Atleisure UMB-M70633 Guide

9ft Crank & Tilt Market Umbrella
w/ Sunbrella® Fabric
Assembly, Care & Use Manual
IMPORTANT, RETAIN FOR FUTURE REFERENCE:
READ CAREFULLY
UMB-70633
Item: M70633
Model: UMB-M70633
Toll Free: 1-855-880-7205 (English is offered)
8am - 5pm, Monday through Friday, Eastern Standard Time
DO NOT RETURN TO STORE
For outdoor domestic use only. Not for commercial use.
Designed in USA
Made in China
For assistance with assembly, parts, or customer service, please contact:

2
Contents
Package Contents
Package Contents
Assembly and Use
Care and Maintenance
Warning and Cautions
2
Preparation 2
3-4
5
5
Frame Warranty 5
Sunbrella®Fabric Warranty 6
Replacement Parts 6
Please lay out all parts prior to assembly to make sure all parts are present.
A
B
Part Description Quantity
A Umbrella Frame with Canopy 1
B Finial 1
C Bottom Pole 1
C
CAUTION: Do not use sharp tools to remove the protective material,
as it may damage the product.
Before beginning assembly of product, make sure all parts are present.
Compare parts with package contents listand diagram above.
Estimated Assembly Time: 5 minutes
Tools required for Assembly: No tools required
Preparation

Assembly and Use
Step 1: If not attached, align finial (B) to threading on top of umbrella frame (A)
and turn clockwise (to right) to lock into place. Do not over-tighten.
Step 2: Attach bottom pole (C) to umbrella frame (A), then tighten in clockwise
direction. Do not over-tighten.
Clockwise
3

Assembly and Use
Step 3: Turn crank handle in clockwise direction (to right) until canopy is fully
opened. Turn crank handle in opposite direction to close canopy and secure
with attached strap. To close the umbrella, it must be in the upright position.
You can tilt the umbrella to the right or left by pressing the tilt button to re-
lease the umbrella top. Release the button to maintain desired angle.
Step 4: Insert umbrella into a heavy umbrella base no less than 50 lbs (not
included). Tighten locking nut on side of base to safely secure umbrella.
Crank Handle
Turn clockwise
Tilt Button
4

Care and Maintenance
Warnings and Cautions
Frame Warranty
See enclosed Sunbrella® care and cleaning label sewn into interior side of canopy.
DANGER : Keep children out of the assembly area during assembly.
WARNING: Read the entire instructions before beginning and follow the
steps outlined. Failure to assemble and install as instructed could result in
the umbrella tipping over, causing personal injury and/or property damage.
WARNING: Do not use this umbrella during periods of high winds and rain.
Failure to do so may result in personal injury and/or damage.
CAUTION: Assemble and use umbrella on flat surfaces. Keep umbrella away
from glass tabletops during windy conditions to prevent breakage.
INFORMATION: Recommend inserting the umbrella into an umbrella base
that is no less than 50 lbs (not included) to secure umbrella in upright position.
INFORMATION: Close the umbrella and use the canopy ties when umbrella
is not in use.
INFORMATION: Schematics in this manual are for assembly and operation
illustration only. They may differ from the umbrella’s actual appearance.
90 DAY WARRANTY
This product is covered under a manufacturer’s 90 day warranty from date of
purchase against defects in materials and workmanship. This warranty does not
cover damage due to neglect, abuse or weather related damage. For full warranty
disclosure, email us at customerser[email protected], call toll free at 1-855-880-
7205 or send mail to: 1040 Boulevard SE Ste. B, Atlanta GA 30312
HOWTO FILE A CLAIM
If you are within your warranty you must have your receipt and pictures of your
information to send to ATLeisure at [email protected], or send by mail
to 1040 Boulevard SE Ste. B, Atlanta GA 30312. This warranty gives you specific legal
rights, and you may also have other rights which vary from state to state.
5

6
Replacement Parts
5-YEAR LIMITED PRODUCT WARRANTY
WARRANTY GUIDELINES
This warranty applies to the original purchaser of Sunbrella Horizon and is subject to
inspection. During the first 3 years, if Sunbrella Horizon product becomes unserviceable
due to loss of strength or color from normal usage and exposure, any warranty claim
may be eligible for up to $40 in labor costs per linear yard in addition to replacement product.
During years 4 and 5, Sunbrella will provide replacement product only.
For warranties to go into effect, Sunbrella requires a sample of the product in question and
must be given the right to inspect the product. Damage resulting from the following is not
covered under warranty:
•Improper installation or cleaning;
•Excessive staining due to gear lubricant, ink, lipstick, motor oil, iodine, betadine,
tomato-based sauces or sun lotion;
•Discoloration caused by exposure to steam
•Discoloration due to the presence of amines in adjoining foam or adhesives; or
•Normal wear and tear.
Warranties apply only to the top side of the product and do not apply to other items that may
be present in an installation (e.g. foam, sewing thread, plywood, etc.). The warranty period
begins from the date an original equipment manufacturer installed the product, or the date
the product was sold to an aftermarket manufacturer. Sunbrella may, in its discretion,
recommend remedial methods, such as professional cleaning or repair to be done at the
consumer’s expense, in lieu of replacing the product.To get warranty service, please contact
the dealer or retailer from whom the product was purchased. The original purchaser will
contact the manufacturer of the item purchased who will then contact Sunbrella.
For replacement parts, call our customer service department at:
1-855-880-7205, 8am - 5pm EST, Monday - Friday.
Part Description Re-order Number
ACANOPY (INDIGO)
CANOPY (CHERRY)
CANOPY (MUSHROOM)
UMB-M70633-CAN-IN
UMB-M70633-CAN-CH
UMB-M70633-CAN-MU
B FINIAL UMB-M70633-FNL
C BOTTOM POLE UMB-M70633-BMP
ATLeisure, LLC
1040 Boulevard SE, Suite B
Atlanta, Georgia 30312, USA
Customer Service Toll Free 1-855-880-7205
8am - 5pm Eastern Time, Monday through Friday
www.atleisure.com
Sunbrella® Fabric Warranty