGER: The hot water is heated to approximately 194˚ F / 90˚ C.
Temperatures above 125˚ F / 52˚ C can cause severe burns from scalding.
DO NOT ALLOW CHILDREN TO USE THE HOT WATER DISPENSING
BUTTON WITHOUT PROPER AND DIRECT SUPERVISION.
ADJUSTING THE TEMPERATURE (COLD WATER ONLY)
By turning the thermostat at the back of the unit, the
temperature can be adjusted. If the water dispenser is
not dispensing water, there could be a possible ice build
up due to the thermostat being set too cold. If this
happens, unplug the dispenser overnight and then reset
the thermostat. The thermostat knob is behind the OK
tested sticker at the back of the machine. Remove the
sticker and turn the knob clockwise to make the water
colder and anti clockwise to make it warmer.
O
Please note that the cold water thermostat has been factory adjusted to 11 C.
Avoid adjusting the thermostat unless required.
OK
TESTED
R
E
M
R
A
W
Reset Thermostat
HOT WATER TEMPERATURE – IN HOT & COLD MODELS ONLY
The temperature of the hot water in the dispenser maintained
by a preset automatic thermostat set at 85 °C and cannot be
adjusted manually by user.
There is also a manual reset safety thermostat set at 95 °C.
If there is no water in the hot tank and the hot water switch is
turned on by mistake, the manual safety button on the safety
thermostat will trip. In such an event, the reset button needs to
be preset as shown in picture (lower one on the tank) needs
to be pressed as shown in the picture.
8
CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out,
this appliance must not be supplied through an external switching device, such as a
timer or connected to a circuit that is regularly switched on and off by the utility

IMPORTANT!
Turn power switch to the OFF position
and unplug the dispenser before performing this procedure. Dispense hot
water until temperature drops to a safe level to avoid the risk of scalding.
1. Remove the water bottle.
2. Press all dispensing buttons until water no longer comes out.
3. Place a bucket beneath the drain outlet on the back of the dispenser.
4. Remove the cap and plug from the drain valve (in hot & cold model only)
and let the water flow into the bucket.
Replace the cap and plug. A screwdriver or coin can be used to help loosen
the drain cap. Collect the water in a container, not the drip tray.
5. Replace the water bottle.
Drain the tank before and after cleaning, when
going on long vacations or if not using the
dispenser for long periods of time.
DRAINING THE TANK
Drain
outlet
Vacuum or sweep away the dust from the
condenser coils at the back of the dispenser.
For best results, you can purchase a brush
designed specifically for this purpose from your
local appliance store. This will improve cooling
and efficiency.
CLEANING THE CONDENSER
LED FUNCTION INDICATORS
Heater is in operation
The hot water has reached
its opt i m u m temperature
and is ready for dispensing
The cold water compressor
is in operation
Blue/
Green
Yellow “ON”
“ON”
“ON”
The cold water has reached
its opt i m u m temperature and
is read for dispensing
The cold water compressor
is in operation
Power on
Red
For Hot & Cold model For Normal & Cold model
LED Status
10
11
Accessories shown may not be part of standard equipment.
Actual design, colour and specications may vary from the images shown.
BIG
PLUS
300*330*1135
375*405*1165
15.65
18.5
300*330*980
375*405*1010
13.8
16.1
No. of Faucets
Power Source
Cooling Capacity (liters per hour)
Power Cold (watts)
Refrigerant
Heating Capacity (liters per hour)
Power Hot (watts)
Condenser
Unit Dimensions (in mm)
Package Dimensions (in mm)
Net Weight (in kg)
Gross Weight (in kg)
2
3
90
500
Static
BLUE
300*330*980
375*405*1010
13.6
15.8
Floor
Standing Cooling
Cabinet
Table
Top
2
3
130
500
Static
2
3
90
500
Static
300*330*980
375*405*1010
16.7
19
300*330*500
375*405*530
12
13.6
3
5
130
500
Static
3
5
130
500
Static
220V/1P/50Hz
R 134 a CFC Free
DESCRIPTION
MODEL
0
<_ 90 C, 5 liters/hr
FROSTY
PLUS
JUMBO PLUS
3
220V/1P/50Hz
10
150
R 134 a CFC Free
0
<_ 90 C, 5 liters/hr
500
Fan Cooled
300*330*1135
3 *405*116575
19.25
22.10
SUPER
3
220V/1P/50Hz
10
150
R 134 a CFC Free
0
<_ 90 C, 5 liters/hr
500
Fan Cooled
360*345*1145
435*420*12 01
25.45
28
DESCRIPTION
MODEL
No. of Faucets
Power Source
Cooling Capacity (liters per hour)
Power Cold (watts)
Refrigerant
Heating Capacity (liters per hour)
Power Hot (watts)
Condenser
Unit Dimensions (in mm)
Package Dimensions (in mm)
Net Weight (in kg)
Gross Weight (in kg)
300*330*535
375*405*570
12
13.75
No. of Faucets
Power Source
Cooling Capacity (liters per hour)
Power Cold (watts)
Refrigerant
Heating Capacity (liters per hour)
Power Hot (watts)
Condenser
AIRPRESS
300*330*1020
375*405*1050
14.65
17.50
Floor
Standing Cooling
Cabinet
Table
Top
3
3
130
500
Static
3
3
90
500
Static
300*330*1020
375*405*1050
17.8
20.6
300*330*535
375*405*570
13
14.8
PRIME
Floor
Standing Cooling
Cabinet
Table
Top
3
3
90
500
Static
3
3
130
500
Static
3
3
90
500
Static
220V/1P/50Hz
R 134 a CFC Free
Unit Dimensions (in mm)
Package Dimensions (in mm)
Net Weight (in kg)
Gross Weight (in kg)
DESCRIPTION
MODEL
0
<_ 90 C, 5 liters/hr
3
3
90
500
Static
300*330*1020
375*405*1050
16.9
19.5
300*330*1020
375*405*1050
13.75
16
TECHNICAL SPECIFICATIONS

12
Funnel
Front Upper
LEDs
Tap Cover
Hot Water Outlet
Normal Water Outlet
Cold Water Outlet
Waste Water Tray
Front Lower
Cold Switch
Hot Switch
Power Cord
Condenser
Earthing 
Drain Outlet
PARTS NAME PARTS NAME
S.NO.S.NO.
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
EXPLODED VIEW OF MACHINE
PARTS IDENTIFICATIONS - AIRPRESS
10
11
12
13
15
1
3
4
5
6
7
9
2
8
14
13
Funnel
Front Upper
Hot Water Outlet
Normal Water Outlet
Cold Water Outlet
Waste Water Tray
Refrigeration Middle Tray
Cabinet Door
PARTS NAME S.NO.
01
02
03
04
05
06
07
08
EXPLODED VIEW OF MACHINE
PARTS IDENTIFICATIONS - PRIME
1
2
4
5
6
7
3
8

14
TROUBLESHOOTING TIPS
Water dispenser
or dispensing tap
is leaking
Small pin hole or crack in the bottle,
(common with recycled water
bottles).
Drain cap and silicone seal are
not secure.
Water was poured directly into bottle
support funnel and overflowed.
Water is not hot or
cold enough
All the water in the tank has been
used.
The unit is unplugged.
The circuit breaker in your home is
tripped or the fuse has blown.
Power switch not turned ON at
back of unit.
Temperature manual thermostat
tripped.
Water dispenser
is not dispensing
water
Empty water bottle.
Possible ice build up due to
thermostat set too cold.
Water dispenser
is noisy
Bottle making a gurgling noise as it
fills the tank.
Conduct water bottle leak test
as outlined in manual.
Ensure seal is secure in drain
plug an d tighten drain cap.
Drain by pressing dispenser buttons.
Replace with full bottle and wait 30
minutes for the water to heat or cool.
Plug it into the outlet.
Reset the breaker or replace the fuse.
Turn switch to the ON position.
Rotate knob using screwdriver
clockwise to increase cooling and
anti clockwise decrease cooling.
Replace with full bottle.
Make sure the dispenser is on an even
surface that can support its full weight.
Unplug overnight, then reset. Reduce
thermostat setting.
Hot water
Cold water
Thermostat needs to be adjusted
for colder water.
Press the reset button on manual
thermostat.
This is normal.
Water dispenser is uneven.
POSSIBLE CAUSE PROBLEM SUGGESTED SOLUTION
15
TROUBLESHOOTING TIPS AIRPRESS
How much Mode Airpress
come with
Atlantis Airpress come with ON/OFF mode
(By Default) with blue LED continuously
glowing, where show finger to START and
show finger to STOP. Second one is steady
mode where show finger to START otherwise
STOP.
How Can We Change the
Mode
For switching ON/OFF mode to steady mode,
Air-press the hot water and cold water for
10 seconds and Hot water and cold water LED
blinks for 5 seconds. Repeat the same process
switching steady mode to ON/OFF mode.
What is Child Lock
In child lock, dispense hot water by Air-press
hot water two times within 2 seconds and red
LED blinks continuously.
How to activate Child
Lock
By default child lock is inactive, to activate
child lock, Air-press the hot water and normal
water together for 10 seconds and hot and
normal LED blinks for 5 Seconds.
Why water dispense OFF
automatically
By default 6 seconds dispense timing is activate
and OFF after 6 sec. But setting can be change
to 3 seconds.
How can change
dispense setting 6
second to 3 second
To activate 3 second setting, Air-press thecold
water and normal water together for 10 seconds
and cold and normal LED blinks for 5 seconds.
PROBLEM/FEATURE DESCRIPTION
Important: If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order
to avoid a hazard.

16
FREQUENTLY ASKED QUESTIONS
Q . WHY IS MY WATER DISPENSER LEAKING?
A: If you are experiencing a leak with your water dispenser please do the
following to see if the water bottle or the dispenser is leaking.
ATTENTION: Do not return this product to the store. For questions on
operation, assembly or parts, please contact us at authorised service centre.
Consumer or bulk consumer should channelize e-waste generated by them
to authorized collection centre or registered dismantler or recycler.
Bulk Consumer should maintain records of e-waste generated by them.
Consumer shall ensure that e waste is not being drooped in garbage bin
containing waste destined for disposal.
DISPOSAL OF MACHINE:
All electrical/electronics components shall be considered as e-waste so
after completing the life cycle, consumer shall dismantle the machine,
differentiate the e-waste and other waste then dispose according to waste
management rule.
17
A.: Water dispensers feature a “puncturing tube” as part of the bottle support
funnel, providing added convenience for water bottle installation. Depending
on the water bottle supplier, a small opening may or may not be present in the
bottle cap for this specific purpose. If the puncturing tab is not present, the
entire bottle cap must then be removed to eliminate possible damage to the
puncturing tube. If the opening is present, remove the protective seal prior to
installing the bottle.
1. Unplug the unit, turn off power switch and remove the bottle.
2. Remove the bottle support funnel and check the water level inside the
reservoir – it should be at roughly three-quarters full.
Water level should be approximately 3/4” – 1” BELOW VENT TUBE.
3. Let water sit for 2 hours. If the dispenser does not leak, it is the bottle
that is leaking due to a small crack or pinhole and it needs to be replaced.
If the dispenser is leaking, please contact authorized service centre.
A.: As with most new appliances such as coffee makers and kettles, there is
often a plastic taste upon initial start-up of the unit. To remove this taste,
simply follow the cleaning instructions outlined in Initial Product Cleaning
Procedure.
Q: WHAT IS THE SPIKE THAT GOES INTO THE BOTTLE?
Q.: WHY DO I GET A PLASTIC TASTE FROM MY DISPENSER?
Q.: WHAT DO THE READY-TO-DISPENSE INDICATOR LIGHTS MEAN?
A.: When illuminated, they mean the following:
BLUE/
GREEN
YELLOW “ON”
“ON”
“ON”
The cold water has reached
its op t im u m temperature and
is ready for dispensing
The cold water compressor is
in operation
Power on
RED
FOR NORMAL & COLD MODEL
LED STATUS
Heater is in operation
The hot water has reached
its op t im u m temperature and
is ready for dispensing
The cold water compressor
is in operation
FOR HOT & COLD MODEL

18
1. This warranty card has 2 parts. Kindly ensure that the Merchant fills both parts
correctly.
2. Part A is the customer’s copy. It should be retained by you for your record.
3. Part B must be torn and mailed to the company’s address (mentioned there itself.).
4. In the event of a defect developing in the product, contact the Merchant./ company
for obtaining warranty service by informing defect, model & serial no. and date of
purchase.
5. On receiving your complaint, trained technician will call on you promptly. In the
unlikely event of the technician deciding that the product requires attention at
customer care center, kindly arrange to deliver the machine to the customer care
center for further action.
WARRANTY CARD
This product is covered under a one year warranty to be free from defects in workmanship and
material under normal use and service for a period of 12 months from the date of purchase.
1. The guarantee extended herein is limited to the repair and/or replacement of defective part ’s, and
the manufacturer would not be responsible for any consequential liability/damage/loss arising due to
such defects.
2. Warranty card duly filled in and stamped by the dealer, along with a copy of the invoice should be
produced for any warranty claims. All expenses incurred in sending and collecting the unit or part
thereof from the authorized service center will be payable by the customer
3.T his warranty does not cover accessories such as mains cord, relay, funnel and plastic parts.
4. The warranty is void if :
a) It is found that the unit has been subject to unauthorized installation or repair.
b) The voltage of the power supply is not within the specified limited (230 V 50Hz +10%)
_
c) Damage is caused during transit, due to accident, flood, fire, other natural hazards, neglect or
misuse.
5. Any liquid except water is used in the container.
6. The defective parts must be sent to the company, freight prepaid and insured, for the company’s
examination and satisfaction that they are defective. Return freight and insurance on such
repaired/replacement parts plus any excise duty and taxes/levies will be extra.
7. Failure/deterioration of any part/assembly arising, in the company’s opinion by reasons of shifting to
another location, accident, alteration, abuse/misuse, substitution of original part’s with unauthorized
part’s or any damage caused by fire/flood etc, or exposure to weather conditions, are not covered
under this warranty.
8. This warranty will continue to be in force for the term herein specified irrespective of any
replacement parts which may be provided under warranty and such replacement parts shall not
carry any fresh warranty.
WARRANTY INSTRUCTIONS FOR USER
19
Model No. :
Serial No. Date of Purchase :
Customer’s Signature Dealer’s Signature & Stamp
CUSTOMER DETAILS
Customer Name & Address
Tel :
Dealer Name & Address
Tel :